Animated Turn Signals Add A Little Bit Of Cylon To Your Automobile

October 3, 2011 by Mike Szczys 71 Comments

[StarfireMX] churned out a fantastic turn signal replacement for his Mustang. When he switches on his blinker, a chasing pattern of amber LEDs is shown on the front corner of his car. Pretty cool, and as far as we can tell this is still street legal. But once he gets onto private property [StarfireMX] can have a little bit more fun with the replacements. The LEDs are actually fully addressable RGB modules. They can display a variety of colors and patterns, with wireless control from a touch-screen unit he also built.

Both the turn signal unit, and the remote controls are Arduino driven with XBee modules for wireless communications. Pop the hood and you’ll find even more blinky lights to accent the engine, which are also tweaked using the remote control.

Don’t miss the demonstration video after the break. Near the end of the clip you can see how the controller is mounted with heavy-duty Velcro behind the grill. Inside the project box there’s a voltage regulator which drops the 12V down to 5V and can put out a whopping four amps to make sure the LEDs have plenty of current.

Continue reading “Animated Turn Signals Add A Little Bit Of Cylon To Your Automobile” →

Resurrecting An XT

October 3, 2011 by Brian Benchoff 28 Comments

The best laid plans of mice and men oft go awry. At least that’s what we’d tell ourselves if we couldn’t find a 30-year-old computer monitor. [Andrew] picked up an old IBM XT on eBay recently and tried to get the video working. He hasn’t seen any success yet, but the way he goes about solving this problem is very clever.

[Andrew] was stuck with a cool old computer with no way to output anything onto a screen. The XT had an MDA port but neither his TV nor his VGA monitor would accept MDA frequencies. As a workaround, [Andrew] connected an Arduino to the XT keyboard port. On the factory floor, IBM workers used the XT keyboard to load code onto the machines while POSTing. He was able to change the frequency of the MDA CRT controller to CGA frequencies, and with the help of some small components got some video working.

The Hsync and Vsync are still off, and [Andrew] hasn’t been able to get the machine to finish POSTing, but he figures he can use the XT keyboard port for bidirectional communication. He’s written a very small kernel to test out a few things, but unfortunately the XT’s power supply died recently. Once [Andrew] replaces that, we’re sure he’ll get his box up and running.

Freakyphone Has A Puzzle For You!

October 3, 2011 by Mike Nathan 6 Comments

freakyphone

[Mime] likes to make puzzles and games for his friends to play, often using recycled electronics to construct them. He had been contemplating a sound-based game for some time when he came across an old rotary phone at a garage sale that would be perfect for what he had in mind.

He calls his creation the Freakyphone, and the goal of the game is to guess the name of a historical figure via a series of audible clues. The phone was constructed using an Arduino that plays audio using a sound shield from Adafruit. While he was ultimately unable to get the phone’s ringer to work properly, [Mime] says that the build process was relatively easy overall.

When activated, the phone buzzes for attention, prompting the player to pick up the handset. After introducing the game, the phone will ring additional times with random sound clips to clue the player into the historical figure’s name. If the player correctly enters the person’s name using the rotary dial, they receive a “winning tone” and the game is over.

It’s always nice to see someone building gadgets for their friends just for the sake of fun – nice work!

Continue reading to see a video showing how the Freakyphone was built along with a demo of the game.

Continue reading “Freakyphone Has A Puzzle For You!” →

Sustainability Hacks: Bio-diesel Motorcycle Speed Record

October 3, 2011 by Brian Benchoff 30 Comments

Sometimes you don’t need a lot of horsepower to win a speed record. In a fluke of no one else competing in the alt fuel class, [John]’s biodiesel motorcycle set a new land speed record at the LTA event last summer.

[John]’s bike is a junkyard 1978 Kawasaki KZ400. The stock engine was replaced with a Chinese knock off of a Yanmar air-cooled diesel motor. The fuel is regular old vegetable oil. From the looks of the exhaust, we’re assuming [John]’s garage has a rich french fry smell to it.

