Hackaday Links: February 12, 2012

February 12, 2012 by 16 Comments

This is why digital picture frames were invented

[Petros] sent in this video of his visualization of Van Gogh’s Starry Night. He did this with openFrameworks and also made a version that reacts to sound. Is anyone else reminded of that one scene in Vincent and the Doctor?

A boat’s a boat, but a mystery box can be anything

[Rick] wanted to build a lock pick training station for the Eugene Maker Space, but he needed a way to make it interesting. What could be better than a mystery box? When you pick the deadbolt, open the box up and you’ll get a prize. Just make sure you put something of yours in the box for the next person.

3D printer prints its own case

Because the 3d printer community isn’t segmented enough, [Sublime] decided to design a new one. Here’s where it gets cool: the Tantillus can print its own case, and can ‘daisy chain’ to another Tantillus so only one set of electronics are needed. Interesting ideas afoot.

A diamond says I love you, but a duct tape rose says I’ll fix that for you

Valentine’s Day is coming up, so if you haven’t already made dinner reservations, you’re probably up the creek. How about making a duct tape rose for that special person in your life. Bonus: a dozen costs $3, and they won’t die in a week.

Using keypads over serial or SPI

[Leniwiec] sent in a tutorial on connecting keypads to a microcontroller with a serial or SPI interface. If you want to build a calculator, this is your chance. We’d use this for an Apollo Guidance Computer, though.

Tutorial: Build A Manifold Clock For $10

January 25, 2012 by 35 Comments

Every once in a while, the Hack a Day tip line gets a submission that is cool, but screams to be built in a few hours, possibly while consuming adult beverages. When [Shay] and [Ben] sent in their Manifold Clock Kickstarter, I knew what I had to do. To make a long story short, there’s a manifold clock hanging on my wall right now. Check out my manifold clock how-to guide after the break.

Continue reading “Tutorial: Build A Manifold Clock For $10” →

3D Printed Helicopter Blades

January 23, 2012 by 40 Comments

If you’re like us, you’ve been infatuated with the small RC helicopter you picked up on Amazon up until the point where it careened off a wall and broke its blades. Now that you’re wondering about what to do with that small pile of plastic, metal, and electronics, why not print some helicopter blades on your 3D printer?

[Taylor] printed these blades on his Utilimaker, but we don’t see why they couldn’t be printed on a Makerbot or other RepRap. The first set of printed blades worked on the top rotor, but they were too heavy when all four blades were replace. The parts were edited in netfabb using a 0.08mm layer height and now they’re working perfectly. As far as free tools go, Slic3r is the new hotness for .STL to Gcode conversion and now that [Taylor] put the files up on Thingiverse, anyone can print a set of spare blades.

Check out [Taylor] comparing his printed blades to the stock ones that came with his awesome heli after the break.

Continue reading “3D Printed Helicopter Blades” →

DIY Ultrasonic Plastic Welding

January 20, 2012 by 40 Comments

Here’s something that may be of interest to all the reprappers, vacuum formers, and other plastic fabbers out there: ultrasonic welding of plastics. If you’ve ever wanted to join two pieces of plastic without melting them together with acetone or screwing them together, [circuitguru] is your guy.

Ultrasonic welder setups are usually reserved for companies that don’t mind spending tens of thousands of dollars on a piece equipment. There are smaller versions made for heat staking – melting plastic pillars into rivets on the work piece – and [circuitguru] was lucky enough a somewhat reasonable price.

Because the heat staking gun was a handheld unit, a rotary tool drill press was put to work. The end result is a relatively inexpensive way to join two plastic parts without screws, glue, or solvents. The bond is pretty strong, too. Check out the video after the break to see [circuitguru] join two pieces of a plastic enclosure and try to tear them apart.

Continue reading “DIY Ultrasonic Plastic Welding” →

3D Printing Minecraft Worlds

January 6, 2012 by 10 Comments

If you’ve ever wanted to build an awesome tabletop game or model train layout scenery, you probably couldn’t do better than printing Minecraft worlds on a RepRap. This guide comes courtesy of [Nudel] who figured out how to use Mineways with his RepRap. While [Nudel]’s landscape print doesn’t have the full color of something from Shapeways, he only spent $3 in materials. Not bad if you’d like to print out your server’s world.

We have to give a shout out to [erich666] for his amazing work on Mineways. He bills his work as a bridge between Minecraft and a 3D printer or Blender. You can check out [erich]’s demo of Mineways after the break.

Of course the state of printing voxels wouldn’t be where it is today without the work of two guys at the MIT Media Lab and their work on Minecraft.Print(). If you manage to print out your base/castle/village, add it to the Mineways Flickr group.

Continue reading “3D Printing Minecraft Worlds” →

Welding And Casting ABS

December 16, 2011 by 31 Comments

Anybody who has a 3D printer always has a ton of useless plastic lying around. Some of that plastic may be from useless baubles, but most of it is in bad prints, short bits of filament, and general scraps. [Luke] found an interesting way to put those ABS scraps to use, and ended up turning trash into valuable plastic parts.

Commonly sold as nail polish remover, acetone will turn anything made out of ABS into a puddle of plastic. [Luke] makes glue using the same process – he fills a small container half full of acetone and half with small bits of ABS. After a day or so, he has a nice thin glue that dries into solid ABS. [Luke] used this to create a 400mm long piece of extruded t-slot. We don’t know if it would be suitable to build a child RepRap from, but it would sure be an interesting experiment.

[Luke] also did a little bit of casting with his ABS glue. With a thicker solution of ABS and Acetone, he managed to make this ‘thing’. The entire process is explained over at Thingiverse, We can’t wait to see what can be done with this stuff.

Chinese Hackerspaces, Or, What Happens When A Government Is Run By Engineers

November 27, 2011 by 89 Comments

Government leadership in Shanghai wants to build 100 community hackerspaces funded by the Chinese government. Each space will be at least 100 square meters, open 200 days a year, and come equipped with wood and metal lathes, saws, drills, grinders, mills, and more electronics than we can imagine.

The official government statement (translated here) says the Shanghai Science and Technology Network wants to build a few dozen ‘innovation houses,’ ostensibly to create a breeding ground for new, innovative ideas and to nurture young builders.

The first Chinese hackerspace, Xin Che Jian, opened last year and they’re doing some pretty cool stuff. A RepRap Mendel is already on the build roster (pictured above) along with a few quadrocopters and small racing robots.

As far as what this means for western countries, we’re going to editorialize a little bit and say that government-funded hackerspaces would increase innovation a little bit more than watching our representatives argue about homosexuals or taxes. Who knows, if this Chinese experiment proves successful, it may move out of Asia and onto the Americas and Europe.

via reddit