Simulate A Better Termination

If you are making certain precision measurements, you know you need to terminate the connections with the right impedance, normally 50 ohms. Proper termination minimizes reflections on the line which can disturb measurements. Some instruments already have 50 ohm terminations, at least optionally. If not, you usually use little connector shells with the right resistor inside. [Joe Smith] decided to see if he could improve on the normal terminations using circuit simulation techniques. You can see a video of the work below.

In the process of testing, he also needs a resistive splitter, and, just like with the terminators, he shows you what’s going on inside. It was easy to compare since he had a scope that could independently set channels to have a 50-ohm termination or a 1 megaohm termination.

Continue reading “Simulate A Better Termination”

Old Prius Gets Upgraded Batteries

So many of the batteries made today are lithium batteries of some sort, from mobile phones, laptops, and drones to electric cars and grid storage solutions. But this technology is relatively new; even as late as the 90s and early 00s the only widely-available batteries for things like power tools or the new hybrid vehicles coming on the market were nickel-metal hydride (NiMH). While it was good for the time, they don’t hold up to all of the advantages lithium has. There’s still plenty of hybrid vehicles on the road using these batteries, so if you’re driving an older Prius and want to give it a modern refresh, there’s a quick option to swap your old batteries.

Despite lithium technology being available for several decades, the switch to lithium for the Toyota Prius wasn’t instant, with many variants still using NiMH batteries as late as the 2020s largely because the NiMH batteries are less expensive and less maintenance-intensive than lithium batteries are. As these batteries lose capacity, the cars are still driveable but the advantages of the hybrid drivetrain won’t be as accessible anymore. The upgrade, from a company called Project Lithium, replaces these batteries with modern lithium technology that can improve the efficiency and performance of these cars even above their original capabilities since lithium batteries have more power density.

With the Toyota Prius being among the most reliable vehicles on the road thanks to the electric motor in the hybrid drivetrain taking a lot of stress off of the internal combustion engine, it’s often worth upgrading these old batteries to modern ones to squeeze every last mile from these workhorses as possible. With many of the replacement processes being almost as simple as lifting out an old battery and placing a new one in, it can be a no-brainer if that’s the only issue with the vehicle otherwise. This is also true of all-electric vehicles as well, although the process to replace the battery can be a little more involved.

Thanks to [JohnU] for the tip!

Hacking An NFC E-Paper Display From Waveshare With Mystery MCU

These days e-paper (eInk) displays are everywhere, with stores being one of the largest users of smaller, monochrome versions of these persistent displays. This has also made them a solid target of hackers who seek to not only reverse-engineer and reuse discarded ones, but also ones sold to consumers, with [Aaron Christophel] recently reverse-engineering and flashing custom firmware (GitHub source) to a Waveshare 2.13″ NFC-Powered E-Paper display.

What’s perhaps most notable is how locked-down and devoid of documentation these devices are. The board [Aaron] looked at did not have any markings on the main IC, and Waveshare did not provide more information other than the Android and iOS apps. This led to some matching of various NFC-enabled MCUs with the pinout, with the Chivotech TN2115S2 rolling out as the most likely candidate. This is an 8 MHz Cortex-M0 MCU with not only NFC, but also an energy harvesting feature (up to 300 mW), which is why this e-paper tag can update the display without external power or a battery.

With the Chivotech datasheet being rather sparse, more reverse-engineering needed to be done, which included dumping the firmware and exploring it with Ghidra. During this, the secret key was discovered to make the Flash writeable along with how to control the peripherals and display. With this knowledge it’s now possible to make this tag display update without being limited by manufacturer-supplied tools and software, making it infinitely more useful.

Continue reading “Hacking An NFC E-Paper Display From Waveshare With Mystery MCU”

Ask Hackaday: What Do You Do When You Can’t Solder?

