Get Into Biohacking On The Cheap With This Electrophoresis Rig

May 11, 2017 by Dan Maloney 31 Comments

If you want to get into electronics, it’s pretty straightforward: read up a little, buy a breadboard and some parts, and go to town. Getting into molecular biology as a hobby, however, presents some challenges. The knowledge is all out there, true, but finding the equipment can be a problem, and what’s out there tends to be fiendishly expensive.

So many would-be biohackers end up making their own equipment, like this DIY gel electrophoresis rig. Electrophoresis sorts macromolecules like DNA or proteins by size using an electric field. For DNA, a slab of agarose gel is immersed in a buffer solution and a current through the tank moves the DNA through the gel. The shorter the DNA fragment, the easier it can wiggle through the pores in the gel, and the faster it migrates down the gel. [abizar]’s first attempt at a DIY gel rig involved a lot of plastic cutting and solvent welding, so he simplified the process by using the little plastic drawers from an old parts cabinet. With nichrome and platinum wires for electrodes for the modified ATX power supply, it’s just the right size and shape for the gel, which is cast in a separate mold. The video below shows the whole build, and while [abizar] doesn’t offer much detail on recipes or techniques, there are plenty of videos online to guide you.

Need more apparatus to deck out your lab? We’ve got you covered there too.

Continue reading “Get Into Biohacking On The Cheap With This Electrophoresis Rig” →

Translate Color To Smell With Bouquet

May 11, 2017 by John Baichtal 7 Comments

Hope springs eternal for Smell-O-Vision. [Niklas Roy] recently taught a workshop called Communication Devices at ÉCAL in Lausanne, Switzerland. Four of his Media & Interaction Design students built a scanner that detects colors and emits a corresponding scent.

The project consists of an Arduino connected to a color sensor as well as a SparkFun EasyDriver. The EasyDriver controls a stepper motor which rotates a disc of scent swatches so you sniff the swatch corresponding with the color. The students chose strawberry for red, and blue ended up being “ocean”-scented room spray.

With design students involved it’s no surprise the project looked good. Bouquet’s creators [Erika Marthins], [Arthur Moscatelli], [Pietro Alberti] and [Andrea Ramìrez Aburto] gave the device an intriguingly featureless look, and the “olfactory graphic design” posters they created to demonstrate it look great as well.

[Niklas Roy]’s excellent projects have graced the pages of Hackaday many times before. Be sure to check out his RC Beer Crate, his Music Construction Machine, and his Thermal Imaging Rig if you haven’t already.

Continue reading “Translate Color To Smell With Bouquet” →

Hackaday Prize Entry: Open Source Electrospinning

May 11, 2017 by Brian Benchoff 21 Comments

Electrospinning is the process of dispensing a polymer solution from a nozzle, then applying a very high voltage potential between the nozzle and a collector screen. The result is a very, very fine fiber that is stretched and elongated down to nanometers. Why would anyone want this? These fibers make great filters because of their large surface area. Electrospinning has been cited as an enabling technology for the future of textiles. The reality, though, is that no one really knows how electrospinning is going to become a standard industrial process because it’s so rare. Not many labs are researching electrospinning, to say nothing of industry.

[Douglas Miller] is building his own electrospinning machine. Except for the ominous warning signs on the 40-kilovolt power supply, there’s nothing in this machine that makes it look any different from a normal, homebrew 3D printer. There are stepper motors inside to raise and lower a carriage, a syringe, and a handy USB port. If you didn’t know any better, you could easily assume [Doug]’s OpenESpin is designed to print fidget spinners and tiny tugboats instead of films of carbon nanotubes and piezoelectric thermoplastics.

The DIY electrospinning machine is really what the Hackaday Prize is all about. It’s an enabling technology anyone can build for a few hundred dollars that also allows real science to happen. The films and blobs being formed in [Doug]’s electrospinning machine could easily find a home in a PhD candidate’s thesis or as a component in cutting edge research on everything from battery technology to the Internet of Underpants.

Tearing Down The Boss Phone

May 11, 2017 by Alasdair Allan 84 Comments

Poke around enough on AliExpress, Alibaba, and especially Taobao—the Chinese facing site that’s increasingly being used by Westerners to find hard to source parts—and you’ll come across some interesting things. The Long-CZ J8 is one of those, it’s 2.67 inch long and weighs just 0.63 ounces, and it’s built in the form factor of a Bluetooth headset.

