Boxee And Apple TV

January 29, 2009 by Eliot 11 Comments

boxee

We’ve been following Boxee (not Boxxy) since its public alpha debut last Summer. We were captivated by it. Who expected a project built off of code originally intended for hacked Xboxes would be shown on NBC’s Today Show? We’ve been promised internet connected set top boxes for years, but it seems like Boxee is here to stay for two solid reasons: 1. It’s free. 2. Major content providers have finally figured out how to publish online and Boxee supports them. You can replace your network television with on demand content from Hulu, ABC, and the like.

One of the most affordable platforms currently supported by Boxee is the Apple TV. Lifehacker has a guide for installing Boxee on an Apple TV. You prepare a USB flash drive that is then used to patch the stock firmware. Once installed you can take advantage fun features like downloading torrents directly to the box.

Atari Xbox 360 Controller

January 9, 2009 by Eliot 6 Comments

3600

It’s amazing what [Ben Heckendorn] can manage to crank out in just five hours. This time it’s a wireless Xbox 360 controller stuffed inside an Atari 2600 controller. The guts are from a Guitar Hero 3 controller. It’s a fairly compact board and [Ben] used thin ATA wire for the connections. While it doesn’t have all the buttons of a true Xbox controller, this 3600 controller has enough to make it useful in arcade games. The joystick portion was reused without any modification. Things like the guide button and ring of light are located underneath.

Pelican Case Xbox 360

December 24, 2008 by Eliot 26 Comments

pelicanxbox

[Ben Heck] has put the final touches on his Pelican case Xbox 360. This prototype was constructed for use by troops stationed overseas. When he announced the project in October, he already knew some of the hurdles he would face. An industrial Velcro style product is used for all component mounting so the air/water-tight seal of the case remains intact. He sanded the surface so that it would stick better. [Ben] mentions that he ended up using less Velcro than he planned on because it held so well. Not being able to cut the case meant the DVD drive had to be converted to top-loading. The tray movement limit switches have been relocated so they now respond to lid position. He regrets not being able to motorize the lid, but let it go since this is still just the first attempt. Extra copper was added to all of the heat sinks to improve cooling. This Xbox is for sale and he’d love to hear from anyone that wants to put it into production. The write-up has a ton of pictures and you can see a video of it below.

Continue reading “Pelican Case Xbox 360” →

Finally, A Quiet Xbox 360

December 23, 2008 by Eliot 25 Comments

coolers

Frustrated by the constant din of his Xbox 360, [Janne Ström] took action. The original case wouldn’t have near enough room for the additional cooling that needed to be installed, so he picked up Lian Li’s XB01 case replacement. He followed the illustrated disassembly guide to get the Xbox stripped down to just its motherboard. He then began fitting his coolers of choice: two massive Noctua NH-U9D0 units originally intended for AMD Opterons. The asymmetric heat sinks are intended for applications like this where dual sockets could make other devices difficult to place. Clearly the hardest part of the installation was applying an appropriate amount of thermal compound and then slowly tightening the hold down screws to guarantee even pressure. The resultant system ended up being quieter than the first camera he attempted to record it with and the attached power supply. You can see a video of it below.

Continue reading “Finally, A Quiet Xbox 360” →

Xbox 360 Jasper In The Wild

December 11, 2008 by Caleb Kraft 14 Comments

jasper_5

[Ben Heck] has written up what he calls a “super unboxing” of the new jasper Xbox 360. The “jasper” refers to a new graphics processor that is supposed to be smaller and more reliable. They have been hard to find, but [Ben] shows us how to spot them. Simply look at the sticker on the back of the unit that shows voltage/current. If it uses 12.1 Amps instead of 14.2, it has the jasper.

Controller Button Marquee

December 5, 2008 by Eliot 5 Comments

controller_marque

[Ben Heck] posted an interesting one-off project he built many months ago. Video game developer Infinity Ward approached him to build a large display that indicated what buttons on a controller were being pressed. They were planning on using it during player testing by recording the board and the monitor at the same time. They could then compare the two to see if there was any disconnect between the players input and the onscreen action. Infinity Ward is the developer behind games like Call of Duty 4.

[Ben] piggy-backed the switch connections and added an external port. He used a pair of octal buffer ICs to replicate the signals and activate the LEDs. The whole board is powered by the same 3.3V line that’s used by accessories like the chat pad. The triggers have three LEDs each and are lit using a resistor ladder. [Ben] comments that since this is a newer Xbox 360 controller, the active-low button scheme makes it fairly easy to work with. There is a video of the board embedded below. Continue reading “Controller Button Marquee” →

Xbox 360 Portable

December 3, 2008 by Eliot 50 Comments

ben_heck

A couple months ago we posted [Ben Heck]’s in-progress photos of his Xbox 360 laptop (with links to his other versions). He’s just put the finishing touches on it, and dubbed it the Xbox 360 Portable. It has a removable hard drive on top and memory slots on the side. The webcam is embedded in the frame and there’s internal WiFi. With chatpads available now, he’s decided not to include a keyboard. It’s really a nice machine. Check out the video below for a tour of the system.

Continue reading “Xbox 360 Portable” →