Lego Technic Mechanical Seven Segment Display

August 7, 2014 by 12 Comments

TeemingColdDiplodocus

Here’s a rather mesmerizing piece of Lego genius, displayed as a .GIF for your enjoyment. It’s a 7-segment display that is completely mechanical!

Built by [aeh5040], this beauty features 7 separate linkages that control each display segment. It’s powered off of a single motor which rotates a cylinder covered in small protrusions, similar to how music boxes work. As the cylinder rotates, the protrusions knock the main drive gears back and forth, flipping each segment between the ON and OFF states through a series of axle joints and bevel gears.

It makes rather satisfying sounds too!

Continue reading “Lego Technic Mechanical Seven Segment Display” →

A Lego Game Controller; Just For The Hack Of It

July 30, 2014 by 2 Comments

ExwDPUV

[StrangeMeadowlark] decided one day to create this badass Arduino-based gaming controller. Not for any particular reason, other than, why the heck not?!

It looks like a tiny Lego spaceship that has flown in from a nearby planet, zooming directly into the hands of an eager Earthling gamer. With buttons of silver, this device can play Portal 1 and 2, Garry’s Mod, Minecraft, and VisualBoy Advance. Although more work is still needed, the controller does the job; especially when playing Pokemon. It feels like a Gameboy interface, with a customizable outer frame.

Sticky, blue-tack holds a few wires in place. And, most of the materials are items that were found around the house. Like the gamepad buttons on top; they are ordinary tactile switches that can be extracted from simple electronics. And the Legos, which provide an easy way to build out the body console, rather than having to track down a 3D printer and learning AutoCAD.

Continue reading “A Lego Game Controller; Just For The Hack Of It” →

Self-Balancing Robot Uses Android And Lego NXT

July 16, 2014 by 21 Comments

LEGO NXT + Android = Self Balancing Robot

Self-balancing robots are pretty cool, but sometimes a bit too complex to make. [HippoDevices] shows us that it’s really not that hard, and you can even do it with Lego NXT and an Android device!

First step is to build your two-wheeled robot – go nuts! As long as the Lego NXT motors are strong enough you’ll be able to make most different shaped robots easy to balance. You’re going to need an Android ADK board to provide communication between the Lego motors and your Android device. [HippoDevices] is using their own design, called the Hippo-ADK which is on Kickstarter currently.

This allows your Android device to read the status and control the Lego Motors — from there it’s just a matter of programming it to balance according to the device’s gyroscope.

Continue reading “Self-Balancing Robot Uses Android And Lego NXT” →

Lego Drawing Machine Draws Block Shapes Best

July 13, 2014 by 7 Comments

Lego-drawing machine

Loving to draw but deathly afraid of pen ink, [Marcel] came up with a little drawing machine made out of Lego that will do it for him. It’s not a very complicated build but it does have several different components arranged such to complete a task, and that in itself is cool. Oh yeah, just kidding about the “afraid of pen ink” thing.

RC Car Servos are used to drive the pen in the X and Y directions. These servos only have a 180 degree range of motion which is not enough to move the pen very far. To increase the pen’s travel distance, [Marcel] attached a large gear to the servo which rotates a much smaller gear that rides on a rack gear attached to the bed. A Lego hinge takes the place of a Z axis and is used to set the height of the pen that is strapped to the machine via rubber band.

In order to make the machine draw, the user moves an analog joystick. The changing resistance values of the joystick’s potentiometers are measured by an Arduino. The Arduino then moves each servo to the appropriate position using PWM. If you’d like to know how to do this, check out the Knob Tutorial.

If you’re not ready to l’eggo your Lego drawing machines, check out this super complicated creation or this arm emulator that draws the Mona Lisa.

 

Turning Lego Into A Groove Machine

May 20, 2014 by 10 Comments

lego

Last weekend wasn’t just about Maker Faire; in Stockholm there was another DIY festival celebrating the protocols that make electronic music possible. It’s MIDI Hack 2014, and [Kristian], [Michael], [Bram], and [Tobias] put together something really cool: a Lego sequencer

The system is set up on a translucent Lego base plate, suspended above a webcam that feeds into some OpenCV and Python goodness. From there, data is sent to Native Instruments Maschine. There’s a step sequencer using normal Lego bricks, a fader controlling beat delay, and a rotary encoder for reverb.

Despite being limited to studs and pegs, the short demo in the video below actually sounds good, with a lot of precision found in the faders and block-based rotary encoder. [Kristian] will be putting up the code and a few more details shortly. Hopefully there will be enough information to use different colored blocks in the step sequencer part of the build for different notes.

Continue reading “Turning Lego Into A Groove Machine” →

Lego Robot Plays Games For You As You Sleep

April 17, 2014 by 19 Comments

robot

[Uli Kilian] — best known for solving 100 Rubik’s cubes during the 2011 London Marathon — got addicted to a free iPad game called Jurassic Park builder. Being the efficient man he is, he soon realized the game could be automated — after all, you just have to tap on dinosaurs every few minutes to earn in-game currency…

He’s using a Lego Technic set with an old iPad, and an Arduino connected to a Windows laptop. Wheels roll the iPad back and forth as the robot plays the game. The “finger” of the robot is wrapped in tin-foil and connected to a ground pin to simulate a human finger for the iPad. The article doesn’t explain how it works, but by looking at the robot it appears to just randomly tap away back and forth across the screen — which we guess works for this game?

He hasn’t played with Lego since he was 8, and only just learned about the Arduino a few weeks prior to building this. As a 3D artist he was intrigued to do something in the real-world — nice!

[Thanks Aurelio and William!]

LEGO® My Single-Phase Induction Motor

March 30, 2014 by 5 Comments

[Diato556] made a really cool single-phase induction motor with parts mounted on Duplo blocks. He has posted an Instructable where he uses these modular parts to  demonstrate the motor and the principles of induction as described after the jump.

 

Continue reading “LEGO® My Single-Phase Induction Motor” →