The Spud Gun To End All Spud Guns

March 13, 2012 by Brian Benchoff 75 Comments

In Norse mythology, Mjöllnir is the hammer of Thor, forged in a contest to create the most wondrous and munificent tool for the gods of Asgard. While we’re not aware if [MrCrowley] recently made a bet with Loki, his version of Mjöllnir, a gigantic spud gun powered by MAPP gas, is wondrous enough for our tastes.

Unlike most of the other spud guns we’ve seen, [MrCrowley] eschewed the use of PVC pipe and fittings in his build because that would explode on the first test fire. Instead, the gun uses galvanized and stainless steel for the majority of the construction. That’s not to say this spud gun is necessarily safe, though: as he demonstrates in the video after the break, golf balls exit the barrel with a comparable energy to most rifle rounds.

For an interesting take on an ignition system, [MrCrowley] built a remote ignition system out of a wireless doorbell and a 100kV stun gun. While this does allow for remote firing, the entire build seems safe enough – from behind the muzzle, at least – to be carried with a rifle strap.

It should go without saying that this is incredibly dangerous and you shouldn’t build this if you’re not planning on your last words being, “Wanna see something cool? Hold my beer.” That being said, [MrCrowley] knows what he’s doing, and you can check out the video of Mjöllnir in action after the break.

Continue reading “The Spud Gun To End All Spud Guns” →

Portal Mini Golf Hole Will Incinerate Your Ball…you Monster

March 12, 2012 by Mike Nathan 38 Comments

portal-golf-hole

One of [Tom’s] friends is celebrating a birthday soon, and he was asked to make a mini golf hole for the event. While most people would expect to bring beer or guac to the shindig, he saw this as an opportunity to bring a little bit of Portal to life.

Near the end of the first Portal game, you are forced to pitch your companion cube into the incinerator, a scene which [Tom] thought would be the perfect mini golf hole. He started out by building an iris door mechanism, which he surrounded with chicken wire and some plaster, producing a fantastic-looking waste disposal pipe.

He added a ramp that leads up to the hole, then [Tom] got busy with the electronics portion of the fixture. Once the portal button at the end of the ramp is pressed, an Arduno triggers a pair of motors to open the waste disposal door and fire up a smoke machine. The result, as you can see in the video below, is nothing short of awesome.

[Tom] says he’s in the process of building a pair of turrets and a working golf ball portal as well, so if you’re a big Portal fan, be sure to check out his site for updates.

Continue reading “Portal Mini Golf Hole Will Incinerate Your Ball…you Monster” →

Testing An Open Source PID Controller With Steak

March 12, 2012 by Brian Benchoff 20 Comments

Sous vide cookers aren’t anything new, but [Phil] wanted to build the first sous vide using the osPID, an open source PID controller just released in the last month.

The build uses the osPID Open Source PID controller we saw last week that comes with inputs for a thermocouple and pair of relays capable of switching a hot plate or immersion heater. The osPID is based on the Arduino and was created by [Brett Beauregard], author of the Arduino PID library.

Getting to the meat and potatoes of the build, [Phil] connected a 300 Watt immersion heater to the osPID and put the heater in a bowl of water. A delicious looking cut of beef tenderloin was shoved into a ziplock bag and suspended in the bowl of warm water for a few hours. With the heater and thermocouple attached to the osPID, the temperature was set at 130° F and the entire device was left alone for a few hours. Looking at [Phil]’s recipe for tenderloin with lemon parsley butter whets our taste buds, so we’ll hope [Phil]’s dinner came out just fine.

EcDB Offers A Simple, Intuitive Way To Keep Your Electronic Inventory Organized

March 12, 2012 by Mike Nathan 59 Comments

ecdb

One of the most important tools for any hacker or maker is organization. You might consider it more of a concept rather than a physical tool, but regardless of how you like to frame it, ensuring your tools and components are (nearly) always where they should be is key. As the odds and ends add up, it can sometimes be hard remembering exactly what you have on hand – that’s where the ecDB comes in handy.

