Hackaday links

801 Articles

Hackaday Links Column Banner

Hackaday Links: February 24, 2019

February 24, 2019 by 20 Comments

Back To The Future Part II, released in 1989, told us the far-off future of 2015 would have flying cars, drones working for national newspapers, and self-lacing sneakers. Our best hope for flying cars is Uber, and that’s going to be hilarious when it fails. (Note to Uber: buy KSMO, Santa Monica airport, as an air taxi hub because that’s the most hilarious of all possible realities.) National newspapers — heck, even newspapers — don’t exist anymore. Self-lacing sneakers? Nike’s self-lacing sneakers brick themselves with a firmware update. Don’t worry, it’s only the left shoe.

HackSpace magazine Vol. 16 is out, and there’s a few pages dedicated to Tindie from the person who runs it, our fabulous [Jasmine]. There’s some good tips in here for Tindie sellers — especially shipping — and a good introduction to what Tindie actually is. The three-second elevator pitch of, ‘Etsy but for DIY electronics’ is not in the feature, though.

Is it duct tape or duck tape? That’s a silly question, because it’s ‘duck’ tape, but that’s not important. Gaffer tape is superior. [Ross Lowell], the inventor of gaffer tape, passed away last week at the age of 92.

[Peter Stripol] has a hobby of building ultralights in his basement. Actually, he has a hangar now, so everything’s good. His first two planes flew as Part 103 ultralights, however, there were design problems. [Peter] is using an electric powerplant, with motors and batteries, which is much lighter than a gas-chugging Rotax. However, he was still basing his designs on traditional ultralights. His now third build will be slightly more trimmed down, probably a little bit faster, and might just use 3D-printed control surfaces. Check out the intro to the mk3 airplane here.

[Matthias Wandel], the woodworking Canadian famous for designing the pantorouter, just built a three-legged stool. Sure, that doesn’t sound impressive, but check this out. All the weird mortises were done on the pantorouter, and there are some weird mortises here.

You’re only cool if you got chainz, so here’s some PCB chainz. This was done by [@jeffwurz] with OSHPark PCBs. The design, from as far as we can tell, is simple. It’s just a PCB without a soldermask, and a small cutout in one of the links. Assemble it into a chain, and if you’re clever, solder some resistor leads across the gap to make it a bit more solid.

ASMR, or officially, ‘autonomous sensory meridian response’, is the tingling sensation moving down your back induced by specific auditory (or visual) stimuli. That’s the scientific definition. On the Internet, it’s people breathing into microphones and smacking their lips. Yes, there are videos of this. Thousands of them. There are 11-year-old girls raking in the YouTube money posting ASMR videos. It’s weird and gross, and don’t get me started on slime videos. You’ve also got unboxing videos. The Raspberry Pi foundation found a way to combine ASMR with unboxing videos. I gotta respect the hustle here; ASMR and unboxing videos are some of the most popular content available, and the Pi foundation is not only combining the two, but doing so ironically. It’s exactly the content everyone wants to see, and it’ll bring in people who hate ASMR and unboxing videos. Someone over at the Pi foundation really knows what they’re doing here.

Hackaday Links Column Banner

Hackaday Links: February 17, 2019

February 17, 2019 by 43 Comments

There is a population of retrocomputing enthusiasts out there, whose basements, garages, and attics have been taken over by machines of years past. Most of the time, these people concentrate on one make; you’re an Apple guy, or you’re a Commodore guy, or you’re a Ford guy, or you’re a Chevy guy. The weirdos drive around with an MSX in the trunk of an RX7. This is the auction for nobody. NASA’s JPL Lab is getting rid of several tons of computer equipment, all from various manufacturers, and not very ‘vintage’ at all. Check out the list. There are CRT monitors from 2003, which means they’re great monitors that weigh as much as a person. There’s a lot of Sun equipment. If you’ve ever felt like cleaning up a whole bunch of trash for JPL, this is your chance. Grab me one of those sweet CRTs, though.

