Drawing Things Very Slowly, Very Easily

August 6, 2012 by Brian Benchoff 5 Comments

A while back, we saw [Euphy]’s polar pen plotter project. The mechanics of the build are very simple – just a pair of motors attached to a pen by a beaded cord. Even though the build is very simple, it’s possible to create awesome works of art albeit very slowly.

Since we featured [Euphy]’s polar pen plotter, a lot of improvements have been made. Now the Polargraph has an SD card slot for computer-less printing, a touch screen for manual control of the plotter, and a few new drawing styles that improve on the previous version a lot.

Right now the improved version of the Polargraph is set up in the front of a graffiti art supply shop in Edinburgh where it spends its time slowly drawing a window dressing. [Euphy] put up a few videos of what the Polargraph is capable of doing, very impressive and we hope he gets a few more PCBs in soon.

Continue reading “Drawing Things Very Slowly, Very Easily” →

POV Bike Wheels With The MSP430

August 6, 2012 by Brian Benchoff 10 Comments

Being an intern a Texas Instruments isn’t all fun and games, but from [George], [Valerie], and [Ryan]’s TI intern design project, it sure looks like it. They built a persistence of vision display for a bicycle using the ever popular MSP430 Launchpad board.

The team of interns created a POV display by combining the power of the TI Launchpad with a row of 32 RGB LEDs soldered onto a booster pack. Once the whole circuit is fastened securely to the bike wheel, a hall effect sensor mounted to the bike frame allows the MSP430 to detect how fast it is going. From there, it’s just a matter of flashing LEDs at the right time to create a stationary display inside a rotating wheel.

Although the display will theoretically work with just one Launchpad/Booster pack combo, the team decided to use three of these circuits, totaling 96 LEDs per wheel, to create a really nice RGB display. The video (available after the break) shows a little bit of flicker but this is an artifact of the camera. In real life, the POV bike wheel display is simply stunning.

Continue reading “POV Bike Wheels With The MSP430” →

Curiosity Landed, Here’s The LEGO Version

August 6, 2012 by Brian Benchoff 10 Comments

The Mars Science Laboratory hasn’t had her wheels down for a day and already the Curiosity-inspired builds are rolling in. [Will] and [Doug] built a LEGO model of the Curiosity rover for the Build the Future in Space event at NASA’s Kennedy Space Center. Everything on this scaled-down version of Curiosity is completely made out of LEGO, including the four powered wheels, motorized mast, and articulated, controllable arm.

The LEGO rover contains 7 NTX bricks, 13 motors, two power function motors, and over 1000 pieces of LEGO held together without any glue. The rover is under remote control from two operators. The driver controls the rotation and direction of the four powered corner wheels, while another operator uses a Waldo-like manipulator built out of LEGO to move Curiosity‘s mast and arm. Each of these controls communicate with the rover over a Bluetooth connection.

We’ve been wondering when we would see a Curiosity-inspired rocker bogie bot, and we’re pleased as punch the first one just happened to be a LEGO build. Having [Will] and [Doug] time their submission to the Curiosity’s landing on Mars is the icing on the cake.

You can see the LEGO Curiosity in action after the break.

Continue reading “Curiosity Landed, Here’s The LEGO Version” →

Learn A New Language With The Babel Fish

August 6, 2012 by Brian Benchoff 8 Comments

The Babel fish from Hitchhiker’s Guide to the Galaxy is one of the strangest things in the universe. After inserting a Babel fish into your ear, it feeds off brain wave energy and excretes a matrix from the conscious frequencies into the speech areas of the brain. It’s invaluable as a universal translator, but until Earth is targeted for demolition we’ll have to make do with [Becky] from Adafruit’s Babel fish language toy.

[Becky]’s Babel fish is still able to feed off the energy given off by language, but in this case the energy comes from a set of RFID cards on which Chinese characters are written. After waving these RFID flash cards in front of the Babel fish, a wave shield connected to the Arduino plays a recording of how the logogram on the flash card should sound when pronounced.

While it’s not a biologically engineered fish that simultaneously proves and disproves the existence of god, every human endeavor – learning a language included – needs more [Douglas Adams] references. You can check out [Becky]’s Babel fish demo video after the break.

Continue reading “Learn A New Language With The Babel Fish” →

Not Quite Building A Raspi Arduino Bridge

August 5, 2012 by Brian Benchoff 9 Comments

A few months ago, [Omer] sent in a Raspberry Pi to Arduino bridge he’s been working on called Ponte. Now that he’s gotten a few assembled, he can actually test out his ideas for combining the powerful Raspi with the ubiquitous Arduino.

Ponte revision 0 used a pair of 12-bit analog to digital converters, but during the soldering and debugging phase of development [Omer] discovered a few things were wrong with his original design. The FETs on the fabricated boards had the drain and source pins mixed up, but that problem was easily solved with a bit of board surgery.

The worst problem was the mechanical design of Ponte rev. 0 – the power jack on the Ponte is directly above the Raspi’s USB port, meaning it’s impossible to plug the Ponte into the Pi.

[Omer] is working on these problems and should have the revised boards completed shortly. A few people have asked where they can get a Ponte, but right now there are no plans to assemble and ship boards. That may change, but for now if might be worth bugging [Omer] to put his new and improved Ponte (with an 8-port I2C port expander!) up on SeeedStudio

Wireless Sensors Without A Microcontroller

August 5, 2012 by Brian Benchoff 17 Comments

While cruising the Internet one day, [Raj] found a really cool pair of RF transmitters and receivers manufactured by Dorji Applied Technology. These modules – the DRF5150S and DRF4432S – work just like any other ISM band transmitter receiver pair with the addition of inputs for analog and digital input pins. [Raj] put together a tutorial for using these radio modules, perfect if you need a very simple wireless connection for your next project.

[Raj]’s tutorial for using the Dorji sensor modules shows the transmitter has two operating modes. The first mode is a simple data transmitter, connected to a microcontroller through a UART connection. The ‘sensor’ mode doesn’t require a separate chip; the on-board STM8L151 microcontroller reads analog values on two pins and sends them over the air to the DRF4432S receiver module.

After programming the transmitter to function as a wireless sensor with an app released by Dorji, [Raj] plugged the transmitter into a breadboard with a battery and digital thermometer. The receiver module is plugged into a USB -> UART module, and data is pulled down from the sensor in a terminal.

[Raj] wrote a small app in Processing to display the data coming from the sensor. He has a wonderful animated thermometer showing the temperature reading of the sensor, the battery voltage and the strength of the wireless signal. Pretty easy, and a very helpful tutorial if you need an easy way to build a wireless sensor.

N64 Controller Mod Means Playing Games Akimbo

August 5, 2012 by Brian Benchoff 8 Comments

Star Wars Episode 1 Racer for the Nintendo 64 has a rather interesting feature: by entering the code RRDUAL on the cheats menu, it’s possible to plug two controllers into the console and control each engine independently. This gives the game an awesome arcade feel, but dual-wielding N64 controllers is a bit of a burden. [Clarky] thought it would be a good idea to combine two controllers into one, and the Star Wars Racer controller is the result.

Like most console mods, the build began by tearing apart two N64 controllers and gluing them together. With a ton of bondo, sanding, and fiberglass, [Clarky] had a mutated N64 controller perfect for the Episode 1 game.

[Clarky] will be updating the build with a built-in rumble pak, but for now he’s doing his best to learn how to fly a pod racer with both hands. You can check out the demo of his build after the break where he plays the Star Wars game as well as a round of Goldeneye using his akimbo controller.

Continue reading “N64 Controller Mod Means Playing Games Akimbo” →