The Traveling Terabyte Project – Helping Those Who Protect Us

March 11, 2011 by Mike Nathan 75 Comments

ttb_dogtags

Though some people differ on what exactly a “hacker” is, there is one thing that can be said for certain – this global community of tinkerers, experimenters, and hobbyists we belong to is one of big hearts. Through our various projects and tutorials, we lead by example – sharing knowledge and offering help whenever we can. You would be hard pressed to find something that could exemplify this more than the Traveling Terabyte Project.

Started in the summer of 2006 by [Deviant Ollam], the goal of the project was to provide informational content from DefCon 14 to those friends and acquaintances who were deployed overseas in the service of the U.S. Armed Forces and their associates. This was originally done by outfitting durable cases with large portable hard drives stuffed with movies, music, and publications in order help those stationed far from their friends and family enjoy their down time a little bit more.

The project has grown by leaps and bounds while the storage mediums have shrunk accordingly. The project has recently entered a new phase, where they are migrating over to flash drives instead of hard drives, which should help spread the distribution of media immensely.

The Traveling Terabyte Project did not approach us soliciting money or publicity in any way, so by no means should you feel obligated to support the project. Regardless of our individual political leanings and views on war, we believe that helping out people who are subject to extreme amounts of stress while stationed far away from their home, friends, and family is a noble cause.

[Thanks, RenderMan]

DIY Flower Bouquet Guaranteed To Get You Dumped On Valentine’s Day

March 10, 2011 by Mike Nathan 36 Comments

led_flower_bunch

[Erik] is a broke engineer.

When this past Valentine’s day rolled around he didn’t have any cash to buy a gift for his girlfriend, so he had to get creative. Every girl likes flowers, but unless he was going to give his lady some day old daises from the grocery dumpster, he would have to make them himself.

He started by bundling together and bending some T-shirt hangers into stems. He then wrapped them in the green & green/white wire pairs from some Cat-5 cable to give them some color. An old keyboard was sacrificed to create the flower petals and leaves, which were presumably colored with markers before being glued to the end of the hangers. He added a reed switch to the flower pot, which illuminates the LEDs he installed under the petals when a magnet-bearing cardboard placard reading “Love Erik” was placed near it.

How did his girlfriend like them? Well, let’s just say she’s no longer in the picture. He didn’t tell us if the bouquet was the reason, only that she’s gone. (though we happen to think it’s pretty cool).

Keep reading to see a quick video demonstration of the light-up bouquet.

Continue reading “DIY Flower Bouquet Guaranteed To Get You Dumped On Valentine’s Day” →

Kinect Hacked To Work With Garry’s Mod Means Endless Hours Of Virtual Fun

March 10, 2011 by Mike Nathan 37 Comments

garrys_mod_kinect

[John B] is a software engineer and had some spare time on his hands, so he started messing around with his Kinect which had been sitting unused for awhile. He wanted to see what he could create if he was able to get Kinect data into a virtual environment that supported real-world physics. The first idea that popped into his head was to interface the Kinect with Garry’s Mod.

If you are not familiar with Garry’s Mod, it is a sandbox environment built on top of Valve’s Source engine. The environment supports real-world physics, but beyond that, it pretty much lets you do or build anything you want. [John] found that there was no good way to get Kinect data into the software, so he built his own.

He used OpenNI to gather skeletal coordinate data from Kinect, which was then passed to some custom code that packages those coordinates inside UDP packets. Those packets are then sent to a custom Lua script that is interpreted by Garry’s Mod.

The result is just plain awesome as you can see in the video below. Instead of simply playing some random game with the Kinect, you get to design the entire experience from the ground up. The project is still in its infancy, but it’s pretty certain that we’ll see some cool stuff in short order. All of the code is available on github, so give it a shot and share your videos with us.