Last week, we published something on the ‘impossible’ tech behind SpaceX’s new engine. It was reasonably popular — actually significantly popular — and got picked up on Hacker News and one of the Elon-worshiping subreddits. Open that link in one tab. Now, open this link in another. Read along as a computer voice reads Hackaday words, all while soaking up YouTube ad revenue. What is our recourse? Does this constitute copyright infringement? I dunno; we don’t monetize videos on YouTube. Thanks to [MSeifert] for finding this.

Wanna see something funny? Check out the people in the comments below who are angry at a random YouTuber stealing Hackaday content, while they have an ad blocker on.

Teenage Engineering’s OP-1 is back in production. What is it and why does it matter? The OP-1 is a new class of synthesizer and sampler that kinda, sorta looks like an 80s Casio keyboard, but packed to the gills with audio capability. At one point, you could pick one of these up for $800. Now, prices are at about $1300, simply because production stopped for a while (for retooling, we’re guessing) and the rumor mill started spinning. The OP-1 is now back in production with a price tag of $1300. Wait. What? Yes, it’s another case study in marketing: the best way to find where the supply and demand curves cross is to stop production for a while, wait for the used resellers to do their thing, and then start production again with a new price tag that people are willing to pay. This is Galaxy Brain-level business management, people.

What made nerds angry this week? Before we get to that, we’re gonna have to back track a bit. In 2016, Motherboard published a piece that said PC Gaming Is Still Way Too Hard, because you have to build a PC. Those of us in the know realize that building a PC is as simple as buying parts and snapping them together like an expensive Lego set. It’s no big deal. A tech blog, named Motherboard, said building a PC was too hard. It isn’t even a crack at the author of the piece at this point: this is editorial decay.

And here we are today. This week, the Internet reacted to a video from The Verge on how to build a PC. The original video has been taken down, but the reaction videos are still up: here’s a good one, and here’s another. Now, there’s a lot wrong with the Verge video. They suggest using a Swiss army knife for the assembly, hopefully one with a Philips head screwdriver. Philips head screwdrivers still exist, by the way. Dual channel RAM was completely ignored, and way too much thermal compound was applied to the CPU. The cable management was a complete joke. Basically, a dozen people at The Verge don’t know how to build a PC. Are the criticisms of incompetence fair? Is this like saying [Doug DeMuro]’s car reviews are invalid because he can’t build a transmission or engine, from scratch, starting from a block of steel? Ehhh… we’re pretty sure [Doug] can change his own oil, at least. And he knows to use a screwdriver, instead of a Swiss army knife with a Philips head. In any event, here’s how you build a PC.

Hackaday writers to be replaced with AI. Thank you [Tegwyn] for the headline. OpenAI, a Musk and Theil-backed startup, is pitching a machine learning application that is aimed at replacing journalists. There’s a lot to unpack here, but first off: this already exists. There are companies that sell articles to outlets, and these articles are produced by ‘AI’. These articles are mostly in the sports pages. Sports recaps are a great application for ML and natural language processing; the raw data (the sports scores) are already classified, and you’re not looking for Pulitzer material in the sports pages anyway. China has AI news anchors, but Japan has Miku and artificial pop stars. Is this the beginning of the end of journalism as a profession, with all the work being taken over by machine learning algorithms? By vocation, I’m obligated to say no, but I have a different take on it. Humans can write better than AI, and the good ones are nearly as fast. Whether or not the readers care if a story is accurate or well-written is another story entirely. It will be market forces that determine if AI journalists take over, and if you haven’t been paying attention, no one cares if a news story is accurate or well written, only if it caters to their preexisting biases and tickles their confirmation bias.

Of course, you, dear reader, are too smart to be duped by such a simplistic view of media engagement. You’re better than that. You’re better than most people, in fact. You’re smart enough to see that most media is just placating your own ego and capitalizing on confirmation bias. That’s why you, dear reader, are the best audience. Please like, share, and subscribe for more of the best journalism on the planet.

