Senior Design Project Serves Infinite Drinks

April 26, 2015 by Mike Szczys 6 Comments

If you’re creative, you can make your passion projects count for college credit. Somehow [InfinityTable] managed to use this infinity bartender build called BarT as a senior design project.

There’s a lot going on here, starting with the cabinet which is 30″x30″ and has some custom mirrored glass necessary because of a square cut-out in the middle of the front pane. The two mirrors face each other, with a strip of LEDs in between which accounts for the “infinity” part of the build. This is popular but usually it’s usually just the mirror and lights. In this case that special cut-out is a cubby for a glass. Place it in there and the rest of the build will mix you up a tasty beverage.

There is a second chamber in the enclosure behind the rear mirror. This houses the components that mix up the drinks. Raw materials are dispensed from 1.25L plastic bottles. The extra special part of the build is that since it is a senior project, all the driving circuitry uses roll-your-own boards.

Continue reading “Senior Design Project Serves Infinite Drinks” →

Robottermilk Pancakes

April 23, 2015 by Mike Szczys 7 Comments

With a name like that how could we possibly pass up featuring this one? Truly a hack, this pancake making robot was built in under 24 hours. [Carter Hurd], [Ryan Niemo], and [David Frank] won the 2015 Ohio State University Makethon with the project.

The gantry runs on drawer sliders using belts from a RepRap. The motors themselves are DC with encoders. [Carter] tells us that since most 3D Printers are build on stepper motors this meant they had to scratch-build the control software but luckily were able to reuse PID software for the rest. Get this, the pump driving the pancake batter was pulled from a Keurig and a servo motor is used to kink the tubing, halting the flow. We are amused by the use of a Sriracha bottle as the nozzle.

It wasn’t just the printer being hacked together. The team also built an iPhone app that lets you draw your desired pattern and push it to the machine via WiFi.

Inspired yet? We are! If you’re anywhere near New York City you need to bring this kind of game to our Hackathon on May 2-3. One night, lots of fun, lots of food, and plenty of hardware. What can you accomplish?

Continue reading “Robottermilk Pancakes” →

Building Your Own Mini Fridge?

April 3, 2015 by James Hobson 58 Comments

Ever play with a Peltier plate? They’re these really cool components that kind of look like a ceramic sandwich, and when you put power into them, one side gets hot, and one side gets freezing cold! [Joseph Rautenbach] decided he wanted to try making his own mini fridge out of one — which is typically how most modern mini fridges work these days.

The peltier plate he’s using draws 12v at about 3.5 amps — so about 50W — and if you don’t heat sink it properly you could burn it out in a matter of seconds. Peltier plates only care about the temperature differential between the two sides — if you don’t take the heat away from the hot side, it will soon overheat and destroy itself.

[Joe’s] using a styrofoam cooler for the fridge with a pair of computer heat sinks and fans for the peltier plate, and a temperature PID controller he bought off eBay. The external heat sink sucks away the excess heat generated by the peltier plate, and the internal one helps spread cooled air around the inside of the styrofoam cooler. The PID controller allows him to set a preferred temperature to maintain in the box, which will then control the outputs to keep it that way.

Continue reading “Building Your Own Mini Fridge?” →

Help! There’s An Imp In My Coffee Pot!

March 22, 2015 by James Hobson 20 Comments

Coffee. The lifeblood of our society. The sweet nectar of bean, whose chemical compound makes us feel so, so good. Doesn’t it deserve a place in the Internet of Things? [Matt] and [Don] thought so — so they connected their old coffee pot to their phones.

After receiving their developer version of the Electric Imp board, the two started thinking of small projects to test it out on; ones that might even have a real-world application. Since the Imp is capable of receiving inputs via the web, it’s super easy to write an app to control things — in this case, a coffee pot.

Hardware-wise it was actually pretty simple. The coffee pot control board provides power for the Imp, and the On/Off switch of the coffee maker is wired to one of the Imp’s outputs. One simple app later, and boom we have wireless java capabilities. Heh. Java.

Continue reading “Help! There’s An Imp In My Coffee Pot!” →

Caramelizing Sugar With A Laser

March 4, 2015 by James Hobson 20 Comments

If you happen to have access to a laser cutter, you’re bound to try cutting or engraving something it wasn’t designed for. We know we have. [Bonnie] and her friend [Brenda] decided to try something new — caramelizing sugar with a laser.

At their local hackerspace, NYC Resistor, they brought in some chocolate squares and colored sugar and started tinkering with the laser. It’s a 60W CO2 laser by Epilog. After testing a few different options they ended up with the following setting for optimum sugar caramelizing with only one pass:

Speed 100
Power 30
DPI 300

By spreading a thin layer of sugar over top of the chocolate, you can effectively melt and bond the sugar to the chocolate — we suspect playing with the laser focus will also help you fine tune the process for your own confections.

You could just etch the chocolate with the laser as well — but that’s not quite as cool. Perhaps try to up your sushi game, why not laser engrave seaweed before rolling? Or make the perfect laser-cut gingerbread house thanks to designing it in CAD?

Choctopus Chocolate Printer X8

January 14, 2015 by Matt Freund 14 Comments

Valentine’s Day is about a month away, long enough for everyone to ~~butcher~~ upgrade their 3D printers to squirt out chocolate. Food printing was a hot item at this year’s CES, but it is hardly new. Before many of you were born [Hans] left his job at the Council for Scientific and Industrial Research to produce chocolate out of his garage in South Africa. This one prints 8 at a time!

Many years before he was extruding lawnmowers from raw pellets, [Hans] built the 8-tentacled Choctopus. He gets away with using only one chocolate pump – from some experience, by far the most challenging component – by simply splitting the ooze pipe with three tiers of T intersections. The whole design is actually patented and revolutionary for 19 years ago but to our readers probably unremarkable.

There is a business lesson here too. Once upon a time the Choctopus was a 3D printer but economic constraints have led to him downgrading to 2D. Any 3D requirements are served from an alternate RepRap. The purpose of an 8-armed printer is to mass produce, but for the price, most clients were only interested in a one-off. The products that pay the bills are the much more affordable 2d extrusions in bulk.

Any of our readers looking to ~~impress their date~~ make lots of money next month, consider this the kick in your pants to get started.

Check out these videos of the Choctopus churning out delicious delicatessens.

Continue reading “Choctopus Chocolate Printer X8” →

This Cake Is Not A Lie

December 31, 2014 by James Hobson 8 Comments

Introducing the world’s first(?) edible and interactive RGB matrix cake — the ArCake.

[Treibair], one of our readers from Germany was inspired a few years ago with the LED cake we made here at Hackaday. Ours used angel food cake squares that allowed LED lights to shine through the squares from underneath the cake, where the LEDs are housed in the technologically advanced cake tray. It worked pretty well but we didn’t exactly recommend people to follow in our foodsteps.

That didn’t stop [Treibair] though, and he came up with his own unique twist on the cake! Instead of bothering with various cubes of angel food cake, he had a much more direct method.

It’s easy to do, just follow these steps:

Drill some holes in a cake
Put your jello in that cake
Make her open the box

And that’s the way you do it.

The resultant LED diffusers let lots of light through, while retaining their most important quality — tastiness. All in all, he made 30 jello filled holes which allowed him to place a 5 x 6 LED matrix underneath the cake. Now when he gives the cake to his wife, it will read her a Happy Birthday message, and then allow her to play a Jump’n’Run game using a Wii nunchuck controller!

Continue reading “This Cake Is Not A Lie” →