Continue reading “Kinect Hacked To Work With Garry’s Mod Means Endless Hours Of Virtual Fun” →

Rigol Oscilloscope Teardown And Repair

March 10, 2011 by Mike Nathan 10 Comments

[Hotsolder] encountered a bad encoder in his Rigol Oscilloscope, so he opened it up in order to replace the damaged part. According to him, it was quite an adventure, so he documented the disassembly and component swap for the benefit of anyone else out there that might have to do the same.

The teardown is in the form of a slideshow, which is available on his site. The images are all pretty well annotated, so you should be able to follow along quite easily if you happen to be tearing one apart yourself. There’s not a ton of exotic things to see inside the scope, it pretty much contains what you would expect to see if you cracked one open.

The encoder replacement went off without a hitch, and he even took pictures of the defective one to discuss how it works.

It’s definitely a quick and interesting read if you are simply curious about oscilloscopes, or if you happen to need to dismantle yours.

[Thanks, oakkar7]

Domo Kun Robot Achieves Balance Sans Gyroscope

March 10, 2011 by Mike Nathan 14 Comments

Every time it tips over, the FSM kills a kitten

Most self-balancing robots use some sort of circuitry like gyroscopes or accelerometers to keep them upright. Some bots however, can achieve nearly the same effect by far less complicated means.

Meet the Domo Kun wobbly bot, created by [Chein]. The robot is essentially a pendulum, where the pivot point is even with the wheel axle. The base of the robot is loaded with batteries, motors, and weights, all of which keep the robot relatively steady while zooming about the room. A light balsa wood frame was fitted to the top of the metal chassis, and a thin cardboard Domo Kun shell was mounted on top of that. The robot is driven using the remote control circuitry that he stripped from a toy car. He also mentions that the positioning of the batteries and weights is key to getting the robot to balance and roll properly – something that took several attempts to get just right.

Now if he could only program it to autonomously chase kittens…

Be sure to check out the pair of videos we have below of the robot chassis in testing as well as the final product.

[via HackedGadgets]

Continue reading “Domo Kun Robot Achieves Balance Sans Gyroscope” →

Sound-sensitive Android Figure Speaks In Morse Code

March 10, 2011 by Mike Nathan 16 Comments

mechanized_android_figure

Instructables user [tanbata] recently got his hands on a Google Anroid figurine and thought that while it looked great, it served no real purpose. He decided to change that, and converted this once-useless hunk of plastic into a miniature robot that moves and responds to sound.

He pried of the head of the figure and got busy fitting a servo into the Android’s body to enable head movement. An ATiny was added to control the figure, along with a microphone to enable it to respond to sound. A piezo was inserted to relay Morse code messages, and a handful of LEDs were installed in the body cavity and eyes of the figure just for kicks.

When the bot is powered on and senses a loud enough sound, the eyes light, the head spins from side to side, and the robot spouts off a random message in Morse code as you can see in the video below.

It’s not the most advanced project out there, but with a few tweaks, it could make for a great USB-powered email or IM notification system for your PC. Better yet, it’s a great project to do with a child who is interested in electronics, since they get to make a cool robot toy they can keep.

Continue reading “Sound-sensitive Android Figure Speaks In Morse Code” →

Hackerspace Camera Rig Auto-alerts The Internets When Projects Are Finished

March 10, 2011 by Mike Nathan 5 Comments

alerttheinternets_cam

It seems like every hackerspace has their own means of communicating status messages to their members. The hackers at [MetaLab] in Vienna have put together a rather novel way (Google translation) of letting the world know they have completed a project. While some hackerspaces simply notify their members that they are open for business, this hack takes things a step further.

When a project is deemed complete, the camera is removed from the dock, and any number of videos can be recorded. When the camera is returned to the dock, a canned introduction video is added to the recordings, then everything is automatically uploaded to YouTube. No extra time is required, no video editing needs to be done – their work hits the Internet immediately once they have finished filming it.

It’s a great idea, and something that every hackerspace should have. It would be even better to see these things installed in public areas to allow for immediate reporting of events as they occur.

If you are so inclined, be sure to check out [MetaLab’s] YouTube channel.

[via Make]