Hackaday Links Column Banner

Hackaday Links: February 10, 2019

February 10, 2019 by 20 Comments

Last month was NAMM, the National Association of Musical Something that begins with ‘M’, which means we’re synthed and guitarded out for the year. The synth news? Behringer are making cheap reproductions and clones of vintage gear. There’s something you need to know about vintage gear: more than half of everything produced today has a Roland 808 or 909 drum machine (or sample), a 303 bass synth, or a 101 mono synth in it. Put an 808, 909, 303, and 101 on the same table, connected to a mixer, and you can make most of the electronic music from the ’80s and ’90s. And Behringer is cloning these synths. Neat times. But there’s a problem: Roland is trademarking these drum machines and synths, with trademark filings in the US and Germany. These are ‘trade dress’, or basically the beautiful red, orange, yellow, and white buttons of the 808 and the digital cyber silver plastic aesthetic of the 303, but there you go. It’s round one in the Roland v. Behringer match, may the first person to give me an 808, 909, 303, and 101 for a thousand dollars win.

Synths? Sure thing. Here’s a stash of New Old Stock 8580 SID chips, the ‘synth on a chip’ found in the Commodore 64. The price? $50. [ben] bought one of these, and the card that came with it said,  “We purchased these chips in 2006 and they’ve been stored in our climate-controlled storage area ever since. Even still, we found a handful of them that didn’t pass testing. Treat them with care!” Yes, a bunch of SID chips for sale is noteworthy, but at $50 a piece for 1980s technology, can someone explain why a chip fab isn’t cranking these things out? If there’s one ancient piece of silicon where the demand meets what it would cost to spin up the silicon line, the SID is it. Where are the modern reproductions?

Excited about making an electronic badge this year? Seeed is offering badge sponsorships for 2019, with an offer of a 5% discount on PCBA, and a 10% discount if you put the Seeed logo on the board. I might be a little biased, but Seeed is a place where you can just ask, “hey, you guys do clear soldermask?” and they find a way to do it.

The best way to tell if someone is rich isn’t by seeing if they have an i8 parked outside their mansion, or just a piece of junk with an M badge. It isn’t whether or not their filet mignon is wagyu or just Kobe, and it isn’t if they’re cruising the skies in a G650 or just puttering around in a Cessna Citation. No, the best way to tell if someone is rich is to notice their AirPods. Yes, Apple’s wireless headphones (which are actually pretty good!) are the best foundation of a class division these days. The best class signal since private railroad cars now has a problem: people are printing their own AirPods. [Brady32] over on Thingiverse has modeled AirPods, and now the design is being given away for free. The horror. Now anyone can print out their own little bits of white plastic, stick them in their ears, and tell the world, ‘I’m better than you. Don’t bother talking back, because I obviously can’t hear you.’

Raspberry Pi has a store! Yes, everyone’s favorite single board computer now has an ‘experimental space’ in Cambridge’s Grand Arcade. The Beeb is saying this store is ‘bucking the retail trend’, yes, but any retail trend doesn’t really apply here; brands have storefronts, and it’s not about revenue per square foot. Makerbot had a store, and it wasn’t about selling printers. Microsoft has stores. Sony built a mall to advertise the original PlayStation. While the Raspberry Pi brick and mortar store will probably never make any money, it is an indication the Raspberry Pi foundation has built a valuable brand worthy of celebration. Here’s some pics of the store itself.

Did you know Hackaday has a retro edition? It’s true! retro.hackaday.com is a lo-fi version of Hackaday without CSS or Javascript or any other cruft. It’s hand-written HTML (assembled by a script) of the first ten thousand or so Hackaday posts. The idea is that old computers could load the retro site, just to prove they could. [Matthias Koch] has an Atari PC3 — Atari’s PC compatible with an 8088 running at 8Mhz, 640k of RAM and a 20 MB hard drive — and got this thing to pull up the retro site. Good work!