A couple of months ago Cory Doctorow highlighted this tiny phone, he’d picked up on it because of the marketing. The lozenge-shaped phone was being explicitly marketed that it could “beat the boss”. The boss in question here being the B.O.S.S chair—a scanning technology that has been widely deployed across prisons in the U.K. in an attempt to put a halt to smuggling of mobile phones to inmates.

The Long-CZ J8 is just 2.67 inch (6.8cm) long.

I wasn’t particularly interested in whether it could make it through a body scanner, or the built-in voice changer which was another clue as to the target market for the phone. However just the size of the thing was intriguing enough that I thought I’d pick one up and take a look inside. So I ordered one from Amazon.

Continue reading “Tearing Down The Boss Phone” →

Just In Time For Summer: A Remote Controlled Snowblower

May 11, 2017 by Brian Benchoff 16 Comments

It’s May, and you know what that means: we’re winding down from a worldwide celebration of the worker, pollen is everywhere, Hackaday readers in the southern hemisphere are somehow offended, and somewhere, someone is finishing up a remote-controlled snow blower build.

In this nine-part, two-hour-long video series, [Dave] covers the planning and fabrication of one of the most coveted of all cold weather yard instruments. It’s a remote-controlled snow blower. Just think: instead of bundling up to go blow the driveway off, [Dave] can get all the snow off his driveway from the comfort of his living room window. Sure, it may not sound like a big deal now that it’s Crocs & Socks weather, but this is going to be a great invention in seven or eight months.

This snow blower robot is built around two motors taken from an electric wheelchair. Most snowblowers already have tracks, so the ever-important traction for this build is already taken care of. A linear actuator takes care of the angle of the ‘scoop’, and a clever confabulation of bicycle sprockets, chain, and a motor allows the ‘chute’ of the snowblower to be pointed in any direction. The electronics are simple enough – a normal, off-the-shelf RC transmitter and receiver handles the wireless communication while an Arduino takes those signals and turns them into something the relays and motors understand.

This is one of the better build vlogs we’ve seen. There are nine parts to this build, we’ve included the final, wrapup video below.

Continue reading “Just In Time For Summer: A Remote Controlled Snowblower” →

History Of Git

May 11, 2017 by Al Williams 89 Comments

Git is one of those tools that is so simple to use, that you often don’t learn a lot of nuance to it. You wind up cloning a repository from the Internet and that’s about it. If you make changes, maybe you track them and if you are really polite you might create a pull request to give back to the project. But there’s a lot more you can do. For example, did you know that Git can track collaborative Word documents? Or manage your startup files across multiple Linux boxes?

Git belongs to a family of software products that do revision (or version) control. The idea is that you can develop software (for example) and keep track of each revision. Good systems have provisions for allowing multiple people to work on a project at one time. There is also usually some way to split a project into different parts. For example, you might split off to develop a version of the product for a different market or to try an experimental feature without breaking the normal development. In some cases, you’ll eventually bring that split back into the main line.

Although in the next installment, I’ll give you some odd uses for Git you might find useful, this post is mostly the story of how Git came to be. Open source development is known for flame wars and there’s at least a few in this tale. And in true hacker fashion, the hero of the story decides he doesn’t like the tools he’s using so… well, what would you do?

Continue reading “History Of Git” →

They Have Electronics In Junk Mail Now

May 11, 2017 by Lewin Day 50 Comments

On the way to the mailbox, you might be expecting bills, birthday cards, perhaps a grocery store catalogue or two. [Steve] was like you, once – until an embedded computer showed up in the junk mail.

The mailer turned out to be from the Arconic corporation – some sort of publication trying to sway a board of directors vote one way or the other. But far more interesting is the hardware inside. The device consisted of a 3″ LCD screen within folded cardboard, some buttons and a micro USB port. After the device let the smoke out when [Steve] attempted to charge it, the next step was naturally to perform a full teardown.

It was a simple job to identify the chips inside which still had their factory markings, and [Steve] found that it appeared to share its design with an Audi marketing material from 2014. It’s rather amazing that such technology is cheap enough for this sort of mass mailout, though [Steve] notes that it’s rather an imprudent move to post out a “fire hazard that needs to be specially recycled”.

This reminds us of the e-paper Esquire magazine display from a few years back.