Start Your Engines: The FPV Contest Begins Now!

November 22, 2022 by Elliot Williams 15 Comments

There are places that you can go in person, but for everything else, there’s FPV. Whether you’re flying race quads, diving the depths in a yellow submarine, or simply roving the surface of the land, we want to see your builds. If it’s remote controlled, and you feel like you’re in the pilot’s seat, it’s FPV.

When you say “first person view” many of you will instinctively follow up with “flight” or “drone”. But given the ease of adding a camera and remote control to almost any vehicle, there’s no reason to only fly the FPV skies. (Of course, we want to see your crazy quadcopter builds too.)

We went looking for a few less-traditional examples to whet your appetite, and we found a lot. There are super-cute FPV bots for indoors and more robust tanks for cruising around the neighborhood. In the summer, you’ll probably need an FPV lawnmower, and for the winter, naturally, an FPV snowblower or a budget-friendly FPV snow-boat. Or skip the outdoors entirely and terrorize the pool with an FPV sub.

This contest isn’t exclusively about the vehicles either. If you’re working on the tech that makes FPV possible, we want you to enter. For instance, this simple quad/drone tracker will help keep your video feed running and your mind on flying. This cockpit will make the immersion more complete. And nobody likes the jello-cam effect that excess vibration can cause, so we’d like to see camera hacks as well.

And of course, your quads. Is your FPV quad too fast, too light, or does it fly too far? Show us. The contest starts now and runs until Jan 3, 2023, and there are three $150 shopping sprees courtesy of Digi-Key on the line. Get hacking!

2022 Cyberdeck Contest: Prototype Cyberdeck Is Anything But Questionable

October 26, 2022 by Jenny List 5 Comments

We see many projects here at Hackaday, about which their creators are unreasonably modest. We like a good cyberdeck, and we think [betaraybiff] is one of those creators from their project description for a Prototype Cyberdeck of Questionable Practical Use. It may be a prototype, but we think it could be quite a practical computer.

At its heart is the ubiquitous Raspberry Pi 4 paired with a PiSugar power supply and a minimalist mechanical keyboard. The case is the interesting part, because it’s well-designed to be 3D printed in sections with the HDMI display hinging up from above the keyboard. The Pi is open and visible on top of the deck, but this could easily be covered with another printed piece if desired.

So we disagree on the practicality, given a train journey and this cyberdeck we think we could easily crack out a Hackaday article or two. Never undersell your creations, like this one they’re almost certainly better than you think.

If you’d like to see more of the 2022 Cyberdeck Contest, take a look at the best of the best.

Cyberdeck Contest 2022: Gibson Rev 001 Thinks Outside The Pelican Case

October 25, 2022 by Kristina Panos 5 Comments

As we’ve gushed previously in these pages, we saw an incredible turnout for our first-ever cyberdeck contest — so many cool ‘decks rolled in that it made judging them all quite the feat, and we would be remiss if we didn’t feature the favorites that, for whatever reason, didn’t make the cut. One of these is the aptly-named Gibson Rev 001 from [Gadjet].

This cyberdeck may be on the pocket-sized side of things, but don’t let that fool you, because it’s loaded with I/O and sensors galore. A Pimoroni Breakout Garden provides particle/smoke and pulse oximetry, temperature/pressure/altitude, an air quality sensor, and a UVA/UVB light sensor — plenty of feelers for judging conditions on the fly. As you might expect, the brains of the operation is a Raspi 4, which is running Twister OS.

We love the dual-display thing going on with the 7″ touchscreen and the color e-ink display — really gives it a cobbled-together-yet-polished, futuristic feel. May the rest of the post-apocalypse gadgetry have such clean lines and cheerful colors (if that’s what you’re into).

A widescreen slate-style cyberdeck with a small keyboard sits in front of a cassette deck stereo. Headphones sit to the left of the deck and an old Casio calculator watch is to the right.

2022 Cyberdeck Contest: QAZ Personal Terminal

October 22, 2022 by Navarre Bartz 9 Comments

The slabtop form factor has had a resurgence in the cyberdeck community, and [Greg Leo] has designed the QAZ Personal Terminal to be about as small as a slabtop could be while still having full-sized keys.

Since the device is using a 35% QAZ keyboard as its primary input device, [Leo] has helpfully given a quick overview of how text is input in the video below. Coupled with that surprisingly popular 4:1 LCD screen we’ve seen elsewhere, this cyberdeck looks like a modern interpretation of a TRS-80 Model 100. The Banana Pi powering the QAZ Personal Terminal is running Debian with spectrwm, a tiling window manager making arranging windows a breeze with either a mouse or keyboard. The integrated mouse layer on the keyboard means you don’t need a separate mouse at all if you don’t want to spoil the 1980s mobile chic.

