green hacks

809 Articles

Steam Cycle Feels Like Your Pants Are On Fire

January 8, 2011 by 54 Comments

Usually we don’t like to feature projects that have zero build details, saving them instead for a links post. But this steam-powered bicycle is too… peculiar to pass up. In between the rider’s legs is the firebox that contains a wood-fueled fire. Watch the clip after the break and you’ll find just how noisy this contraption can be. In addition to the mid-range “chug-a chug-a” there’s also the constant whistle we’d attribute to the pressure regulator. It’s surprising that the whole bike doesn’t heat up, but it must not be all that bad since the test pilot isn’t wearing asbestos pants. All kidding aside, it looks like this beast has no problem getting up to a running pace (based on the movements of the camera) and that’s thanks to a renewable energy source.

We’d be much more comfortable seeing this in a mechanized tandem form factor since we just can’t get over having a fire between our legs.

Continue reading “Steam Cycle Feels Like Your Pants Are On Fire” →

Hacking A Hack: Electric Hybrid Geo Metro

January 5, 2011 by 54 Comments

[Ben Nelson] turned his electric Geo Metro into a plug-in hybrid. But wait, where’d he get an electric Geo Metro? It seems that we’re one hack behind [Ben], who converted the vehicle to all electric back in 2008 using a forklift motor and some batteries. This time around he’s following the Chevrolet Volt’s example by adding a backup generator. Instead of going with a gasoline power he added a tank of propane and the generator from a Recreational Vehicle. This won’t put out enough juice to drive while the generator is running, but you can use it to extend your traveling range by pulling over for a nap while it tops off the batteries.

A Tricycle Built For Plowing

December 29, 2010 by 27 Comments

What do you get when you combine two bikes, a couple levers, and a home made wooden shovel? Why, a light duty tricycle plow, of course! [Craig] of Firefly Workshop cobbled together this contraption to assist him in shoveling his 90′ driveway when a few inches fall. More convenient than a normal shovel, and much more environmentally friendly than his 8 Horsepower snow blower, this trike looks like it could actually make shoveling the snow fun. Not really much more here than meets the eye, we just wish we had a video to share of this sweet ride in action.

Clamp Sensor Power Monitoring

December 21, 2010 by 45 Comments

[Bill Porter] has joined in the pursuit of an inexpensive yet effective way to monitor his power usage. He calls his project the Not So Tiny Power Meter, and shared both his successes and follies involved in seeing it through to implementation. There are problems; sizing issues with enclosures and his PCB, issues with noise when measuring low-current signals with the clamps, and even some wireless communications issues. But it looks like he’s got the system running despite these hurdles. Right now it streams data wirelessly so that he can display the current energy consumption, but he plans to add Google Power Meter functionality next.

We’ve seen commercial units using the same sensing principles that have been hacked to show data online.

Power All Over Your Body

December 3, 2010 by 19 Comments

We know that you can transform the mechanical motions of your body into electrical energy, like when you turn the crank or shake a mechanically-powered flashlight. These types of mechanical motions are quite large compared to many of the day-to-day (and minute-to-minute) actions you perform–for example walking, breathing, and thumb wrestling.

What if we could harvest energy from these tiny movements? Researchers at the Korea Advanced Institute of Science and Technology are seeking the answer to this question with piezoelectric barium titanate. The electrical output of their devices is very small (in the nanoAmps) but over a long period and over many repetitions it would be possible to run a small electric device–even a biologically-embedded one. An alternative to blood power?

There is clearly a lot of potential in this technology, and we’ll be interested to see if and when we can start messing around with this stuff. Heck, it’s already been used to power a small LED and you all know just how much everyone would jump at the chance to cover themselves in self-powered LEDs…

Global Village Construction Set

November 18, 2010 by 56 Comments

The Global Village Construction Set is an open hardware initiative aimed at sharing tool-building knowledge. They believe that to build civilization you need forty basic tools, eight of which they’ve already prototyped and made available on their wiki. Included in these is a tractor which reminds us of a beefy bobcat. It has a soil pulverizing attachment which can be used to break down soil and feed it to their soil brick compressor. That machine spits out compressed dirt bricks which are used as building materials. They’re stacked on concrete footings and then limewashed to protect the un-baked bricks from water erosion. Does this remind anyone else of real-life Minecraft?

Above you can see a group of Open Source Ecology developers showing off bricks in front of the machine that made them, with the tractor/soil pulverizer to the right. Take a look at the videos about the construction set and brickmaking after the break. And learn more by perusing their weblog.

If you think an apocalypse is on the way you might want to buddy-up with these folks. They seem to know what they’re doing.

Continue reading “Global Village Construction Set” →

How To Weigh A Bee Hive

November 16, 2010 by 14 Comments

Did you know weighing bee hives was even necessary? Of course it is. Monitoring hive weight can tell a beekeeper a lot about the size of the swarm, their harvesting habits, and the yield they are producing.

We had to cover this hack because it’s a fine piece of engineering. [Trearick] designed a bee hive scale that lifts one side of the hive to calculate weight. Using easy to find metal brackets, a hinge, a pulley, and some plywood he built a prying device. The three teeth slip in between the hive and its base and can be separated by squeezing together the plywood handles on the opposite side. This lifts one end of the hive, measuring the force needed to do so using a luggage scale. The readout should be roughly 1/2 the total hive weight. This measurement takes seconds to complete, uses a bulb level on the scale to help ensure consistency, and creates little or no disturbance to our flying friends.

It’s nice to see a Hymenoptera hack that helps in giving bees a healthy place to live, instead of killing wasps.