Industrial Robots Producing Art

October 21, 2009 by Caleb Kraft 26 Comments

[blip.tv ?posts_id=2728039&dest=-1]

Here is an interesting project that should spark some good discussion. Artaic is a company that is using industrial robots to produce mosaics. They are then selling these mosaics as fine art. As you can see, some of the examples are quite nice looking. However, we have to wonder what the draw is to own one that is made by a robot. Is it really that much different from just printing an image? We really do think it is a cool project and an efficient way of producing these mosaics. We would really love to see one of those super fast delta robots doing the work.

We’re trying to reduce the negativity here at Hackaday. We are passionate geeks and hackers, and as such, we tend to jump straight to the negative points. We hope you guys will follow along with us and try to be constructive in the comments. That being said, the video did seem a bit pretentious, didn’t it?

[via BotJunkie]

Bouncy IPhone Controlled Dance Lights

October 21, 2009 by Caleb Kraft 19 Comments

[youtube=http://www.youtube.com/watch?v=4GmYcn8vb1U]

[John Boiles] introduces us to dimlet, his portable network controlled light dimmer. Inside the box is a fonera 2100 router that is running openWRT connected to an unnamed AVR microcontroller. Right now, he’s controlling the unit with his iPhone. It has three modes of control; a manual “slider” mode, an accelerometer controlled “dance” mode, and a programmable “tap” mode. You can download all the source code and schematics on his site.

[via Makezine]

Ps3 Laptop Courtesy Of Ben Heck

October 21, 2009 by Jakob Griffith 16 Comments

ps3s_hero1

[Ben Heck] may be the coolest person ever (take that [Adam Savage]). You would think that after producing so many laptop versions of gaming consoles he would grow tired or we would be bored of them. But no! We love each and every new production – including his latest laptop-ified Ps3. Not too much in the terms of ‘new’ comes from his latest article, but it does reaffirm some things including: why make what you can buy, cheap foam sheet should be purchased by the ton, and use the screws from an overheated Xbox 360 when you lose the Ps3 originals. Oh, and [Adam] we were just kidding, you know we will always love you. Check out a video after the break.

[Via Ps3Mods]

Continue reading “Ps3 Laptop Courtesy Of Ben Heck” →

Well Engineered Diy Segway

October 20, 2009 by Mike Szczys 36 Comments

diy-segway

[Mark] wanted a Segway but why buy something if you can have more fun building it? His end product is an amazing homemade version of the self-balancing transportation package. We’ve seen several projects that include auto-balance, but this one is large enough to ride on and has a bit of an advantage in the design. The motors, batteries, and other components are mounted below the wheel hubs and are weight balanced. This means that the device wants to find balance naturally, even when the electronics are switched off.

The frame was modeled in CAD and then welded together. For propulsion [Mark] has installed two 750 Watt motors which will use sprockets and chains to turn the wheels. The machine balances based on data from both a gyroscope and an accelerometer, with the entire packaged tied together using an Arduino.

[Mark’s] build log is well laid out and details each part of the build with a different post. His two most recent entries include video of the unit balancing and of him riding the 95% completed project. A big thanks to [Mark] for taking the time to document this so that we can share in the excitement of a well-executed project.

FreeBOOT Gives The Xbox 360 JTAG Hack New Life

October 20, 2009 by Mike Szczys 39 Comments

xbox360-freeBOOT-exploit

There has been another development in the never-ending battle that is Microsoft trying to keep its gaming system closed to unauthorized use. Xbox-scene reports that a new hack called freeBOOT v0.01 allows the Xbox 360 to upgrade to the newer kernels, but allows the option of rebooting to an older kernel in order use the JTAG exploit and gain access to the hardware.

In case you missed it, the JTAG hack is a way to run homebrew code on an Xbox 360. Exploiting this hack makes it possible to boot a Linux kernel in about five seconds. We’ve long been fans of the homebrew work done with XBMC on the original Xbox and hope that advances like this will lead to that end. We want this because the older hardware cannot handle high definition content at full resolution but the Xbox 360 certainly can.

This exploit is still far from perfect. It currently requires that the Cygnos360 mod chip be installed on the system. A resistor also needs to be removed from the board to prevent accidental kernel updating. That being said, this is still progress. If you’re interested in step-by-step details, take a look at the text file instructions provided.

[Thanks wdfowty]

Boombox Warns Construction Ahead

October 20, 2009 by Mike Szczys 21 Comments

construction-sign-boom-box

[Sam] built himself a boom box using salvaged parts and a car stereo. The case was cut using a CNC router he had access to at his school. The front panel is cut from a “Construction Ahead” road sign. The size of the case is based roughly on the rotting enclosures from which he pulled the speakers. He’s included connectors for external speakers as well as a USB charging port. The unit is powered by a gel battery and is recharged using an automotive battery charger.

A boom box lets you take the party anywhere. We like this one because of the pop art feel of the finished project.

Brain Control For The Arduino

October 20, 2009 by Mike Szczys 20 Comments

brain-controlled-arduino

When we hear about a brain controlled Arduino project we immediately think about a coding nightmare. As always, the simple hacks are the best hacks. [Joel] and [Akshay] used hardware from a kid’s game as a brain interface for an Arduino.

We came across the video (embedded after the break) of their work and asked for more info on what we thought was an incredibly difficult hack. It turns out they purchased Uncle Milton’s Force Trainer which uses a headset to measure brain waves and has a base unit that reacts to these measurements. Hacking into this device didn’t require reverse engineering of anything. They took the easy route, and tapped into the five LEDs on the base unit. As the game measures greater levels of concentration, it lights up more LEDs.

So far tapping into the game is just a proof of concept. It’s up to you to implement a brain controlled beer bot.

Continue reading “Brain Control For The Arduino” →