Ah, soldering. It’s great for sticking surface mount parts to a PCB, and it’s really great for holding component legs in a plated through-hole. It also does a pretty great job of holding two spliced wires together.

With that said, it can be a bit of a fussy process. There are all manner of YouTube videos and image tutorials on the “properest” way to achieve this job. Maybe it’s the classic Lineman’s Splice, maybe it’s some NASA-approved method, or maybe it’s one of those ridiculous ones where you braid all the copper strands together, solder it all up, and then realize you’ve forgotten to put the heat shrink on first.

Sure, soldering’s all well and good. But what about some of the other ways to join a pair of wires?

Continue reading “Ask Hackaday: What Do You Do When You Can’t Solder?”

The Superconference Badge Hack Chat

Join us on Wednesday, December 20 at noon Pacific for the Superconference Badge Hack Chat with Elliot Williams and Voja Antonic!

There’s a lot to get excited about when October rolls around and you know Supercon is right around the corner. Catching up with old friends, making new ones, hanging out in the alley, catching the talks, and of course the food. But at the top of everyone’s list has to be The Badge. Finding out what cool bit of technology is going to be built into the badge and figuring out exactly how you’re going to hack it once you get your greedy mitts on it — now that’s excitement!

join-hack-chatThe 2023 Supercon badge was quite a hit, at least judging by all the cool hacks that people came up with. But what exactly went into getting this badge into everyone’s hands? A lot of work, that’s what, along with a lot of blood, sweat, and tears. And while there was plenty of work to go around and a lot of shoulders to the wheel, a lot of the work fell to Elliot and Voja. They’re going to be hopping into the last Hack Chat of the year to talk all about this amazing badge, from concept to conference, and all the hellish steps in between.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, December 20 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

When Is An Engineer Not An Engineer? When He’s A Canadian Engineer

In medieval Europe, many professions were under the control of guilds. These had a monopoly over that profession in their particular city or state, backed up with all the legal power of the monarch. If you weren’t in the guild you couldn’t practice your craft. Except in a few ossified forms they are a thing of the past, but we have to wonder whether that particular message ever reached Western Canada.

An electoral candidate with an engineering degree who practices what any sane person would call engineering, has been ordered by a judge to cease calling himself an engineer. The heinous crime committed by the candidate, one [David Hilderman], is to not be a member of the guild Association of Professional Engineers and Geoscientists of B.C. We get it that maybe calling a garbage truck driver a waste collection engineer may be stretching it a little, but here in the 21st century we think the Canadian professional body should be ashamed of themselves over this case. Way to encourage people into the engineering profession!

Here at Hackaday, quite a few of us writers are engineers. Stepping outside our normal third person, I, [Jenny List], am among them. My electronic engineering degree may be a little moth-eaten, but I have practiced my craft over several decades without ever being a member of the British IEE. No offence meant to the IEE, but there is very little indeed they have to offer me. If the same is true in Canada to the extent that they have to rely on legal sanctions to protect their membership lists, then we think perhaps the problem is with them rather than Canadian engineers. You have to ask, just how is an engineering graduate who’s not a guild member supposed to describe themselves? Some of us need to know, in case we ever find ourselves on holiday in Canada!

Header: Joe Gratz, CC0.

Renewable Energy: Beyond Electricity

Perhaps the most-cited downside of renewable energy is that wind or sunlight might not always be available when the electrical grid demands it. As they say in the industry, it’s not “dispatchable”. A large enough grid can mitigate this somewhat by moving energy long distances or by using various existing storage methods like pumped storage, but for the time being some amount of dispatchable power generation like nuclear, fossil, or hydro power is often needed to backstop the fundamental nature of nature. As prices for wind and solar drop precipitously, though, the economics of finding other grid storage solutions get better. While the current focus is almost exclusively dedicated to batteries, another way of solving these problems may be using renewables to generate hydrogen both as a fuel and as a means of grid storage. Continue reading “Renewable Energy: Beyond Electricity”