Steorn Orbo Motor Replica

February 21, 2010 by Mike Szczys 178 Comments

Reader [Hjhndr] ran across an interesting set of tests and wanted to know if they’re brilliant or just a load of bull. We’re not making the call on that, but the tests on a Steorn Orb motor replica are worth looking at.Keep in mind, people used to think the earth was flat and scientists of the time would have sworn up and down that’s the way things were.

The Steorn Orbo is a motor that generates more power than is put into it. At least according to Steorn Limited that’s what it does. An independent panel of scientists said otherwise a few years back but that didn’t stop the company from showing off the concept a few more times, most recently a showing in Dublin ended this month.

So anyway, [Jean-Louis Naudin] took what he saw from those demonstrations and built a replica. He’s made several papers about the principle as well as his testing available online. There’s a lot of math, a little bit of smoke and mirrors, and several videos. Take a look and let us know what you think in the comments.

Cannihilator Can Crusher

February 18, 2010 by Mike Szczys 49 Comments

This box will crush your cans and deposit them in the bin below. Branded the Cannihilator, [Jeff Walsh] built this with his two sons, [Jake] and [Ryan]. Early hacking eduction is important if they want their future projects to be regular Hackaday features.

The crushing power is provided by a solenoid pneumatic ram. As seen in the video after the break, the can goes in the door on the left, is crushed, then drops through a slot. [Jeff] had fingers and hands in mind when designing this and included a few safety features. The “crush” button is locate on the opposite end from the can slot, there is a kill switch to disable the solenoid, and a keyed switch to shut the whole apparatus down. A Basic Stamp 2 microcontroller handles the electronics with the help of a daughter-board to manage the load switching. This is a nice addition to the creative can crushers out there.

Continue reading “Cannihilator Can Crusher” →

Converting A Miata To All-electric

February 15, 2010 by Mike Szczys 23 Comments

[Henry Herndon] converted a Mazda Miata to an all-electric vehicle. There’s a ton of great information in his archives, as well as a round-up video that we’ve embedded after the break. It’s interesting to see him implement two different types of Nalgene bottles as coolant reservoirs. The polycarbonate on the first shattered on him but the soft plastic replacement seems to have done the trick. The batteries add a lot of weight to the vehicle and he ends up refitting the suspension to compensate. [Henry] registered the vehicle with the state and now has a street legal EV of his own design.

Also worth a look is his post covering the 2009 Wayland Invitational. There as a large collection of electric vehicle conversions at the get together.

Continue reading “Converting A Miata To All-electric” →

Things That Kill You, Hacked For Clean Energy

January 25, 2010 by Mike Szczys 26 Comments

Tobacco and E coli can wreak havoc on your body causing serious damage if not death. Some researchers from the University of California at Berkeley have found a way to take these potentially dangerous organisms and make them do our bidding. By genetically engineering a virus they have shown that the two can be used to grow solar cells. Well, they grow some of the important bits that go into solar cells, reducing the environmental impact of the manufacturing process.

Once a tobacco plant is infected with the altered virus it begins producing artificial chromophores that turn sunlight into electricity. Fully grown plants are ground up, suspending the chromophores in a liquid which is sprayed onto glass panels to create the solar cells. This types of creative solar energy production make us wonder if Thunderdome and the apocalypse are further off than we thought.

[Thanks Jon]

Cold Climate Solar Water Heater

January 11, 2010 by Mike Szczys 30 Comments

Here’s a solar water heater setup that augments your home’s water heater instead of replacing it. The system monitors a solar collector panel on the roof for temperature. If the temperature is warm enough, a photo voltaic cell powered pump circulates cold water through the system. The heated water returns to the top of the home’s water heater. Unlike the warm-climate solar heater we saw earlier, this one can withstand freezing because it uses silicone tubing in the collector.

[Thanks Marius]

Generate Electricity With A Candle

January 5, 2010 by Mike Szczys 67 Comments

What you see above is a generator that converts heat to electricity. [Reukpower’s] thermoelectric lamp is one of those hacks that makes you scratch your head even though you understand why it should work. The heart of the system uses a Peltier cool, just like the thermoelectric solar generator. When there is a temperature differential from one side of the Peltier to the other a small current is generated.

In this case a candle heats one side and a heat sink cools the other. The tiny voltage picked up from the Peltier’s contacts is then boosted using a joule thief. We’ve seen LEDs powered with a joule thief before, benefiting from their own low power consumption. In this case, the boost circuit is scavenged from an emergency phone charger and probably achieves higher efficiency than if he had built it himself.

Aerodynamic Tail Makes Geo Metro Even Cooler

December 25, 2009 by Mike Szczys 77 Comments

[MetroMPG], an environmentally friendly car enthusiast from Ontario, added a tail to his car to increase gas mileage. This 1998 Pontiac Firefly is a sibling of the cheap and popular Geo Metro. He had already done some work to cover a portion of the rear wheel wells to reduce drag. Using cardboard, duct tape, and an aluminum frame he extended the rear of the car by around six feet.

The results are pretty impressive. His extensive testing can be seen in the video after the break and reveals a Miles Per Gallon increase of 15.1% at 90 km/h to get to 64 MPG. The tail is removable but we’re thinking it’s a pain to keep relocating the tail lights from the original body to the removable one.

Now we’re wondering if someone is doing this to our Smurf-blue Metro that we sold to the junk man for $100 back in 2001. It ran great, if you weren’t caught in the cloud of blue smoke coming out the back.

Continue reading “Aerodynamic Tail Makes Geo Metro Even Cooler” →