Short for electronics component DataBase, the ecDB was created by [Nils Fredriksson], and offers a clean and intuitive way to keep tabs on what you have in-house. Many of us have used spreadsheets and notebooks to do the same, but ecDB allows you to record much more data than you could with either solution.

This is immediately clear within a moment or two of looking at the site’s interface. Not simply limited to listing part names and quantities, ecDB allows you to record manufacturer info, package type, and pin counts, while also allowing you to attach PDF datasheets and images of your components as well.

We really like system that [Nils] put together, and suggest giving it a spin to see if it will help you keep things organized in your workshop.

Becoming The YouTube Loading Animation

March 12, 2012 by Brian Benchoff 75 Comments

Whether you’re used to dropped wifi connections, or your housemates are using up all the bandwidth for streaming, we’ve all see the spinning octet of disks that is the YouTube loading animation. [technocrat] thought it would be a great idea to actually become YouTube and set out on designing a physical manifestation of the loading animation.

[technocrat] used eight ping-pong balls as the main structure of the build. After drilling each ping-pong ball and gluing white LEDs in, the only thing left was to connect everything up to an Arduino. The code loops through each LED and provides the ‘light trail’ animation YouTube has burned into our memory.

To complete the build, [technocrat] attached his physical loading animation to a black t-shirt emblazoned with the YouTube logo to make everything more understandable. While it may not be as colorful as the beachball of death or as conceptual as the Windows ‘spinning hourglass’, we’re really liking this build. Check out the video after the break.

Continue reading “Becoming The YouTube Loading Animation” →

GeneBoy Is The Portable Sega Genesis You’ve Always Wanted

March 11, 2012 by Mike Nathan 31 Comments

There’s something about portable gaming systems that just doesn’t get old. Perhaps its the nostalgia, or the unique cases and form factors the modders come up with. Whatever it might be, we think they’re great.

[Downing] wrote in to share a portable system he just wrapped up, called the GeneBoy. He broke down a Sega Genesis console to the bare necessities, then attached a 3.5” backup camera screen to serve as the display. A 3rd party Genesis controller donated its buttons to the GeneBoy, while his D-Pad was salvaged from an original Playstation controller.

The case was built from vacuum formed plastic, which made it easy to get just the size and shape he needed to hold everything together perfectly. Even though he says that the outside of the case got a bit roughed up during final assembly, we think it looks great. I would certainly enjoy having all the fun of [Sonic the Hedgehog] or Road Rash in the palm of my hand any day!

Continue reading to see the GeneBoy in action, and be sure to check out [Downing’s] blog along with the Modded by Bacteria forum thread where he discusses the finer details of its assembly.

Continue reading “GeneBoy Is The Portable Sega Genesis You’ve Always Wanted” →

Over Engineering Windshield Wipers To Sync To Music

March 10, 2012 by Brian Benchoff 43 Comments

In the late 90s, Volkswagen aired a series of awesome television advertisements that won a few awards relevant to those in advertising circles. One of these ads was titled Synchronicity and showed a VW Jetta’s windshield wipers (among other things) syncing to music as the car drove down a rainy alley. [ch00f] thought beat tracking wipers would make for a great project, and we love the sheer amount of engineering that went into this build.

The build began with [ch00f] taking apart his wiper motor to get some specifics for his build. Ideally, a rotary encoder would be very useful for this project, but designing a durable encoder would be a pain anyway. [ch00f] had to settle with the ‘parking pins’ on the wiper gear motor that allow the wipers to be driven in intermittent mode.

[ch00f] spent a great deal of time writing code that would guarantee a constant wiper speed, but that didn’t solve the problem of phase, or having the wipers begin or end their cycle on the beat. This problem was somewhat solved (as you can see in the video after the break) by using a feed forward system – basically, the software would predict the change in phase needed and correct it by changing the speed.

The build still isn’t perfect, although that’s mainly due to the placement of wiper parking switch on the wiper motor. [ch00f] plans on spending a little more time correcting the wiper speed/phase control with software, but what he’s got now is still very impressive.

Continue reading “Over Engineering Windshield Wipers To Sync To Music” →