Intelligent Ground Vehicle Competition 2010 Day Two Report

June 7, 2010 by Gerrit Coetzee 11 Comments

Culture Shock II, a robot by the Lawrence Tech team, first caught our eye due to its unique drive train. Upon further investigation we found a very well built robot with a ton of unique features.

The first thing we noticed about CultureShockII are the giant 36″ wheels. The wheel assemblies are actually unicycles modified to be driven by the geared motors on the bottom. The reason such large wheels were chosen was to keep the center of gravity well below the axle, providing a very self stabilizing robot. The robot also has two casters with a suspension system to act as dampers and stabilizers in the case of shocks and inclines. Pictured Below. Continue reading “Intelligent Ground Vehicle Competition 2010 Day Two Report” →

Intelligent Ground Vehicle Competition 2010 Day One Report

June 5, 2010 by Gerrit Coetzee 19 Comments

The Intelligent Ground Vehicle Competition (IGVC) is the precursor to the DARPA Grand Challenge, and in many ways it is just as difficult. We have the pleasure of being at the competition this year with the Tennessee Technological University Autonomous Robotics Team. The teams at the competition pull off some amazing home-brew robotics, so we’ve decided to do a short section on some exemplary robotic hacking each day of the competition.

Today’s robot comes from the York College of Pennsylvania. The robot, dubbed “Green Lightning”, features an impressive set of custom made hardware.

We interviewed the team, and got a pretty thorough rundown of their robot with pictures after the jump. Continue reading “Intelligent Ground Vehicle Competition 2010 Day One Report” →

LEGO Pick And Place

May 31, 2010 by Mike Szczys 8 Comments

[youtube=http://www.youtube.com/watch?v=YoXCn4Gh_HA&w=470]

Turn your volume down and take a look at the brick sorting robot in the video above. It’s built using LEGO and powered by four different NXT modules. It sorts differently colored bricks on the intake conveyor and places them on three output conveyors. The build is solid and was [Chris Shepherd’s] impetus for starting a blog. We appreciate the pneumatic tricks that he detailed in some of his earlier posts such as a compressor, pressure switch, and air tank system. His advice is “build, build, build” and that’s what you’d have to do to perfect a monster of this size and scope.

The Story Of Mr. Stabby

May 26, 2010 by Caleb Kraft 24 Comments

[youtube=http://www.youtube.com/watch?v=XHvXPOSaNbg]

Mr. Stabby was once a broken down bum, sitting on the curb, waiting for an eternity in the city dump. Luckily, someone found him and brought him to the NYC Resistor hacker group. They promptly performed some modifications and brought him back to life.

He’s now a happy go lucky stab-bot with a twinkle in his eye and a skip in his step. His repitoir includes gouging, slashing, and of course stabbing. He can be controlled via a cell phone and has a nifty voice interface.

The video above is from when Mr. Stabby was runner up at the tech crunch hackday.

Poor MABEL

May 25, 2010 by Caleb Kraft 23 Comments

[youtube=http://www.youtube.com/v/IlWIWf4daNs]

At first, watching this video of MABEL, a bipedal robot for studying dynamic gaits, we didn’t know if we should be scared or feel sad. By the end, we know that sadness prevailed. Poor MABEL, forced into a grueling routine, is not even allowed to rest when her leg breaks.

To be serious though, MABEL is quite impressive. Instead of using a direct drive on the legs, motors are attached to springs that act like tendons. This helps compensate for variances in the walking surface, hopefully allowing for smoother transitions between gaits as well. As you can see, MABEL handles the height differences quite well, albeit a bit slowly. It is worth noting that there are no visual sensors on MABEL and everything is done through feedback from her gait.

BAMF2010: QB Goes To Meetings, Shoots Lasers From Eyes

May 24, 2010 by Phil Burgess 13 Comments

No, it’s not an extra from Wall-E. “QB” is the latest telepresence robot from Silicon Valley firm Anybots. QB combines two-way videoconferencing with a Segway-style self-balancing platform. The idea is to provide mobility and more natural interaction than desktop-tethered conferencing can provide.

The 35 pound robot’s battery runs for six to eight hours, and the telescoping head allows the eye level to be adjusted to match the user’s natural viewpoint. What looks like stereo vision is actually a single camera on the left eye and a steerable laser pointer on the right.

Shipping this October for $15,000, QB will appeal mostly to businesses with specific telepresence needs. This is half the price of their prior QA model — and in time the technology may reach the mass-market level. Until then, we’ll just have to amuse ourselves by remotely attending meetings with our ankle-nipping Rovio robots.

Cathode Ray Tube Leads The Way On This Bot

May 18, 2010 by Mike Szczys 32 Comments

[Daqq’s] latest creation is this little robot with a CRT mounted on the front. Obviously ‘why?’ is the wrong question here, but we know this is right up his alley considering his propensity for the less common like this plasma ball Nixie tube. The solidly-built bot uses two stepper motor controlled wheels and an omni-wheel on the front to create a trike. An ATmega128 controls the system but the real story here is the CRT. It requires a hefty voltage regulator for the -600V to +200V the Tungsram DG7-123 tube needs. Trouble along the way ranged from dealing with stray magnetic fields from the power supply, to mounting the fragile tube itself. Take a look at his detailed writeup linked above and join us after the break for the demo videos.

Continue reading “Cathode Ray Tube Leads The Way On This Bot” →