[Squirrelfantasy] built a printer using LEGO pieces. It’s not a Mindstorm project but instead depends on some type of development board and some auxiliary components on a protoboard. We couldn’t get a good enough look to tell exactly what makes up the electronics so start the debate in the comments. We feel this is a printer and not a plotter because the stylus moves on just one plane while the paper feeds past it but that’s open for debate as well.
The image to the left is a robotic tank powered by the popular Lego Mindstorms NXT kit. The brains rest inside of a tube, including the controller brick, ultrasonic range finder, a gyroscope, and a compass. Two sets of treads surround each edge of the tube making us wonder which end is up? We’ve embedded a video of this beast after the break. You’ll see that the tank is incredibly agile in this configuration.
To the right is an aquarium heater. [Dave’s] kid were growing some tiny water dwellers which we’ve always know as Sea-Monkeys. The problem is that the tank needs to be between 72-80 degrees Fahrenheit for the little shrimp to thrive. He dug out his NXT controller and paired it up with the Lego temperature sensor and a dSwitch relay. This setup monitors the Aquarium for temperatures between 72-78 degrees and switches a lamp on an off to regulate the temperature. This keeps his kids and the stagnant pool happy.
This interesting use of Lego popped up on the mailing list of the University of Bergen. Build by a group of Norwegian Danish students, it’s a simple computer that implements Alan Turing’s design from 1937. Having both read and write functions, it implements its own (somewhat inefficient) medium of non-volatile memory. What we find interesting is that rather than move the ‘tape’ through the machine, the machine rolls over the tape. Thanks to [Thorsten] for the tip.
When [Epokh] sent in this Wii controlled segway style bot, we remembered a post a few months ago where someone made a balancing bot, but hadn’t completed the Wii code. Well, [Epokh] is going to show you how to implement the Wii controls with the Lego NXT system. He’s found the links to all the software you need and broken down the configuration step by step. He’s beenbusy lately, let’s hope he keeps it up.
[btopley] built his own micro mill out of Lego NXT parts. The construction details are a bit light, but it looks like a great way to try things out without all the actual machine work.
Yesterday LEGO announced that they had picked their 100 beta testers. They represent a broad cross section of blah, blah, blah. I’m not sure if I should be annoyed that I didn’t get picked or feel sorry for our buddy Jason Striegel who seems to be the only person that was officially denied. Oh well, time to go spend this extra $150 on Mega Bloks.
When the 6.5 HP (212 cc) Harbor Freight Predator engine in his kid’s go-kart gave up the ghost after some particularly hard driving, [HowToLou] figured it would be a good time to poke around inside the low-cost powerplant for our viewing pleasure. As a bonus, he even got it up and running again.
The shattered rod, and its replacement.
For an engine that has a retail price of just $160 USD, we’ve got to admit, the inside of the Predator doesn’t look too shabby. Admittedly, [HowToLou] determined that the cause of the failure was a blown connecting rod, but he also mentions that somebody had previously removed the engine’s governor, allowing it to rev up far beyond the nominal maximum of 3,600 RPM. No word on who snuck in there and yanked the governor out, but we’re betting it wasn’t the 7-year old driver…
Replacing the connecting rod meant taking most of the engine apart, but for our education, [HowToLou] decided to take it a bit further and remove everything from the engine. After stripping it down to the block, he re-installs each piece while explaining its function. If you’ve ever wanted to see what makes one of these little engines tick, or perhaps you’ve got a Predator 212 cc in need of a repair or rebuild, the presentation is a fantastic resource.
