Monitoring The Engine Control Unit

January 28, 2011 by Mike Szczys 17 Comments

Is there a place in the dashboard of your high performance automobile for this Engine Control Unit feedback panel? There’s several methods of showing information at work here. The row of LEDs at the top of the bezel provide RPM feedback. The two red LEDs with chrome bezels are alarm indicators. But that big OLED display is the centerpiece of the unit. Not only can you scroll through a myriad of display options, but the screen packs more than enough contrast to be readable during the day. It looks like [Mathieu] is selling these units and has decided not to release source code because of this, but there’s a schematic available and a video after the break shows the menu system from which you can draw inspiration.

Continue reading “Monitoring The Engine Control Unit” →

Touch Screen Jukebox

January 28, 2011 by Caleb Kraft 5 Comments

We went “live” with our forums less than 24 hours ago and we already have our first project ready for the front page. [Elementix] has shown us his touch screen jukebox build. Using an assortment of car audio speakers and amplifiers hooked up to an old Pentium 4 PC with 120 Gigs of storage, he put together the base cabinet. The touchscreen is an ebay find and he built a custom enclosure for that part. For the interface, he started with “Jukebox Arcade”, a jukebox front end for mame cabinets but found he could easily manipulate the layout since it used an xml file for the settings. After some trial and error, and a little work with the gimp, he got it looking the way he wanted. If you haven’t been there already, you should really check out our new forums.

555 Based Balancing Bot

January 27, 2011 by Caleb Kraft 25 Comments

This post on Reddit by [superangryguy] caught our attention today. He’s put together a video explaining the basics of how to build balancing robots, focusing on a 555 timer based one. He’s got two main versions, the 555 based one and another that is based off of two transistors. He says the 555 based one is much easier to build. This has all come about due to the upcoming 555 timer contest. if you go to the Reddit post you can get schematics for both versions as well as a sneak peak at what he plans on building for the contest. You can see the video after the break.

Continue reading “555 Based Balancing Bot” →

2600 Magazine Runs A Sale For The 20th Century Back Issues

January 27, 2011 by Caleb Kraft 19 Comments

In an effort to clear out some warehouse space, 2600 magazine has dropped the price for issues from 1984 to 2000 down to $2.50 each. If you haven’t read 2600, the Hacker Quarterly, shame on you. Pick some up and get reading. They are a resource beyond any other magazine out there for hacking and security related issues. They don’t gloss over the good bits either, they give detail because they know what they are talking about. Just to further prove that point, we present to you, the image above. Yes that is a schematic of a bluebox on a child and yes, you can buy it in their store(the shirt).

Xbee Controlled, Granite-wrapped Clock Travels Into Future

January 27, 2011 by Mike Szczys 59 Comments

From the looks of it this clock is a couple of months ahead of its time. [Oscar] built the clock (translated) taking time to add a lot of goodies into the mix. First up, the parts you see include six large 7-segment displays for hours, minutes, and seconds as well as an LED marquee which can scroll messages. Inside there’s a temperature and humidity sensor for environmental feedback, and an Xbee module which allows for wireless computer control. Time is kept by a DS1307 real-time clock, which is read by an Arduino Uno, then pushed to the display by the pair of I2C addressable SAA1064 drivers. The whole thing was enclosed in four sheets of granite for the box, and a pane of glass for the front. We sure hope it’s well anchored to that wall. You can see it ticking away after the break.

Continue reading “Xbee Controlled, Granite-wrapped Clock Travels Into Future” →

5/8″ Ball Bearing Playground

January 27, 2011 by Mike Szczys 12 Comments

This kinetic sculpture is a ball bearing’s paradise. Not only do they get a cushy ride around two lift wheels but there’s a variety of enjoyable obstacles they can go down. The first is a vortex made from a wooden flower pot which sends the balls randomly down one of two possible exits. From there it’s on to enjoy a ride on a flip-flop, a divide-by-three (takes weight of three marbles before it dumps them all), a zig-zag track, or a divide by twelve mechanism. We’re sure this is a riveting read, but don’t miss the video after the break where [Ronald Walter] shows it in action and takes it apart to illustrate the various features.

If you’re wondering about the digital logic terms used, we’ve seen wooden devices that use these concepts in the past.

Continue reading “5/8″ Ball Bearing Playground” →

Mitch Altman Hosts A Tour Of Noisebridge

January 27, 2011 by Mike Szczys 17 Comments

[Mitch Altman] just popped up once again (seriously, this guy is everywhere!) in a video tour of Noisebridge, and hackerspace he co-founded in San Fransisco. The space is 5200 square feet and they’ve managed to cram a lot of different uses into it. There’s areas for computers and electronics, crafting and sewing, a dark room , a machine shop, a full kitchen, as well as classrooms and other gathering places.

He talks about what a hackerspace is and what goes on in San Fran before going off on a little tour of the hackerspace movement. His recollection pins the Chaos Communications Camp as the impetus behind an initial push for these community spaces popping up in the US. It’s a fun five-minutes to watch so check it out.

[via Boing Boing]