Apple Remote Arduino Shield

November 3, 2009 by Mike Szczys 27 Comments

arduino-apple-remote-shield

[Computergeek] made an Arduino Shield in order to use it as an Apple remote. We like the construction technique that he used; taking perf-board and soldering the circuit and using stripped wire to interface with the pin sockets on the Arduino. He’s written the code needed to function as an Apple Remote but this shield has a lot more potential. This is an excellent opportunity to delve into the different IR protocols out there and create a universal remote for all of your random devices. We’d also want to give it a try as a TV-B-Gone.

The parts are easy to find or salvage without putting in an order. We’re not certain about his design, he should probably have invited a resistor to the party the two IR LEDs are having.

Augmented Xylophone

November 2, 2009 by Mike Szczys 34 Comments

[Ania’s] been working on extending a xylophone in a project called Multixylophoniomnibus. She’s fitted a piezo sensor on the bottom of each xylophone key, interfacing it with an Arduino. When a mallet hits a key the corresponding box augments the sound in one of several ways. It looks like she’s prototyped a box that twangs a rubber band, one that uses a solenoid to clap mini cymbals together, one that rattles a glass full of beads, another that vibrates a glass full of water, and yet another that rattles a chain.

It’s nice to see how versatile the xylophone is for instrument hacking. Her Flickr set is linked above but we’ve also embedded some prototyping videos after the break.

Continue reading “Augmented Xylophone” →

ArduiNIX: Nixie Shield For Arduino

November 2, 2009 by Mike Szczys 12 Comments

ArduiNIX-nixie-shield

Flock of Butterflies has just published their third post in a series about the ArduiNIX, an Arduino shield that drives Nixie tubes.We’ve featured Nixie tube projects such as a single tube clock, free-formed Nixie circuits, and tubes in a bottle. Now the hurdle of handling high voltage tubes while protecting low voltage logic circuitry has been taken care of for you. The shield can be purchased as a kit but the Eagle CAD files are also available, allowing you to etch your own circuit board.

Although this is meant for the Arduino there is nothing to keep you from using it as a driver with any microcontroller. The board listens for 5V logic levels to switch the multiplexed display of up to eight tubes. Get your hands on some Nixies and give this a try yourself.

Another Mini KeepOn?

October 31, 2009 by Caleb Kraft 21 Comments

[flickr video = 4060182274]

[Eustice Scrubb] has posted some videos and pictures of a robotic “eye stalk” that he’s building. It looks like the final version is using 3 servos in an arrangement like tendons through a slinky jr. The ping-pong ball on the top has a BlinkM inside it. You can see a video after the break that shows the three servo tendons in motion. The whole thing is controlled by an Arduino and one of his pictures states that it plays mp3s and has an internal pendulum. None of his pictures seem to implicitly state what it is meant to do though.

Continue reading “Another Mini KeepOn?” →

Time-lapse Courtesy Of Arduino

October 30, 2009 by Mike Szczys 11 Comments

arduino-time-lapse

[Ross] put together a small package for use with time-lapse photography. The Nikon camera he’s using can snap a picture when it receives an IR command. [Ross’] solution connects an IR LED to an Arduino to generate this signal. The delay between frames is set with a potentiometer that is read in through the ADC. This is quite a bit less involved than the last solution we saw.

The unit consisting of an Arduino clone, a 9v battery, and the IR LED on a cable is easy to fit into a camera bag. He’s posted the code and we’ve embedded an example of his work after the break. An enclosure as well as time references around the potentiometer would complete this handy tool.

Continue reading “Time-lapse Courtesy Of Arduino” →

Arduino “python” Integration

October 30, 2009 by Phil Burgess 9 Comments

vivarium

[Cyberspice] informs us she likes snakes. Hey, who doesn’t? She’ll soon be adopting a lovely ball python and wanted to keep close tabs on the sensitive creature’s environment. To that end she assembled a network-enabled vivarium monitoring system based on Adafruit’s Boarduino (a minimalist Arduino clone), a TMP36 analog temperature sensor, Saelig’s WIZ810MJ Ethernet interface, and a common LCD screen. The Arduino rig periodically issues updates to a web server, which can then generate informative graphs using a set of PHP scripts (what, no Python?).

Okay, so we could probably count on one hand the number of readers in need of fancy reptile monitoring and still have fingers left over. There are countless other applications where networked sensor monitoring of this sort is a frequent necessity, so the article could be a good starting point for your own projects. There’s lots of source code to work with, on both the Arduino and web server sides. And the parts list demonstrates serious frugality: the Boarduino, the generic LCD, and especially the Ethernet interface; even with the breadboard adapter, this unit is about half the cost of the usual Arduino Ethernet shield, leaving more funds available for the snake food budget!

Single Servo Robot

October 30, 2009 by Caleb Kraft 10 Comments

[youtube=http://www.youtube.com/watch?v=EFRPZRovn74]

[Guilherme Martins] rose to a challenge to build a robot with a single servo. His robot is a puppet controller, called talkie walkie. In real time, it will move its mouth to the sound of what you are saying. For those really curious, he’s speaking Portuguese and he roughly says “Hi, how’s it going”. He’s using an Arduino with a custom sound sensor, a single servo, a box, and a folder paper mouth.

Building a single servo robot shouldn’t be that much of a challenge, we’ve even seen walking robots with a single motor. There’s this 2 legged crawler, and we recall seeing a 4 legged B.E.A.M. walker with a single servo, but can’t find it right now.

[via RobotsDreams]