Compared to highway speeds, [John]’s runs for a land speed record are a little absurd – a nice bonus when you’re the only driver in your class. The first pass of 42 mph was a little disappointing, so [John] removed the fender, tail light and brakes. After all the unnecessary weight was removed, the top speed – and new record – was 56.5 mph.

Converting a diesel car to run on french fry oil is great and a lot better for the environment than burning liquefied dinosaurs. In any event, a green motorcycle is a lot better than 2000 pounds of automobile moving less than 200 pounds of person. Check out a few of [John]’s land speed runs after the break.

Continue reading “Sustainability Hacks: Bio-diesel Motorcycle Speed Record” →

How To Build Your Own Cat Door

October 2, 2011 by Mike Szczys 29 Comments

[Dino] continues his to satisfy his weekly hacking goal by building a cat door for his pets. He has a Habitat For Humanity resale store nearby that was doing a 50% off sale on doors. So he picked up a six-panel door and set to work.

The first step is drawing out the opening and cutting it with a jigsaw. Once he was done, there’s some reinforcement work to be done because this is a hollow-core door. Since he had already cut a bit of the bottom off of the door to fit his jamb opening, he had some wood stock that was already the right thickness. That bit was secured to the top and bottom of the opening with glue and some brads. The same was done on the sides with a different piece of scrap, then the door was hung in the opening to reach the point in the project seen above.

Here [Dino] prepares to add a flap to cover the opening. He used acrylic for the flap because it’s light-weight and clear. A piece of piano hinge makes it easy to swing in both directions. The final touch is a magnet which keeps the flap from swinging in the breeze using parts from a magnetic cabinet latch. No sooner does he have the flap in place than a brave kitty gives it a test run.

Hopefully he doesn’t have the kind of pests that caused other hackers to build facial recognition cat door locks.

Continue reading “How To Build Your Own Cat Door” →

Robotic Arm Follows The Movements Of Your Own Limbs

October 2, 2011 by Mike Szczys 3 Comments

[Alejandro] and his friends recently finished a first prototype of scratch-built robotic arm. They’ve got some nice electronics bench equipment for use with a project like this, but for the actual fabrication work it’s off to the kitchen.

As you can see in the video after the break, they’re using PVC as the stock material in this build. Flat sheets are produced by slitting a PVC pipe down the middle, warming it in oven until soft, then compressing it between two floor tiles with a big jug of water used as a weight for the makeshift press. Mounting holes for the servo motors that make up the joints are drilled with a hand drill, and the assembly was affixed to an old CD as a base.

Once assembled they wired it to the control circuitry and build a set of sensors that you wear on your arm. Now your elbow, wrist, and pointer finger are in control of the servos. A demonstration of this functionality starts around two minutes into the video.

We’ve seen other examples of robot arms built without the use of machine tools. This arm made out of ShapeLock plastic is one of the most interesting examples.

Continue reading “Robotic Arm Follows The Movements Of Your Own Limbs” →

[Clement] Sees The Cargo Bike And Raises A Bicycle Cargo Trailer

October 2, 2011 by Mike Szczys 16 Comments

[Clement] and his friends were going on a long bike tour and needed a way to carry their gear along with them. They set to work and managed to build this cargo trailer from mostly reused materials.

The only part of this trailer that is reused junk is the connection mechanism that lets you attach it to just about any bike. That was made (presumably in a machine shop) to act as a removable pipe clamp, making it pretty quick to swap between different bikes. It has a universal joint welded to it so that the angle of the seat post won’t affect how the trailer rides.

A goose neck keeps the trailer far enough back to avoid getting in the way of the rear wheel. The mesh basket was made from parts of an old industrial machine. The rear wheel is attached with a swing-arm that has what looks like a rubber bumper to act as a shock absorber. But if you want to make sure a big bump doesn’t send your luggage flying, [Clement] included a picture at the bottom of his post showing a much nicer spring shock on a different bike trailer.

If you’re confused by the title of this post you must have missed the cargo bike that was recently featured.