What is the current state of 3D printing? What is the current state of 3D printing videos on YouTube? Oh boy we’re going to find out. [Potent Printables] did an ‘analysis’ of 3D printing videos published to YouTube, and found the category riddled with ‘clickbait’, without giving an operational definition of what ‘clickbait’ actually is, or how it’s different from any other content (because who would make a video that doesn’t have the purpose of attracting viewers) Anyway, there’s a problem with the YouTube algorithm, and 3D printing blogs are copying it, filling the entire hobby with disillusioned beginners, or something. After defining ‘The Most Viewed’ as not being a news or documentary footage (okay, that’s fair), having at least three printing videos, not clickbait, and gives the designer proper attribution, [Potent Printables] found a list filled with [Maker’s Muse], [3D Print Guy] and other channels who do 3D printing work, but don’t put 3D printing in the title. This is great; 3D printing isn’t a fascinating new technology that’s the first step towards Star Trek replicators; we’ve slid down the trough of disillusionment and now 3D printers are just tools. It’s great, and in 2018 things are as they should be.

Hackaday Links Column Banner

Hackaday Links: February 3, 2019

February 3, 2019 by 20 Comments

Once technology that was only available to expensive design teams, and high-end engineering work, 3D printers are now readily available to anyone. Designing a physical prototype with a 3D printer is now something anyone can afford. Did I say anyone? Yes, anyone, even the people trying to build perpetual motion machines. Here’s one on Kickstarter powered by physics. It’s repelling magnets turning wheels.

The study and development of Artificial Intelligence began in the late 1950s and early 1960s. There were conferences, there were talks, colloquium, journals, the works. It was the beginning of a golden age. That came to a screeching halt sometime around 1985. Now, we’re in a new golden age of AI. There’s even a conference. It’s being hosted by [Jeff Bezos], as the alternative, public version of the MARS (for Machine Learning, Automation, Robotics, and Space) conference. Read that link. The phrase, ‘the Bilderberg conference of California’ is in there.

A new Project Binky? Can it be true? Yes, it’s episode 22. The center console is in, the dash is in, and the doors look somewhat finished. What’s the deal this time? A bumpin’ stereo. Wiring! Milliput! It’s English blokes in a shed doing fabrication, your favorite genre of video.

Aaaay, wait a minute. Have you heard about KiCon? Yes, there will be a KiCad user conference. It’s in Chicago, April 26th and 27th, and it’s all about KiCad scripts, settings, tools, techniques, and triumphs. There’s a call for talks, although you shouldn’t try to submit a workshop discussing the difference between ‘Kai-Cad’ and ‘Key-Cad’. That workshop has already been rejected.

Have a 25 meter satellite dish lying around in your backyard? Of course you do. Well, you can hunt for satellites with that thing and a USB TV tuner. The SatNOGS team has been working with a (radio) observatory in the Netherlands, and they’re getting radio signals from overhead satellites. Not bad, and there are, actually, a surprising number of unused large radio dishes out there. Luckily, they’re mostly historic sites.

Hackaday Links Column Banner

Hackaday Links: January 27, 2019

January 27, 2019 by 15 Comments

Once again, Uber found a company to build their ‘air taxis’. This time it’s Boeing. While there are no details on the Boeing bird, I’m going to propose again that Uber buy the Santa Monica airport as a hub for their air taxi program; SMO is going to be shut down anyway, and this is the funniest reality that can come from the idea of an ‘air taxi’ program.

According to ancient astronaut theorists, one of the bigger problems with full-time tech YouTubers (think Dave and Fran here) is the insistence that YouTube suggests conspiracy theory videos as a related video. If you do a video teardown on Apollo flight hardware, you’re going to fall into the same category as people who believe the moon is hollow, people who believe the moon landing was faked, and recently, flat-earthers. This is a ‘bad move’ by YouTube because the Venn diagram of people who want to watch conspiracy videos and people who want to watch teardowns is two circles. It makes community engineering hard, and you get a lot of idiots on YouTube comments. YouTube is now changing the recommendation algorithm. There are other reasons YouTube is doing this, specifically relating to videos that aren’t about weird electronics, but we’re not going to talk about that here, thx.

