3D Printed Greeting Cards

December 20, 2016 by Lewin Day 8 Comments

T’is the season to hack, and the maker brigade won’t disappoint — there’s no better way to crank out a few cute holiday tchotchkes than to fire up the 3D printer. [Niklas Roy] has released gDraw, a software package that creates G-code to print out 2D drawings on your 3D printer.

The interface is simple, allowing the quick and easy creation of basic vector drawings. The program then converts the paths in the drawing to a G-code representation that your printer follows to squirt them out in plastic. Think of it as the 3D printed equivalent of the “Stroke Path” tool in Photoshop.

[Niklas] chose to demonstrate the software by creating some interesting greeting cards that Big Christmas is sure to rip off next year and sell for $30 a pop. The printed plastic drawings give a fun 3D effect to the cards, and we’d love to see more examples of art created with this technique. The software was designed to work with the Ultimaker 2, but with tweaks, it should be able to generate code for other printers, too.

We’ve seen plenty of great festive hacks over the years — like this awesome laser projection setup.

Hedgefund Startup Powered By Crowdsourced Code

December 19, 2016 by Lewin Day 17 Comments

In the financial sector, everyone is looking for a new way to get ahead. Since the invention of the personal computer, and perhaps even before, large financial institutions have been using software to guide all manner of investment decisions. The turn of the century saw the rise of High Frequency Trading, or HFT, in which highly optimized bots make millions of split-second transactions a day.

Recently, [Wired] reported on Numerai — a hedge fund founded on big data and crowdsourcing principles. The basic premise is thus — Numerai takes its transaction data, encrypts it in a manner that hides its true nature from competitors but remains computable, and shares it with anyone who cares to look. Data scientists then crunch the numbers and suggest potential trading algorithms, and those whose algorithms succeed are rewarded with cold, hard Bitcoin.

Continue reading “Hedgefund Startup Powered By Crowdsourced Code” →

Apple II Web Server Written In BASIC

December 17, 2016 by Lewin Day 17 Comments

The Apple II was the machine that many say launched Apple as a company. As with many popular computers of the 1980s, the Apple II maintains a steady following to this day who continue to develop new hardware and software to keep the platform alive.

[deater] had scored an Uthernet II Ethernet interface for his Apple IIe, based off the venerable W5100 chipset. He decided to have some fun and wrote a webserver for the Apple II in BASIC. The program sets up the Ethernet card with a series of PEEKs and POKEs, and then listens out for incoming packets before responding with the requisite data loaded from floppy disk.

The server can deal with HTML, text, and even JPEG and PNG images. It’s even compliant with RFC 2324. It does suffer from some limitations however — the disk format used can only hold 140 kB, it can only serve an 8kB file at a time, and due to using a lot of string manipulation in the code, is painstakingly slow.

Before you get too excited, the machine is running on a local network only, so you can’t check it out from here. However, [deater] has kindly released the source code if you wish to run it for yourself.

If you’re thirsty for more 8-bit action, check out this Apple II playing animated GIFs.

Retrotechtacular: The Aerolux Light Corporation

December 16, 2016 by Lewin Day 38 Comments

The humble incandescent lightbulb is an invention just about anyone born in the 20th Century is more than familiar with. But it’s not the be all and end all of lighting technology – there are neon lights, compact fluorescent bulbs, and even LEDs are finally being adopted for interior lighting. But with the endless march forward, there are vintage throwbacks to the past – how many hipster cafes have you been to lately with great big industrial-looking filament bulbs hanging from the ceiling?

Even when switched off, they have a striking appearance.

However, that’s not all history has to give us. These gas discharge bulbs from yesteryear are absolute works of art.

The bulbs contain delicate floral sculptures in metal, coated with phosphor, and the bulbs are filled with neon or argon gas. Applying mains voltage to the electrodes inside the bulb causes the phospor to fluoresce, creating a glowing flower that is hauntingly beautiful.

These bulbs were manufactured by the Aerolux Light Company, from the 1930s to the 1970s. Once upon a time, they could be had for as little as 20 cents a bulb – nowadays you’re likely to pay over $50 on eBay or Etsy. The bulbs work by the glow discharge effect, not at all dissimilar to garden variety neon lamps.

While it’s not easy, it is possible to make your own vacuum tubes. Maybe it’s time to order some phospor powder and a tank of neon and get to work? Be sure to document your attempt on Hackaday.io.

Thanks to [Itay Ramot] for the tip!

Rotary Telephone Becomes Stylish Lamp

December 14, 2016 by Lewin Day 19 Comments

The vintage aesthetic is more popular than ever, and while things like rotary phones aren’t particularly useful anymore, there’s a lot of fun to be had using them in new and inventive ways. For this project, [Sander] built an attractive table lamp out of a Siemens rotary phone.

