Head Bangers Beware: Motion Sensing Headphones

September 14, 2009 by Mike Szczys 9 Comments

tiltphones

The iPhone doesn’t have the market cornered on the use of accelerometers. The tiltphone project incorporates a three axis accelerometer into a set of headphones transforming them into a remote control for an iPod. A PIC16F690 reads in data from the analog sensor, translates specific movements into commands, and like the Arduino iPod Remote from last week, relays them to an iPod via the Apple Accessory Protocol. A quick nod left or right skips tracks, holding a sideways nod controls the volume, and setting the headphones down pauses.

This project is a bit older but we’re glad [anon] tipped us off as we hadn’t seen it before. There doesn’t seem to be any code or schematics available but because the Apple Accessory Protocol is known, it’s only a matter of working out how to interpret the sensor data. There is video after the break and if you pull off this hack yourself be sure to send in details for a followup.

Continue reading “Head Bangers Beware: Motion Sensing Headphones” →

Beer Brewer’s Temperature Controller

September 13, 2009 by Mike Szczys 12 Comments

freezer_temperature_controller

Steady fermentation temperatures, usually at about 65 degrees Fahrenheit, are an important part of brewing beer. Because of this, the wort (unfermented beer) is often temperature controlled during fermentation. [android] needed a temperature controller for fermenting beer in a chest freezer. Much like the energy efficient fridge hack from last month, the chest freezer is switched on and off to achieve the desired temperature. Instead of buying a controller, [android] built around an existing design. His project uses a solid state relay to switch an outlet on and off.

The temperature is controlled by a home thermostat. He removed the thermistor from the unit and extended it with 24 gauge wire so that it can go inside of the chest freezer. Utilizing a junction box, the freezer is plugged into one switched outlet and controlled by the thermostat via the relay. The other outlet is unswitched and provides DC power for the relay using a wall wort transformer. Although this thermostat cannot be set cold enough for lagering, it is perfect for keeping kegs at the correct beer serving temperatures when not being used for fermentation.

How To Build A Life-sized Electronic Game

September 12, 2009 by Mike Szczys 9 Comments

life_size_light_games

We’re very impressed with [Steve’s] Electronic Snowball Fight game. It consists of two life-sized players standing opposite of each other. Each can throw a snowball or duck, the object is to hit the other person and not get hit yourself. He’s utilized a lot of good building techniques that could be easily adapted to other types of game play. Continue reading “How To Build A Life-sized Electronic Game” →

Tube Amplifier In A PSU

September 12, 2009 by Mike Szczys 17 Comments

tube_amp_in_psu

[Niclas] sent us his home made tube amplifier. For the case he used a computer power supply unit, took out the guts and replaced them with the amplifier board. He based this build off of an existing design but took a more minimalist approach. The wooden face plate has an on/off switch, an audio jack, and volume control. Apparently, the tubes are floating loose inside of the case. We’d recommend a more secure mounting method for these delicate parts.

CableCard Card Tuners On The Way

September 11, 2009 by Mike Szczys 35 Comments

cablecard

We were momentarily excited when we heard that CableCARD compatible tuners will be available for purchase by the end of the year. A card like this would allow you to hook up your digital cable to your computer and record programs natively. This has been possible for a long time with analog cable and PVR software such as MythTV. Up to this point, recording digital cable has required a dedicated cable box and workarounds to allow the computer to change channels.

Wait a minute though, the announcement was made by Microsoft? Indeed. Microsoft has been making a big push into the home theater PC market with Media Center. Redmond’s PVR offering is also limited to recording analog television;opening up digital would expand the marketplace for them. But here’s where it gets hairy: if you read the Microsoft announcement, TV shows flagged as CF (copy freely) are the only ones that can be recorded.

So, if we have this right: you shell out money for a new tuner then you pay more for the rental of the CableCARD. Both of these expenditures are on top of a digital cable subscription. And yet you can only record shows marked with a “Copy Freely” flag. Who makes the decision on which shows we can pay to record?

AVR Controlled Rubik’s Cube Solver

September 11, 2009 by Mike Szczys 16 Comments

[youtube=http://www.youtube.com/watch?v=ThMd9YR1MAg]

[Andrius] just sent in his robot Rubik’s cube solver. It isn’t as fast as the solver we saw last year but it also doesn’t require as many parts either. This project utilizes two claws, each actuated by just two servo motors. The thinking is done by a PC which calculates the necessary moves to solve the cube. Each instruction is then passed via USB to the AVR ATmega16 microcontroller that is responsible for the servo operation.

Right now it looks like the colors for each starting face have to be entered manually before a solution is calculated. We think [Andrius] is probably planning to upgrade this with the next generation of his software as he already has a webcam setup for this type of analysis.

Exoskeleton Rental Now Available

September 11, 2009 by Mike Szczys 31 Comments

[youtube=http://www.youtube.com/watch?v=B_k30yeCk4c]

The HAL two-leg exoskeleton is now available for rent in Tokyo for $2300 per month. We saw the HAL in our power suit roundup from last year. There is footage of this lower-extremity suit demonstrated by three people. The video is a bit creepy because the they are apparently just out for a stroll in the city.

We really do want to see this succeed. Every time another advancement in exoskeletons comes around we glimpse the future of mobility and freedom for victims of paralysis. The machine is controlled via an interface that picks up electrical impulses on the surface of the skin. The built in battery provides power for up to five hours of operation before recharging is necessary.

[Thanks David]