This week was Winter NAMM, the National Association of… music, something something. That means you can go to Anaheim and check out all the musical instrument related stuff that will be released this year. Think of it as CES, only you don’t get the flu and want to murder everyone, and it’s about guitars and synths instead of Alexas duct taped to Roombas. Here’s what it was like last year, with the tl;dr being a wall of cabs, Euroracks everywhere, and the best way to get started in the industry is to buy some old trademarks, not by actually designing something new. Speaking of, here are some Kay reissues.

So, what’s cool at NAMM this year? Let’s do guitars first. Gibson’s 2019 lineup is not dumb, a reversal of the previous twenty years; There’s a Les Paul Standard with humbuckers or P90s, and there’s a TV Junior. Fender? There’s an acoustasonic Tele that was terrible the first time around, and it’s decidedly not terrible. The Electric XII is back, finally, and it’s even cooler than the Electric Six wait never mind it has a 1 11/16th nut. There is no Tele Plus with a Honda Goldwing emblem, but we make do with what we can. The pyramids are upside-down. Buy a dookie pedal.

How about some synths?  Behringer is cranking out another clone, this time an Oberheim OB-Xa. Word on the street is that a 303 is on the horizon, but the vocoder is out now. The Odyssey exists, and the SH-101 clone comes with a handle so you can keytar it.  Guitars with Raspberry Pis? Could it be? Yes, Lucern Custom Instruments is collaborating with Tracktion to put a synth in a guitar. There’s a touchscreen BioTek 2 synth installed below the bridge. It’s like something [Matt Bellamy] would play, but it’s got a Raspberry Pi.

Elektron has a new sampler. Oh my god, the only way to make money in the instrument industry is to buy up trademarks. Well, trademarks and signature amps and guitars. Speaking of, where’s the signature Vangelis synths?

The news that will have the biggest impact a decade from now is the announcement that MIDI 2.0 is getting ready for release. New features include auto-config with DAWs, extended resolution, and expressiveness (to stop the Western hegemony on electronic music), and backward compatibility with MIDI 1.0.

This isn’t explicitly NAMM-related, but Eurorack is now a thing and [Jan] is always coming up with some interesting synths-on-a-chip. This time, it’s a drum machine in a Eurorack format. Is it based on anything? Not really, although it would go well in any Detroit acid track. Check out the video.

Hackaday Links Column Banner

Hackaday Links: January 20, 2019

January 20, 2019 by 18 Comments

Let’s say you’re an infosec company, and you want some free press. How would you do that? The answer is Fortnite. Yes, this is how you hack Fortnite. This is how to hack Fortnite. The phrase ‘how to hack Fortnite’ is a very popular search term, and simply by including that phrase into the opening paragraph of this post guarantees more views. This is how you SEO.

Lasers kill cameras. Someone at CES visited the AEye booth, snapped a picture of an autonomous car at AEye’s booth, and the LIDAR killed the sensor. Every subsequent picture had a purple spot in the same place. While we know lasers can kill camera sensors, and this is a great example of that, this does open the door to a few questions: if autonomous cars have LIDAR and are covered in cameras, what’s going to happen to the cameras in an autonomous car driving beside another autonomous car? Has anyone ever seen more than one Cruise or Waymo car in the same place at the same time? As an aside, AEye’s company website’s URL is aeye.ai, nearly beating penisland.net (they sell pens on Pen Island) as the worst company URL ever.

