Hackaday Podcast 212: Staring Through ICs, Reading Bloom Filters, And Repairing, Reworking, And Reballing

It was quite the cornucopia of goodness this week as Elliot and Dan sat down to hash over the week in hardware hacking. We started with the exciting news that the Hackaday Prize is back — already? — for the tenth year running! The first round, Re-Engineering Education, is underway now, and we’re already seeing some cool entries come in. The Prize was announced at Hackday Berlin, about which Elliot waxed a bit too. Speaking of wax, if you’re looking to waterproof your circuits, that’s just one of many coatings you might try. If you’re diagnosing a problem with a chip, a cheap camera can give your microscope IR vision. Then again, you might just use your Mark I peepers to decode a ROM. Is your FDM filament on the wrong spool? We’ve got an all-mechanical solution for that. We’ll talk about tools of the camera operator’s trade, the right to repair in Europe, Korean-style toasty toes, BGA basics, and learn just what the heck a bloom filter is — or is it a Bloom filter?

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download your own personal copy!

Continue reading “Hackaday Podcast 212: Staring Through ICs, Reading Bloom Filters, And Repairing, Reworking, And Reballing”

Hackaday Podcast 211: Pocket Sundial, Origami Llama, PCB Spacemouse

This week, Editor-in-Chief Elliot Williams and Contributor Emeritus Kristina Panos chewed the fat about the coolest hacks of the previous week. But first, a bit of news — our Low Power Challenge fizzled out this week, and boy did we have a lot of entries at the last minute. We love to see it though, and we’re going to get judging ASAP.

Don’t forget, this weekend is Hackaday Berlin! Livestreaming for this one may be iffy, but we’ll have the talks up for you eventually, so don’t fret too much if you can’t make it in the flesh this time.

Kristina definitely got What’s That Sound this week, but her answer will of course be bleeped out. Then it’s on to the hacks, beginning with a 6-DoF controller that does everything in interesting ways and a printed shredder that eats like a goat. From there we cover bolt dispensers, coffee grinders with Bluetooth weighing, camera calibration, and a $50 pen plotter that’s definitely a hack. Finally, we discuss the virtues of physicality when it comes to SIM cards and recorded music.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in  the comments!

And/or download it and listen offline.

Continue reading “Hackaday Podcast 211: Pocket Sundial, Origami Llama, PCB Spacemouse”

Hackaday Podcast 210: Living In The Future, Flipper Mayhem, And Samsung Moons The World

Editor-in-Chief Elliot Williams is joined this week by newly minted Development Editor (and definitely not brother) Al Williams to bring you the weekly highlights from our little corner of the Internet. Between the rapidly approaching deadline for the Low-Power Challenge to Samsung creating a fake Moon with artificial intelligence, there’s plenty in the news to get this episode started. From there, the Williams plural discuss using a webcam for cheap virtual reality thrills, an impressive expansion for the Flipper Zero, and whether or not finding a bug in the Nintendo DSi browser counts as retrocomputing. Stick around to hear about the fascinating work Joshua Vasquez has been doing with DIY light guide plates, and Arya Voronova’s deep-dive into PCI-Express.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download, download, download!

Continue reading “Hackaday Podcast 210: Living In The Future, Flipper Mayhem, And Samsung Moons The World”

Hackaday Podcast 209: HDMI Tempest, Norm Upscaled, Seeing Electrons, And When The Radios Go Silent

It was one of those weeks, where Elliot and Dan found a bounty of interesting hacks to choose from for the podcast, making it hard to pick. But pick we did, and we found so many deep and important questions. What good is a leaky HDMI cable? Good for falling down a TEMPEST-like rabbit hole, that’s what. Why would you use a ton of clay to make a car? Because it’s cool, that’s why. What does an electron look like? A little like a wiggling wire, but mostly it looks like a standing wave… of waves.

Is artificial intelligence going to take over all the code and start suing us for copyright violations? Maybe yes, maybe no, but we’re definitely in a strange, new world. And when all our media is on demand, what is the spectrum that broadcasters currently use going to be good for?

It’s not all heavy questions, of course; we found a lot of fun hacks, like an extreme drill press makeover, a couple of low-power cyberdecks, the return of Norm Abram in glorious AI-generated HD, getting up close and personal with flip dot displays, and a sled that lets you go uphill as easily as going downhill.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download your own personal copy!

Continue reading “Hackaday Podcast 209: HDMI Tempest, Norm Upscaled, Seeing Electrons, And When The Radios Go Silent”

Hackaday Podcast 208: Hallucinating Robots, Floppy Cartridges, And A Flexure Synth French Horn

This week, Editor-in-Chief Elliot Williams and [former Assignments Editor] Kristina Panos stood around talking about the greatest hacks of the previous week. But first, we’ve got a contest running now through March 21st — the Low Power Challenge!

Kristina almost got What’s That Sound this week, but could only describe it as some sort of underwater organ, so still no t-shirt for her. But [BalkanBoy] knew exactly what it was — the Zadar Sea Organ in Croatia. Then it’s on to the hacks, beginning with the most beautiful sea of 7-segments you’ll likely ever see. We gush over a tiny PC in a floppy drive that uses custom cartridges, dish about an expressive synth that uses a flexure mechanism, and enjoy a loving ode to the vacuum fluorescent display.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in  the comments!

And/or download it and listen offline.

Continue reading “Hackaday Podcast 208: Hallucinating Robots, Floppy Cartridges, And A Flexure Synth French Horn”

Hackaday Podcast 207: Modular Furniture, Plastic Prosthetics, And Your Data On YouTube

Join Editor-in-Chief Elliot Williams and Managing Editor Tom Nardi as they explore the best and most interesting stories from the last week. The top story if of course the possibility that at least some of the unidentified flying objects the US Air Force valiantly shot down were in fact the work of amateur radio enthusiasts, but a quantitative comparison of NASA’s SLS mega-rocket to that of popular breakfast cereals is certainly worth a mention as well.

Afterwards the discussion will range from modular home furnishings to the possibility of using YouTube (or maybe VHS tapes) to backup your data and AI-generated Pong. Also up for debate are cheap CO2 monitors which may or may not be CO2 monitors, prosthetic limbs made from locally recycled plastic, and an answer to Jenny’s Linux audio challenge from earlier this month.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download it your own bad self!

Continue reading “Hackaday Podcast 207: Modular Furniture, Plastic Prosthetics, And Your Data On YouTube”

Hackaday Podcast 206: Busted Crypto Killed The Queen, Kicad’s New Clothes, Peer Inside The Sol 20

Under the weather though they both were, Editor-in-Chief Elliot Williams and Staff Writer Dan Maloney got together to take a look under the covers of this week’s best and brightest hacks. It was a banner week, with a look at the changes that KiCad has in store, teaching a CNN how to play “Rock, Paper, Scissors,” and going deep into the weeds on JPEG.

We dipped a toe into history, too, with a look at one of the sexiest early hobbyist computers, seeing how citizen scientists are finding ancient burial mounds, and looking at the cryptography that cost a queen her head. Rather look to the future? We get it — which is why we talked about a greener, cleaner way of making hydrogen from methane, as well as a generatively designed five-axis 3D printer. From laser-precise knife sharpening to circuit simulation with Python to clear plastic TVs of the 1930s, there’s something for everyone!

Download the podcast in case our servers get unlucky.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Continue reading “Hackaday Podcast 206: Busted Crypto Killed The Queen, Kicad’s New Clothes, Peer Inside The Sol 20”