Parts: 4×20 VFD Character Display (NA204SD02)

July 13, 2009 by Ian 24 Comments

futuba-serial

Futaba makes vacuum florescent character displays that can be used as a drop-in replacement for common character LCDs. VFDs have a wider viewing angle, and generally look cooler.

Futaba’s character displays can be interfaced using the standard 8-bit or 4-bit parallel LCD interface, or a simple two-wire protocol. The protocol type is set by resistors on the back of the display, so it’s not particularly easy to change without a hot-air rework station. Today we’ll demonstrate a serially-interfaced VFD using the Bus Pirate.

Continue reading “Parts: 4×20 VFD Character Display (NA204SD02)” →

Parts: ShiftBrite RGB LED Module (A6281)

June 29, 2009 by Ian 11 Comments

shiftbriteii

Macetech’s ShiftBrite is a high-power RGB LED coupled with an Allegro A6281 backpack. The A6281 uses three 10bit pulse-width modulators to mix millions of colors using the red, green, and blue elements in the RGB LED. Multiple modules can be chained together for bigger projects, like the ShiftBrite table.

Below the break we demonstrate a ShiftBrite module using the Bus Pirate. For a limited time you can get your own Bus Pirate, fully assembled and shipped worldwide, for only $30.

Continue reading “Parts: ShiftBrite RGB LED Module (A6281)” →

Parts: LTC2631A I2C Digital To Analog Converter

February 9, 2009 by Ian 9 Comments

ltc2640

Linear Technology’s LTC2631A-LZ8 is an 8bit digital to analog converter (DAC) with an I2C interface. This DAC can output 255 different voltages, spaced evenly between 0 and 2.5volts. We previously demonstrated the LTC2640 with a three-wire SPI interface, but this version is controlled with only two signal wires.

Continue reading “Parts: LTC2631A I2C Digital To Analog Converter” →

Parts: 1K 1-Wire EEPROM (DS2431)

December 24, 2008 by Ian 26 Comments

1keeprom-450

The Maxim DS2431 1K EEPROM is 1-Wire device that adds storage to a project using a single microcontroller pin. We previously interfaced a 1-wire thermometer, but this EEPROM is slightly different because it draws power directly from the 1-Wire bus. Grab the datasheet (PDF) and follow along while we read and write this simple 1-Wire memory.

Continue reading “Parts: 1K 1-Wire EEPROM (DS2431)” →

How-to: Read A FedEx Kinko’s Smart Card (SLE4442)

November 25, 2008 by Ian 27 Comments

Our wallets are filling up with SIM and RFID cards that contain hidden information. Using our latest project, the Bus Pirate universal serial interface, we can dump the memory from many common smart cards. In today’s How-to, we show you how to interface common smart cards, and walk you through the data stored on a FedEx Kinko’s prepaid value card.

Continue reading “How-to: Read A FedEx Kinko’s Smart Card (SLE4442)” →