A 3D Printed Aerial Drone

August 3, 2011 by Jeremy Cook 21 Comments

Drones come in many shapes and sizes, but now they can also be 3d printed! To make these drones, the [Decode] group used a selective laser sintering process which is pretty interesting in itself. Once the printing process is done, these little planes are built with only five structural and aerodynamic components. Because of their simplicity, these drones can reportedly be assembled and ready to fly with no tools in only ten minutes!

This design was done by the [Engineering and Physical Sciences Research Council] at the University of Southampton in the UK by a group of students. Besides this particular plane, they concentrate their efforts on building autonomous drones under 20 Kilograms. Using a 3D sintering process with this design allowed them to make this plane how they wanted, regardless of the ease of machining the parts.

This group has several videos of their planes on their website to download, but check after the break for an embedded video of the [Newscientist] piece about their project. Continue reading “A 3D Printed Aerial Drone” →

AM Singer: A Tiny AM Transmitter

July 30, 2011 by Jeremy Cook 32 Comments

[Simon Orr] wrote in to tell us about his AM transmitter prototype that he plans to put into production in a few months. The build is based on an “Easy AM Transmitter” featured in this Instructables article.

Interestingly enough, this device is capable of transmitting in the 100KHz to 480KHz frequencies. The AM band goes from 520 KHz to 1610KHz, so in order to hear this signal, one must actually tune the radio to twice the emitted frequency. This allows one to tune into the harmonic frequency and receive a signal in this range.

Using the harmonic frequency to transmit is an interesting concept by itself. Additionally, the idea that one could build this device with or without the kit in the future should appeal to experienced hackers and those just starting out alike. Check out the “AM Singer” prototype video after the break. Continue reading “AM Singer: A Tiny AM Transmitter” →

A Pill Reminder Box To Be Proud Of

July 29, 2011 by Jeremy Cook 37 Comments

Not satisfied with the traditional daily pill boxes, [Ryan] set out to build his own. According to his article, these particular pills had to be taken every three days, and he wanted a solution that required “zero effort.” Although one might question whether his solution actually took this amount of effort, the build came out very well.

The result is a box that reminds one to take a pill from one or two bottles using a blinking LED. When the pill bottle is picked up, consumption is assumed and the timer is reset. The main components consist of an Arduino, real time clock, and a battery backup. Additionally, two picture frames are used to form the project enclosure along with some LEDs and other assorted hardware to finish everything.

This project combines some basic electronics hacking and programming with a very nice looking cover. The results are a very clean looking build with a good write up. For another example of a well finished project with great pictures, check out this N64 portable build.

A Professional Looking N64 Portable Build

July 28, 2011 by Jeremy Cook 36 Comments

Although Hack A Day is no stranger to console conversions, this portable N64 build is worthy of note. The article itself is in Spanish, but for those that don’t speak the language, the steps and components necessary are well documented in pictures. There’s even a video of the finished product after the break.

What is especially interesting about this project is the professional looking build quality of the finished product. One might think it’s a custom injection molding job or possibly 3D printed, but everything is done with only glue, filler, and paint. A controller and console is hacked up to provide the raw materials for this build. An expansion pack is even attached to this console for good measure.

Power is provided by a 6800mA battery, and the console features a generous 7 inch display. A good wiring schematic is also provided in this article, so maybe it will inspire other quality console hacking in the future. Continue reading “A Professional Looking N64 Portable Build” →

The Isostick

July 26, 2011 by Jeremy Cook 93 Comments

The Isostick, a Kickstarter project now in development, is meant to emulate an optical drive in the form of a USB stick. Although there is nothing new with putting an iso file (optical disk image) on a USB stick, what is unique about this drive is that it fully emulates a drive without actually having to worry about drivers or extra programs.

When plugged in, a computer sees a flash drive and a virtual optical drive. An excellent feature is that this disk can store multiple “iso” files and select them with a built in utility program. This could be invaluable for a technician or hacker since more than one CD or DVD is often needed to complete a task.

If fully developed, one could expect to attach this “drive” to your keychain and not have to worry about lugging an optical disk around anymore. Also, the activity light is programmable, which is a nice bonus.

All About Accelerometers

July 24, 2011 by Jeremy Cook 6 Comments

If you’ve ever wondered about the use of or theory behind or the use of accelerometers, this tutorial by Love Electronics is a very good resource. In this article, Love takes one through how to hook up an ADXL345 accelerometer and use it with a Netduino processor. Before the subject of hooking everything up is broached, a very good discussion is given on the general theory and operation of accelerometers.

Information is given about installing all the required software and libraries. Additionally, a mini tutorial about writing a “hello” application using the .NET framework is given. Finally, the application gives the [Windows Presentation Foundation] tools necessary to visualize the raw data that the Netduino produces.

One could really start using this processor and accelerometer from scratch with this tutorial and some basic electronics knowledge. This could add a great new feature to your next robot or allow measurement that couldn’t be done with simpler sensors.

Sandia Labs “Hopper” Robot

July 22, 2011 by Jeremy Cook 29 Comments

Made by Boston Dynamics under contract from Sandia Labs, this “hopper” is quite incredible as you can see in the video after the break. Boston Dynamics is no stranger to great robotics designs, including the well known “Big Dog” four-legged robot. This robot, although possibly less advanced, has a very unique trick up it’s sleve.

This robot’s distinguishing feature is that it can navigate autonomously not only with wheels, but also with a powerful single leg that allows it to jump over obstacles of up to 25 feet. Although envisioned to “deliver a payload” in an urban environment, one could imagine a terrifying horde of these ‘bots jumping into action armed with bombs or other weapons.

According to Sandia’s website is that this form of locomotion has been “shown to be five times more efficient than hovering” when trying to get around obstacles under 10 meters. Technical challenges that have been overcome include managing the shock of landing and producing a leg powerful enough to jump to this height. Continue reading “Sandia Labs “Hopper” Robot” →