MIDI Controlled Fire Drums

July 9, 2009 by Nick Caiello 18 Comments

[youtube=http://www.youtube.com/watch?v=Zmp74fO2a38]

Using an MSA-T MIDI Decoder from Highly Liquid, [Rob Darman] was able to take the MIDI output of his Roland V-Drums and use that output to control fire shooting cannons, forming a setup that he calls fire drums. As seen in the video above, the response time between the V-Drums and the fire drums is pretty impressive. While this is by far one of the coolest things that we’ve seen controlled by MIDI, we’re naturally thinking about taking this to the next level; MIDI-controlled fireworks, anyone?

You may remember the MSA decoder devices from people wiring up MIDI drums to Rock Band.

OTTO, Beat Slicing Interface

June 29, 2009 by Eliot 12 Comments

otto

Create Digital Music has a great post on [Luca De Rosso]’s OTTO. Built as part of his masters’ thesis, it’s a unique tangible music interface. You load a sample into the software which displays it on the instrument surface. The user can then manipulate the sample using various hardware inputs while watching the LED representation. The device uses just one Arduino for the display and inputs. It works with Max/MSP and is designed to give the performer only the information they truly need. You can find more pictures of the device on Flickr and a picture of the guts on CDM. Embedded below is the ‘Getting Started’ video that shows it in use.

Continue reading “OTTO, Beat Slicing Interface” →

D-touch Tangible Drum Interface

June 29, 2009 by Caleb Kraft 6 Comments

[youtube=http://www.youtube.com/watch?v=AmGP3eCOF5A]

yes, drums are tangible. We know. What this is, however, is a tangible interface that is a drum machine. The software is freely available for download, after registration. For hardware, all you need is a webcam, a computer, and a way to print out the pieces. D-Touch is cross platform which is very nice. Please note that the software will not run until you activate it by putting in your user account from their site. If you like this project, you might also get a kick out of the Go Sequencer.

Econo Monome

June 25, 2009 by Caleb Kraft 2 Comments

[youtube=http://www.youtube.com/watch?v=6mKjRakndSk]

[Mike] really liked the thought of the Monome, especially the green aspect of their construction. He felt he could take it a step further. After 40 years of electronics tinkering, he had quite a spare parts box. He constructed his monome clone from stuff he just had laying around. All of his pieces were either rejected samples from his company or outdated parts destined for the trash bin. Great job [Mike]. If you are planning to build one and don’t have the buttons laying around, you can get a more typical monome look and feel by going with the sparkfun RGB pads, like we did back in March.

[via Makezine]

Theremin Controlled Mario

June 15, 2009 by Eliot 24 Comments

[youtube=http://www.youtube.com/watch?v=YnZeI8uLJnw]

In the video above, [conquerearth] is using a theremin to control Super Mario Bros. Moving his hand toward and away from the vertical antenna increases the theremin’s pitch. The computer monitors this in real time and moves Mario left and right. The loop antenna controls the theremin’s volume and acts as the jump button. The controls seem to work well, much better than the sound of one man flailing at a theremin.

[via Gizmodo]

Communication Anachronism

June 14, 2009 by Caleb Kraft 22 Comments

anachronism

There aren’t many details, or really any at all here. This was just too fun not to post. Here are two cans strung together, just like when you were a kid. However, when you talk into one the sound is then converted and transmitted to the other via fiber optic cable. Looking at the pictures, it seems that it is only one way though.

MIDI Sequencer/controller

June 13, 2009 by Gerrit Coetzee 12 Comments

lenonluks

Reader, [Lennon Luks] made a really slick MIDI sequencer/controller for his senior design project while studying at Western Carolina University. It has a grid of 64 LED buttons, 8 knobs, and a display with navigation buttons that allow him to sequence tracks with or without a computer. The controller is based off an ATmega644 and is programmed in C. [Lennon] clearly explains the inner workings of the project in detail on his website and has included a good number of pictures. [Lennon] made a nice video of the project which can be seen after the jump.

Continue reading “MIDI Sequencer/controller” →