Month: April 2017

Cerebrum: Mobile Passwords Lifted Acoustically With NASB

April 1, 2017 by 35 Comments

 

There are innumerable password hacking methods but recent advances in acoustic and accelerometer sensing have opened up the door to side-channel attacks, where passwords or other sensitive data can be extracted from the acoustic properties of the electronics and human interface to the device. A recent and dramatic example includes the hacking of RSA encryption  simply by listening to the frequencies of sound a processor puts out when crunching the numbers.

Now there is a new long-distance hack on the scene. The Cerebrum system represents a recent innovation in side-channel password attacks leveraging acoustic signatures of mobile and other electronic devices to extract password data at stand-off distances.

Continue reading “Cerebrum: Mobile Passwords Lifted Acoustically With NASB” →

Scratchy Brings Digital Clarity To The Vinyl World

April 1, 2017 by 18 Comments

If you walk the halls of audiophilia, you may be aware that there has been a huge amount of work put in to software designed to clean up older audio recordings without compromising the quality of the recording itself. Sometimes the results can be amazing, such as when a stereo image is created from parallel mono recordings made before stereo was even a glint in the eye of a 1930s EMI engineer.

Bob Widlar on analogue versus digital. Original: EDN
[Bob Widlar] on analogue versus digital. Original: EDN.
But what if you are at home, without the benefit of a state-of-the-art studio or high-end digital signal processing? How can you then have pop and crackle free sound from your hi-fi when you put on a piece of vinyl? [Paul Wallace] may just have the answer, he’s made a smartphone app called Scratchy which listens to the output of a turntable, identifies the track being played, and plays the appropriate MP3 file for a digital experience from vinyl. It uses the algorithm published by Shazam to recognize tunes. The software also has a learn mode during which it can be taught about new records in the collection. The app itself is written using the Xamarin framework and has its source code in his GitHup repository, so it’s possible it could be produced for other platforms as well as Android.

Now vinyl purists will be speechless with horror at this wanton desecration of their format while audiophiles will be fuming at the smeary-in-the-midrange MP3s, but we can see its appeal if your vinyl is on the grubby side. It’s fair to say though that the stereo here won’t be sporting it, you’ll tear our analogue signal path from our cold dead hands. Take a look for yourselves, he’s put up a video showing it in operation.

Continue reading “Scratchy Brings Digital Clarity To The Vinyl World” →

Ask Hackaday: Which Balaclava Is Best For Hacking?

April 1, 2017 by 86 Comments

At Hackaday, we’re tapped into Hacker Culture. This goes far beyond a choice of operating system (Arch Linux, or more correctly, ‘Arch GNU/Linux’, or as I’ve recently taken to calling it, ‘Arch GNU plus Linux’).  This culture infects every fiber of our soul, from music (DEF CON’s station on Soma FM), our choice in outerwear (black hoodies, duh), and our choice in laptops (covered in stickers). We all wear uniforms, although a gaggle of computer science and electronics nerds all wearing black t-shirts won’t tell you that. We all conform, whether we’re aware of it or not.

Despite a standardized uniform for this subculture, one small detail of this Hacker Uniform has remained unresolved for decades. Are one-hole or three-hole balaclavas best for hacking? Which balaclava is best for stealing bank accounts and hacking into NASA computers? What offers the best protection from precipitating ones and zeros in a real-life Matrix screensaver?

Continue reading “Ask Hackaday: Which Balaclava Is Best For Hacking?” →

Quadruped Robot Can Crawl Under Cars And Jump-Kick-Open Doors

April 1, 2017 by 31 Comments

The wheel is a revolutionary invention — as they say — but going back to basics sometimes opens new pathways. Robots that traverse terrain on legs are on the rise, most notably the Boston Dynamics Big Dog series of robots — and [Ghost Robotics]’ Minitaur quadruped aims to keep pace.

One of [Ghost Robotics] founders, [Gavin Knneally] states that co-ordination is one of the main problems to overcome when developing quadruped robots; being designed to clamber across especially harsh terrain, Minitaur’s staccato steps carry it up steep hills, stairs, across ice, and more. Its legs also allow it to adjust its height — the video shows it trot up to a car, hunker down, then begin to waddle underneath with ease.

Continue reading “Quadruped Robot Can Crawl Under Cars And Jump-Kick-Open Doors” →

Review: The O-scope Mayer D4/WG5 Calibrated Fleshy Test Probe

April 1, 2017 by 54 Comments

A selection of probes, from [Jim Williams'] Linear Technology app note 72.
A selection of probes, from [Jim Williams’] Linear Technology app note 72.
It’s not often that we are shown an entirely new class of test equipment here at Hackaday, so it was with some surprise that we recently received the new O-scope Mayer offering. If your most simple piece of test equipment is your own finger, able to measure temperature, detect voltage, and inject a 50 or 60 Hz sine wave, then what they have done is produce a synthetic analogue with a calibrated reading. The idea is that where previously you could only say “Too hot!”, or “High voltage!”, you should now be able to use their calibrated probe to gain an accurate reading.

The O-scope Mayer D4/WG5 Calibrated Fleshy Test Probe is a roughly 4″ (100mm) long cylinder of their InteliMeat™ synthetic finger analogue terminated with a calibrated matching unit and a BNC socket. In the box aside from the instruction leaflet is a BNC lead through which you can connect it to your oscilloscope.

Continue reading “Review: The O-scope Mayer D4/WG5 Calibrated Fleshy Test Probe” →

New Fonts For GEDA PCB Tool

April 1, 2017 by 20 Comments

In the open-source world, there are two main choices for PCB design: KiCad and gEDA. But if you’re tired of the boring Hershey fonts telling you which resistor is which, or if you need to comply with ISO 3098, there’s one clear choice: PCB-RND, the improved fork of gEDA’s PCB tool. Why?

Because PCB-RND now supports osifont, which supports a ridiculous number of languages. In addition to the usual suspects, like Azerbaijani through Vietnamese, support has also been added for legacy users, including those of Middle Earth, who build PCBs that can only be read when the thrush knocks by the setting sun of the last light on Durin’s Day.

And they haven’t stopped there. Looking forward to the Treaty of Organia in 2267, you can now create PCBs that are fully plqaD-HaSta compliant.

We’re glad to see these important steps made toward reaching out to underserved PCB-constructing communities. However, we’re appalled at the continuing lack of support for Rihannsu. This will have to be rectified by anyone who wants to push their projects in the Beta Quadrant.

Introducing The Hackaday Passive Aligned Ferrite Active Quantum Crystal Nanoparticle Reference Sticker

April 1, 2017 by 60 Comments

As you know, here at Hackaday we take our audio equipment very seriously indeed. We’ve seen it all over the years and have a pretty jaded view of a lot of the audiophile products that come past our door, but once in a while along comes something that’s a bit special. That’s why today we’d like to introduce you to a new product, The Hackaday Passive Aligned Ferrite Active Quantum Crystal Nanoparticle Reference Sticker.

Here’s the problem: we’re surrounded by electrical noise. You can’t see it, you can’t touch it, and you can’t hear it, but your audio equipment can, and when that happens it will degrade your listening experience without your realising it. You might have shelled out your life savings on a top-end Hinari amp, Marc Vincent surround sound processor, Friedland carillon wire cables and a set of Saisho floor-standing speakers, but if you haven’t dealt with your system’s magnetic compatibility they’re never quite going to reach their potential and you’ll always be left wondering why your broader soundstage just doesn’t zing. You need an HPAFAQCNRS.

Continue reading “Introducing The Hackaday Passive Aligned Ferrite Active Quantum Crystal Nanoparticle Reference Sticker” →