digital cameras hacks

982 Articles

Toyaanisqatsi: Time Lapse Control Using LEGO Parts

September 6, 2009 by 4 Comments

[youtube=http://www.youtube.com/watch?v=Fm1fFQfGc9M&feature=player_embedded]
A simple panning motion can add impact to the already-dramatic effect of time lapse photography. To accomplish this, frugal cinematographers sometimes build [Rube Goldberg] contraptions from clock motors, VCR parts or telescope tracking mounts. Hack a Day reader [Stephan Martin] has assembled a clever bargain-basement system using an Arduino-driven stepper motor and a reduction gear system built up from LEGO Technic parts, along with some Processing code on a host PC to direct the show.

While the photography is a bit crude (using just a webcam), [Stephan’s] underlying motion control setup might interest budding filmmakers with [Ron Fricke] aspirations but Top Ramen budgets. What’s more, unlike rigid clock motor approaches, software control of the camera mount has the potential for some interesting non-linear, fluid movements.

Ruggedize Your Not-so-rugged Portables

August 25, 2009 by 13 Comments

waterlaptop-470-0909

Popular Mechanics has a detailed how-to on diy ruggedization of common portable electronics such as laptops, cameras, and cellphones. There is video of a laptop surviving an eight foot fall due to the tennis balls, pipe insulation, and weather stripping they’ve added. Its not just shock resistant, they’ve used a two-part compound marketed for making custom molded earplugs to make the laptop water resistant.

Making A Tilt-shift Lens

July 28, 2009 by 15 Comments

tilt

[Bhautik] is on version 2 of his tilt-shift lens, and wrote in to share what he has learned. Some aspects of the design on version 1 made it a bit quirky to use. You had to hold the lens in place, manually adjusting the focus. This meant that no two shots were the same. Since [Bhautik] wanted to do time lapse with it, he needed to re design it. He kept it simple and cheap, around $22 total.  Version two takes a lot longer to setup for the shot, but the result is reproducible. This means he can make his tilt-shift time lapse videos.

Scanner Sensor Multi Touch

July 27, 2009 by 28 Comments

[vimeo= http://vimeo.com/5765795]

[Kyle McDonald] had a Visioneer XP 100 portable scanner laying around, so he started trying to come up with alternative uses for it. In the video above, we can see a multitouch setup rigged together using Openframeworks in Ubuntu. As you can see in the video, there’s some considerable lag. That is due to the 250-500 ms of buffering built into the scanner. It does have nice resolution; 10k pixels wide at 60 fps, so it has to be useful for something (aside from scanning). Anyone got any ideas? He says if the field of view was wider, he’d use it on a river bed to watch fish.

Camera Peltier Cooler

July 23, 2009 by 36 Comments

ir

[Gary Honis] has been modifying his Canon Digital Rebel XSi in order to do astrophotography. He previously removed the IR filter and replaced it with a Baader UV-IR cut filter that lets most infrared light through. However, in order to reduce noise in the pictures, he had to cool the camera down. He based the project on a peltier cooler that he salvaged from a powered beverage cooler. He made a small aluminum box and insulated it with styrofoam to hold the camera body. The peltier cooler was then attached on the side. It takes just over an hour to cool the camera down to 40 degrees, but the shots come out a lot clearer.

[thanks adam]

$15 HDR Camera

July 16, 2009 by 28 Comments

rewire1 (Custom)

[Steve] was planning a 15 mile hiking trip when he came up with this idea. He wanted to get some good HDR photography, but didnt’ want to lug around his 5D MKII. He managed to pick up a couple of cheap Polaroid X530s. These have decent optics and record in RAW format, which is pretty impressive for something he got for 99cents plus shipping. He had all of the buttons wired for external control via a Viliv umpc. As you can see on his site, his results are quite nice. Of course, you don’t actually have to hack your camera to make HDR images.

Augmented Reality Business Card

July 15, 2009 by 20 Comments

[vimeo 4979525]

Embedded above is a neat augmented reality business card by ActionScript developer [James Alliban]. After seeing “the most impressive business card you will ever see“, he was inspired to update his own business card. His new card has a fiduciary marker on the backside and directs you to his site. A flash app on the site displays a video where he tells you more about himself. The 3D grid of planes in the video varies in depth based on the brightness of the section. He has a few more AR and tracking demos on Vimeo.

Updated: While we’re talking augmented reality, it’s worth checking out the tech behind ESPN’s baseball tracker that uses doppler radar.

Related: Augmented reality in Flash

[via Josh Spear]