Say Hello To Our Little Friend, The BeagleBone

November 1, 2011 by 57 Comments

Small and more powerful… what more can you want? This is the newest BeagleBoard offering, called the BeagleBone. It’s packed with some pretty intriguing features, but let’s take a tour of the hardware first.

Like its predecessors, the BeagleBone sports an ARM processor. This time around it’s a TI AM3358 ARM Cortex-A8. It will ship with a 2 GB microSD card and has an Ethernet port and USB connection. The dual pin headers on either side of the board are designed to receive ‘Capes’ for expansion. Currently a DVI cape is in the works, with HDMI and others to follow.

Linux is running on board and one of the best features we see in the video after the break is the browser-based programming interface. When connected to a network, the BeagleBone serves HTML5 web pages. One of these is an IDE that lets you write and execute code directly from your browser.

Now, can we finally have our open-hardware set top box (hopefully running XBMC)?? At an MSRP of $89 this should be able to give AppleTV 2 a run for its money as an easy way to get your television some network connectivity. Continue reading “Say Hello To Our Little Friend, The BeagleBone” →

The Rube-Goldberg Of Car Audio

November 1, 2011 by 14 Comments

[Anthony Pray] had his car stereo stolen. When thinking about replacing it he realized the he and his wife never used it for anything other than an Auxiliary connection to play songs from their cellphones. So instead of buying a head unit he pulled an unused home audio amplifier out of a dark corner of his house and wired it to the car speakers. Problem solved, except that the under-dash installation meant the only volume control is on the phone playing the audio. He decided to build a wireless audio controller that would let him send commands to the phone without quite as much distraction from the road.

The device you see above is his creation. What a beauty. But seriously, it’s so random and hacked together how can you not love it? And, it works!

The frame is made from plastic coat hangers, and the wheel is an old RC control knob. There’s even a play/pause feature built from the clicking properties of a retractable ball-point pen. A Cypress PSoC board reads the knob and pen positions, then pushes commands via a Bluetooth module in order to control the phone. He recorded a testing video (after the break) which gives you a better look at the functionality of this setup. Continue reading “The Rube-Goldberg Of Car Audio” →

Amazingly Realistic Skeleton Prop

November 1, 2011 by 5 Comments

[Cjmekeel] spent weeks getting his Halloween display ready this year. The centerpiece of his offering is this full-sized motorized skeleton. But there’s a few other gems that he worked on to compliment it. There’s an old-fashioned radio whose dial moves mysteriously and plays a news flash warning of an escaped mental patient. He also spent a couple of dollars to outfit a crow with some glowing red eyes and a servo motor.

But the creepiness of the skeleton means you might not even notice those other props. He started with a rather boring looking plain plastic head and did some real magic to build up the rotting flesh and gaping wounds. Those penetrating eyes don’t hurt either. The head moves on a few servo motors which use random values and sleep periods for disturbingly jerky movements. Check out the video after the break to get a glimpse at what kept kids away from his house on Halloween.

This is just a build log and unfortunately there’s no post yet showing the finished product. If we can get enough information together we’ll try to run a follow-up.

Continue reading “Amazingly Realistic Skeleton Prop” →

Halloween Hacks: The Headless Dogman

November 1, 2011 by 4 Comments

Halloween Hacks Banner

headless_horseman_dog_costume

Typically, when people hear that you’ve made a Halloween costume for your dog, the statement is met with the eye rolling and polite lies about how cute the outfit is. There are few exceptions to this rule, and [Dino’s] latest creation is one of them. For this week’s entry in his Hack a Week series, he created a “Headless Horseman” costume for his dog [Sophie].

The costume borrows parts from one of his previous hacks, the Hexababy. Reclaiming the dismembered head from the disturbing crawler, [Dino] reattaches it to the doll’s body, just not in the traditional manner. He screws the baby’s head to the arm of the doll after fashioning its outfit from some scrap cloth. The doll’s head retains it’s beady red LED eyes from the previous project, but [Dino] added a tilt switch to the setup so that they light up sporadically as the dog runs about.

Be sure to check out the video below to see the final result of [Dino’s] work. The doll looks great, though it seems that its saddle needs some reinforcement to handle [Sophie’s] bountiful energy stores.

Continue reading “Halloween Hacks: The Headless Dogman” →

Skeleton Does A Looney Tunes Style Song And Dance

November 1, 2011 by 4 Comments

[Kevin Harrington] throws a curve ball with this skeleton in a coffin. Instead of going for the cheap scare, he conjures memories of old cartoons when the bony figure puts on a song and dance. When activated it leans forward to hang out of the coffin donning a tattered tuxedo and top hat. You can hear the servos working as they give jerky yet realistic motion to the tune “Hello! Ma Baby” in the true Michigan J. Frog style. Classic!

He figures it took about $36 in parts to put the skeleton together plus the DyIO module to control it from a PC. Four servos are used in total, connected to the skeleton with some steel cable. Connecting it via a computer makes it a bit easier to synchronize music with motion than just using a microcontroller capable of playing back audio would have been. Code is available from the site linked at the top, and a demo video is embedded after the break.

This would also have been possible by using an Arduino as a DMX controller.

Continue reading “Skeleton Does A Looney Tunes Style Song And Dance” →

LED Sexting Belt Buckle

November 1, 2011 by 11 Comments

For some ungodly reason, [Scott] has a friend that wanted a ‘sexting themed’ Halloween costume. We won’t try to make any presumptions of the creativity or mental stability of [Scott]’s friend, but the SMS scrolling LED belt buckle he came up with is pretty cool.

The belt is based around a $13 scrolling LED belt buckle [Scott] found online. There was a problem with the belt buckle, though. Thirteen dollars means [Scott] didn’t get a whole lot of features with his buckle, so there are only 3 buttons on the entire device: letter up, letter down, and enter. Instead of pressing a button 80 times to get a lowercase ‘z,’ an Arduino was thrown into the mix to take care of all the button pressing.

The Arduino sketch could now input any message into the belt buckle in a matter of seconds. All that was left to do is taking care of the SMS to text part of the build. For this, [Scott] used the Sparkfun USB Host Shield and a custom Android app. Whenever an SMS is received on the phone, the message is sent through the USB shield to the Arduino and output on the belt buckle.

We won’t make any assumptions about the content of the messages during the Halloween party, but at least the video demo of the build is family friendly. Check it out after the break.

Continue reading “LED Sexting Belt Buckle” →

Halloween Hacks: A Radioactive Display With More Trick Than Treat

November 1, 2011 by 11 Comments

Halloween Hacks Banner

radioactive_barrel_display

[Shawn] was looking for a way to shake up his decorations this Halloween and decided to build a new prop for his front yard. He had a pair of old oil barrels in his garage and thought they would look great with a little bit of work.

He bolted the pair of barrels together, then slapped a fresh coat of black paint on them before adding a bright yellow radiation trefoil to each one. One barrel contains a pneumatic piston that opens the lid, revealing a light up pumpkin, a fog machine, and a set of water nozzles that spray the area. The second drum houses an air compressor, a wireless router, and an IP camera for recording the action. A web-enabled Arduino triggers the lid and sprayer, both of which can be controlled from the comfort of his house.

We think it’s a creative use of some old scrap barrels, but we’re hoping he doesn’t plan on wetting trick-or-treaters that pass through, as it seems  like a good way to get your house egged or otherwise vandalized on Halloween. If the water sprayer were perhaps swapped out with some other cool effects, [Shawn] is far less likely to be the target of some angry, wet teenagers.

Be sure to check out the video below to see the display in action.

Continue reading “Halloween Hacks: A Radioactive Display With More Trick Than Treat” →