[Leo] has another video all about doing calculus on this cyberdeck with the math shortcuts integrated into the keyboard. Fractions, exponents, and common Greek letters are demonstrated. We can see this being a really great note-taking device for engineering and math courses if you wanted something more portable than a laptop.

It’s hard to get very far hacking without a little math. For more math-focused input devices, check out the Mathboard or the MCM/70.

Continue reading “2022 Cyberdeck Contest: QAZ Personal Terminal” →

An ortholinear keyboard with predominantly blank white keycaps. There are two red keycaps on the bottom outside corners. The center of the keyboard houses a large LCD in portrait orientation on a red PCB.

2022 Cyberdeck Contest: Keezyboost40 Is A Cyberdeck Masquerading As A Keyboard

October 20, 2022 by Navarre Bartz 5 Comments

There’s something to be said for über-powerful cyberdecks, but there’s also a certain appeal to less powerful decks squeezed into a tiny form factor. [Christian Lo] has designed a cyberdeck that looks like a simple ortholinear keyboard but is running a more flexible environment.

There are games and animations you can play on QMK, but [Lo] felt that a different framework would give him more flexibility to really stretch the limits of what this Raspberry Pi Pico-powered deck could do. He decided to go with a Rust-based firmware with the keyberon library and says, “it felt like I was in control of the firmware.” While the board is using Rust for now, [Lo] says he’s open to conversations about other firmware options to achieve his goals, like a virtual pet game for the board.

The PCB is described as “bog standard” with the possible exception of placing the Pi in a cutout on the board to keep things as low profile as possible. The trade-off comes in the form of reduced board rigidity and potentially increased strain on the connections to the microcontroller.

Looking for more cool cyberdecks? Check out the Winners of the 2022 Cyberdeck Contest or go see all the entries on the Contest Page.
Continue reading “2022 Cyberdeck Contest: Keezyboost40 Is A Cyberdeck Masquerading As A Keyboard” →

An exploded diagram of the spot welder. Shown are the capacitor bank, trigger, 12 V relay, DC power input, power out, step up converter, voltmeter, industrial SCR module, and capacitor bank.

Hackaday Prize 2022: A Not-So-Smart Spot Welder

October 17, 2022 by Navarre Bartz 5 Comments

DIY spot welders often use high-powered components that can be a bit frightening, given the potential for dangerous malfunctions. [Wojciech “Adalbert” J.] designed his capacitive discharge spot welder to be safe, easy to build, and forego the microcontroller.

Many projects work great with just a single Li-ion cell, but when you need more power, you’ve got to start connecting more cells together into a battery. [Wojciech]’s spot welder is designed to be just powerful enough to weld nickel tabs onto a cell without any overkill. The capacitor bank uses nineteen Nichicon UBY 7500uF/35V capacitors, all wired in parallel using solder wick saturated with solder. They sit atop on a perfboard with metallicized holes to carry the high current.

[Wojciech] has detailed every step of building the welder, including changes to the off-the-shelf relay board and adding a potentiometer to the step-up converter board. The level of detail makes this seem like a good starting place if you’re hoping to hop into the world of DIY spot welders. Safe is always a relative term when dealing with high powered devices, so be careful if you do attempt this build!

DIY spot welders have graced these digital pages many times, including this one built with safety in mind, and this other one that was decidedly not.

2022 Cyberdeck Contest: A Wrist-Worn Deck With A Hybrid Interface

October 16, 2022 by Dan Maloney 4 Comments

You’d think that now that the 2022 Cyberdeck Contest is wrapped up, we’d stop writing about it. Sorry, but no — there were so many great entries that we just can’t help but keep focusing on them. And this wearable hybrid interface cyberdeck has a look we love so much that we can’t resist spotlighting it.

We wouldn’t go so far as to call the “hgDeck” a PipBoy, but [Igor Brkić]’s wrist-worn deck certainly bears some similarity with to the Fallout-famous terminal. In fact, the design for this one is based on his earlier hgTerm Raspberry Pi mini-laptop, which honestly would have made a great entry all by itself. But while the two version shares some similarities, the hgDeck puts a serious twist on the form factor. In the stowed configuration, the Pi Zero W puts the main display, a 3.5″ Waveshare TFT, to work using the resistive touchscreen interface. But with the flick of a finger, a motor flips the monitor up on a set of pantograph linkages, which exposes a compact Bluetooth keyboard. Another touch stows the screen and returns you to touchscreen-only operation.

There were a fair number of wrist-worn decks in the contest’s final results, and while this one didn’t win, [Igor]’s build has got to be one of the cooler designs we’ve seen, one that almost seems practical in the real world.

Continue reading “2022 Cyberdeck Contest: A Wrist-Worn Deck With A Hybrid Interface” →