Switched off, the lamp appears to be nothing more than a phone with its handset floating in midair. However turn the dial, and LEDs mounted in the receiver begin to glow. Taking things a step further as good hackers do, [Sander] used a motorised potentiometer to control the LED brightness with a NodeMCU board featuring the ESP8266. This allows the LEDs to be dimmed either by hand, or by a smartphone connected over WiFi, without the dial getting out of sync.

By using a dual H-bridge setup, the NodeMCU is able to both control the motorized pot as well as generate an AC signal to activate the original bell in the phone, which adds a whole lot of nostalgia points. Fitting the motorized pot into the phone did lend some challenges but that didn’t slow [Sander] down – they simply used a cheap universal joint to allow the motor to connect to the rotary dial off-axis. A great trick to keep in your back pocket.

For the haunting floating effect, [Sander] used a meter of 4 mm brass rod, bending it into shape to hold up the handset. This was used as a ground, and along with a couple of extra wires for power, was covered in a black textile sheath recovered from another electrical cable. [Sander] tells us it wasn’t the easiest thing to pull off, but we definitely agree that the effect is totally worth it.

Thirsty for more vintage ephemera? Check out this rotary phone that runs on GSM. Video below the break.

Continue reading “Rotary Telephone Becomes Stylish Lamp” →

Jumper Cables Block Trains

December 14, 2016 by Lewin Day 143 Comments

Standing Rock, North Dakota has been the site of a major protest this year against the Dakota Access Pipeline project. Protesters have sought to delay the pipeline’s progress by a wide variety of means, and both sides in the conflict have been accused of a variety of misdeeds.

An anonymous group supporting the protesters has released a video describing how they stop trains without the use of physical barricades. The video begins with police removing automobiles used to block the tracks and escorting trains through level crossings, showing how these traditional methods have been ineffective.

The video then goes on to outline what is described as a “sneaky” way of halting trains. Most railroads use what is known as a track circuit — a current run through the rails of the track detects when a train passes over it by the axles completing an electrical circuit between the two. By using a standard automotive jumper cable to connect the two rails together instead, the circuit is completed and falsely indicates to the railway signalling system that a train is present on the track in question. Due to the safety-critical nature of the railway, no trains can be run on the track until the short circuit is removed, else there is a great risk of collisions between trains on the network.

Intended as a practical guide, strategies to maximize disruption are outlined, such as hiding the cables under snow and painting them in black to evade detection as long as possible. Instructions on how to best make a solid connection to the rails are also shared.

It goes without saying that interfering with major infrastructure is risky, dangerous, and highly illegal. Protesters have already been arrested for physically blocking trains. Perpetrators of this method will surely be arrested if caught, and circumventing the technology could easily result in harsher charges associated with electronic security and safety systems. This is sabotage (deliberately obstructing) and undermines the validity of peaceful protest.

This shows how ingenuity is often spawned by turmoil and frustration. Reflect on human nature, and catch the video below the break.

Continue reading “Jumper Cables Block Trains” →

Pioneer AVIC Infotainment Units Hacked To Load Custom ROMs

December 13, 2016 by Lewin Day 23 Comments

Pioneer’s flagship AVIC line of in-car multimedia systems is compatible with both Android Auto and Apple Car Play, and offers all manner of multimedia features to the driver of today. What’s more, these in-dash wonders have spawned their own community, dedicated to hacking the units. The ultimate infotainment hack is to develop custom ROMs for these devices.

What this means is that owners of Pioneer AVIC units will eventually be able to flash a custom ROM onto their in-car device, allowing it to operate more like any other generic Android tablet on the market. The potential is there for installing custom applications, extra hardware (such as OBD II readers), or pretty much anything else you can do with an Android device.

The hack involves a whole lot of delicate steps, beginning with using a USB stick with a special image to boot the device into a test mode. This allows the internal SD card to be backed up, then overwritten with a new image itself.

Mostly, the hack has been used to allow map files to be updated on the internal SD card — inability to update maps has been a long festering thorn in the side of in-dash navigation systems. Users have been customizing this to suit their requirements, also adding speed camera locations and other features. But overall this hack is a great example of hacking something to get full control over the things you own. At the least, this will allow drivers to ditch the phones suction-cupped to the windshield and run common apps like Waze, Uber, and Lyft directly on the infotainment screen (assuming you can rig up an Internet connection).

Check out another great Android ROM hack — using a cheap old smartphone as a low-cost ARM platform.