This is something I’ve been saying for years, but now there’s finally a study backing me up. Lego is a viable investment strategy. An economist at Russia’s Higher School of Economics published a study, collecting the initial sale price of Lego sets from 1987 to 2015. These were then compared to sales of full sets on the secondary market. Returns were anywhere between 10 and 20% per year, which is crazy. Smaller sets (up to about 100 pieces) had higher returns than larger sets. This goes against my previous belief that a Hogwarts Castle, Saturn V, and UCS Falcon-heavy portfolio would outperform a portfolio made of cheap Lego sets. However, this observation could be tied to the fact that smaller sets included minifig-only packaging, and we all know the Lego minifig market is a completely different ball of wax. The Darth Revan minifig, sold as an exclusive for $3.99 just a few years ago, now fetches $35 on Bricklink. Further study is needed, specifically to separate the minifig market from the complete set market, but the evidence is coming in: Lego is a viable investment strategy, even when you include the 1-2% yearly cost of storing the sets.

Relativity Space got a launchpad. Relativity Space is an aerospace startup that’s building a rocket capable of lobbing my car into Low Earth Orbit with a methalox engine. They’re doing it with 3D printing. [Bryce Salmi], one of the hardware engineers at Relativity Space, recently gave a talk at the Hackaday Superconference about printing an entire rocket. The design is ambitious, but if there’s one device that’s perfectly suited for 3D printing, it’s a rocket engine. There are a lot of nonmachinable tubes going everywhere in those things.

Hackaday Links Column Banner

Hackaday Links: CES Is Over

January 13, 2019 by 17 Comments

CES is over, and once again we have proof technology does not improve our lives. Here’s the takeaway from the @internetofshit. There’s a garbage can where you can drop your DNA sample. This is obviously not a Bay Area startup, because they just leave DNA samples on the sidewalk there. The ‘smart cooler’ market is heating up (literally) with a cooler that’s also a grill. Someone duct taped an air filter to a roomba, so your air filter can go to where all the dirty air is in your house. Internet of Rubik’s Cubes. The world’s first autonomous shower made an appearance. Now you can take a shower over the Internet. What a time to be alive.

Need some more bad news from CES? We have more proof the entire tech industry is astonishingly sexist. How so? Well, VR sex simulators can win best of show. That’s a given, obviously. But a ‘smart’ sex toy designed by and for women was selected for a CES 2019 Innovation Award in the Robotics and Drone category. This award was given, then rescinded, by the Consumer Technology Association (CTA) because it was, ‘immoral, obscene, indecent, profane or not in keeping with the CTA’s image’. We presume they mean the latter, but we’re not sure.

Sometimes, though, there are actual engineers behind some of the gadgets on display at CES. Bell (yes, the aerospace company) unveiled the Bell Nexus, a five-seat VTOL ‘taxi’ powered by six ducted fans. These fans are powered by a hybrid electric power system. We assume a turboshaft connected to a generator powering electric motors. Most interestingly, speculation is that this will be the vehicle Uber’s Elevate air taxi program. This initiative by Uber intends to turn a random parking lot in LA into the busiest airport in the world. This is what the official marketing material from Uber says, I am not making this up, and it’s beyond stupid. You know what, just have Uber buy the Santa Monica airport, close it down, and turn it into an air taxi hub. This is the dumbest and funniest possible future imaginable.

Okay, CES is terrible, but here’s something for you. You can get a free ‘maker license’ of Solidworks. Just go here and enter promo code ‘918MAKER’. This info comes from reddit.

The Impossible Project was founded in 2008 as an initiative to remanufacture Polaroid film and refurbish cameras. The project was a rousing success with many supporters. It is a beacon of hope for anyone who wants to keep obsolete formats alive. Now, another format will live on. MacEffects, a company (or eBay store) in Indiana is remanufacturing color ribbons for Apple ImageWriter II printers. The ImageWriter II was the dot-matrix printer in your elementary school’s computer lab if you’re in the Oregon Trail generation, and yes, it could print color pictures. It could print very high-quality color pictures. The problem is getting color ribbons, and now you can get new ones. We’re very interested in seeing the art that can be made with a color ribbon in an ImageWriter, so if you have a portfolio, send it on in. If you have an ImageWriter, try to print something. It’s a serial printer, not a parallel printer.