Super Game Boy Boot ROM Dumped

gameboy_boot_rom_dump_hardware

[Costis] managed to dump a copy of the boot ROM for the Nintendo Super Game Boy. This small piece of code (256 bytes) writes a graphic to the display at boot time as it loads the ROM on the game cartridge. He was able to dump the code by finding the exact point at which the device locks down the boot ROM. Just as that point approached he overclocked the device causing it operate so fast it couldn’t write the lockout bits into the register. Once past that single point of security, he executes a code that writes the boot rom out to a different address that he is able to read from. He’s got a copy of the dump along with the explanation up for your enjoyment.

[Thanks Anthony]

Game Boy HDD Update: The Guts

gameboy_hdd_cover_image

Last week we showed you the ingenious hard drive enclosure made from a broken Game Boy. We caught up with [_n3o_], the person responsible for this mod, and he was nice enough to share some pictures of the inside of the project. Let’s get down to business and take a look. Continue reading “Game Boy HDD Update: The Guts”

80 Gig Drive Inside A Game Boy

[_n3o_] put together a nice external storage mod by fitting a 2.5″ drive into a broken Game Boy. This mod fooled quite a few people because it appears that the device still plays games with the drive stuffed inside of it. Sadly, this is not the case. The reflective backing has been removed from the screen and replaced by a piece of paper with a graphic printed on it. The LED from the hard drive was moved to the battery indicator for the Game Boy for added realism. There is no build log for this project but [_n3o_] did give a short explanation of it in a forum post. You can see two more pictures of the project after the break. Continue reading “80 Gig Drive Inside A Game Boy”

Game Boy Pocket Backlight

gameboy

[palmertech] and [Bibin] have both completed backlight projects for the Game Boy Pocket recently. The most difficult part of the transplant is carefully removing the reflective backing on the LCD. After a thorough cleaning, a diffuser and backlight panel were added. [palmertech] used a backlight salvaged from a DS, while [Bibin] built his own using LEDs. You can see his backlight in the video embedded below. There’s a disassembly video too.

Continue reading “Game Boy Pocket Backlight”

GameBoy Color In A TI-83

gb_ti

[Mark] had a broken TI-83 graphing calculator and an overwhelming urge to play Pokemon in math class. The solution to his predicament, obviously, is to hack a GameBoy color into the body of his TI-83. He gutted the calculator and connected the front buttons to the contacts on the GameBoy. After some cramming and taping bits together, he got it all working. Now he just needs to find a way to make the cartridge a little bit less conspicuous.

[via Make]

Arduino Gameboy Killer

[youtube=http://www.youtube.com/watch?v=OgKSLxRPtu8]

For roughly $250, you too can have this sweet bit of gadgetry based off of the Arduino platform. It is open source, and has some pretty impressive specs. Sporting a rumble pack, lithium ion battery, OLED display, and space for expanson. You can buy the pieces pre assembled, or as a kit. If you get the kit, you’ll see that the controller board has been laid out so that you can solder your buttons and joystick in as either left handed or right handed. The only problem? No games yet.