LEGO Pick And Place

May 31, 2010 by Mike Szczys 8 Comments

[youtube=http://www.youtube.com/watch?v=YoXCn4Gh_HA&w=470]

Turn your volume down and take a look at the brick sorting robot in the video above. It’s built using LEGO and powered by four different NXT modules. It sorts differently colored bricks on the intake conveyor and places them on three output conveyors. The build is solid and was [Chris Shepherd’s] impetus for starting a blog. We appreciate the pneumatic tricks that he detailed in some of his earlier posts such as a compressor, pressure switch, and air tank system. His advice is “build, build, build” and that’s what you’d have to do to perfect a monster of this size and scope.

LEGO Gearbox – Seven Speed Plus Reverse

April 8, 2010 by Mike Szczys 44 Comments

We know LEGO is a very versatile medium to build with but this is beyond what we considered possible. Seven speeds and a reverse gear were built into the gearbox for this LEGO vehicle. It’s not completely an original design, but adds to the five-speed design found in a ten-year-old LEGO set. See it demonstrated in the video after the break. The design uses a sequential gearbox; shifting is accomplished by clicking the stick up or down depending on how you want to shift. If you’ve got enough parts on hand you can build this using the assembly photos that [Sheepo] posted.

Can’t get enough of the gears? Check out this model of a double clutch transmission.

Continue reading “LEGO Gearbox – Seven Speed Plus Reverse” →

LEGO Automatons

March 26, 2010 by Mike Szczys 47 Comments

Here’s a collection of little LEGO oddities. Some of them exhibit a purpose, such as this interesting take on a line-following robot. Others, like the four seen above, are just automatons built to bring a smile to your face through their motion. There are dozens to choose from, with several pictures and a video of each. See the clips of these four after the break. Oh, and don’t worry, we didn’t find any LEGO iPhone docks, just cleaver mobile creations.

Continue reading “LEGO Automatons” →

LEGO Sequencer Builds Sound In 3D

March 9, 2010 by Mike Szczys 15 Comments

[Yoshi Akai] built a sequencer that is part steampunk, part injection molded plastic. The LEGO sequencer MR II has eight steps in a loop that is manipulated by adding the colorful blocks to a green base plate. Each color corresponds to one particular sound which can be modified by building skyward. On the other side of things he’s added a beautifully crafted control area for knobs and switches. We didn’t see much info about what is inside the device so, watch the clip after the break and then feel free to start the speculation in the comments.

This is a similar concept to the coin sequencer. From the picture above it seems the blocks have been altered and perhaps use light to identify the different blocks.

Continue reading “LEGO Sequencer Builds Sound In 3D” →

PicAxe LEGO Tank

February 10, 2010 by Mike Szczys 14 Comments

[TomTheGeek] built a LEGO tank with a PicAxe controller. Locomotion is supplied by a Lego Power Function motor controller. He cut an LPF extension wire in half so that he could patch into the PWM signals without altering the motors themselves. You can make out the control circuitry and a small breadboard in the tank’s turret. [Tom] added a laser pointer to the tip of the barrel but we’d like to see an IR LED. The tank is controlled by a infrared remote control and adding TV-b-gone functionality to the toy would create something of a Rube Goldberg feature for turning off the tube. But alas, there’s no programming space left for that as the PicAxe 08M is limited to 256 bytes.

There’s a video after the break of this little demon tracking its way around the room. This is a nice addition to the other LEGO tank we saw a while back.

Continue reading “PicAxe LEGO Tank” →

Lego Spider-bot

February 3, 2010 by Mike Szczys 11 Comments

[MkMan’s] LEGO spider robot combines pieces from a Mindstorm kit with a few milled plastic parts. The legs are a locomotive concept called a Klann Linkage. They operate in pairs and convert the rotational force from one motor into movement for two legs. Here, a total of four rotating gears moves eight legs, besting the hexapods we saw a couple of weeks ago in both leg count and motor economy.

Each limb is made up of five pieces plus one base for each pair. That makes eleven pieces per pair and a total of 44 for the entire robot. [MkMan] milled these parts out of 3/8″ HDPE stock. He’s made videos of forward motion and turning which we’ve embedded after the break. Even on a polished surface the bot looks fairly efficient at getting around.

Continue reading “Lego Spider-bot” →

LEGO Router Case Bests Factory Finish

January 13, 2010 by Mike Szczys 17 Comments

Stare at [Luke’s] LEGO router case; STARE AT IT! The router is nothing special, a WRT54GL that is fun to hack. We’ve seen it used as a robot, turned into a war driving box, and obviously this is where dd-wrt custom firmware started.

[Luke] designed the case in MLCAD and found a seller for the parts which came in just over $50. We think it’s much better looking than the stock case an if you used that for a different project, this is a way to replace it. We’ve embedded [Luke’s] assembly video after the break. If you like this case, take a look at his LEGO PC case as well.

Continue reading “LEGO Router Case Bests Factory Finish” →