News

3709 Articles

Black Friday Deals And Contest Giveaways

November 21, 2011 by 7 Comments

Winter is coming, and it’s a great time to start accumulating parts and tools to keep you occupied with projects during the dark and cold days ahead.

Black Friday

We got a tip from Pololu about their planned Black Friday deals, and thought we’d check with some of the other parts suppliers that cater to the hobby market too. Here’s what we found:

  • Adafruit Industries Black Friday – Get 10% off of your purchases made any time on Friday if you use the code ‘BLACK’ (12:00am-11:59pm — we’d guess this is Eastern Time) – UPDATE: Get 10% of Monday 11/28 with the code ‘CYBER’.
  • Pololu Black Friday – many items are available at a great discount plus extra savings using their Black Friday coupons. Sales run midnight on Thursday morning through 11:59pm on Monday night (Pacific Time, 11/24 through 11/28)
  • UPDATE: Sugru – we just got an email about a special offer for this moldable material. Now through December 19th you can get your fourth pack for free using the coupon code: YAYCHRISTMAS

We did hear back from SparkFun. They don’t have a Black Friday deal planned, but they are planning on Free Day 2012 happening some time early in the year! We’ll keep our eyes open for details, but if you hear about it before we do send us a tip.

Make also got back to us. No specific details about Black Friday, but we’re told they have some type of deals in the works.

Digikey and Mouser didn’t get back to us in time for this post.

Laser Cutter Giveaways

Do you want a laser cutter to call your own? Yeah, so do we. If you come up with a really cool project perhaps you can win one. It looks like there’s two contests a contest going on right now that is giving one away to the grand prize winner.

  • Build Lounge is giving away a 40W CO2 Deluxe Hobby Laser Cutter to the best project based on light (community votes).
  • Instructables – Oops…. we waited too long to post about this one as the contest closed on the 14th, sorry. But chances are good this will come around again. For now, you’ll have to be satisfied at viewing the entries that made the finals.

This Giant Hand Made LED Matrix Must Be Ours!

November 20, 2011 by 16 Comments

giant-led-matrix

[Martin] wrote in to share a project his company has been working on for some time, a gigantic 1470 pixel LED wall. The group provides lighting for clubs, parties, etc, and their hand-built LED matrix is always certain to be the hit of the show.

The amazing matrix was designed from the ground up and built by hand in [Martin’s] living room. They designed small 32x32mm “pixel” boards, each of which features 6 PLCC6 RGB LEDs driven by a single WS2801 LED controller. The PCBs were populated by hand and each one was reflowed in a small pizza oven that [Martin] owns. After the pixels were completed, they were attached to aluminum bar and combined to build thirty 70x70cm frames which are connected together to form a giant matrix.

As you can see in the collection of videos below, the display is very impressive. We just hope that they will be compelled to release the schematics for their boards so that we can build one of these in the office.

Continue reading “This Giant Hand Made LED Matrix Must Be Ours!” →

Weekly Roundup 11/19/11

November 19, 2011 by No comments

In case you missed them the first time around, here are our most popular posts from the past week.

Our top contender is a post about a giant snake robot that is modeled after a snake that we know of through fossil records that was up to 50 feet long. This one is pretty interesting.

Next in line is a post about a special setup where things are being projected onto a nearly invisible mist of water that literally makes the images float in midair.

After that we have a post about another creation by [Photonicinduction]. Surprisingly, he isn’t destroying something with this one and it isn’t dangerous. Nevertheless it is still interesting. Check out his home power backup system that also (there is some debate going on with this claim) reduces his electricity bills.

In fourth place we have a post about how to make your own aerogel. For those of you who haven’t seen this stuff in person, it is the least dense solid that exists. You can literally see through it.

Finally, we conclude with one about an animatronic Horus Guard mask. If you are a fan of Stargate, this is one to check out.

Video: Interrupts On The ATmega328p

November 17, 2011 by 1 Comment

This week, we are bringing you the final video in our series where [Jack] uses the 3pi robot as a fancy development board for the ATmega328p processor. Today’s video deals with interrupts. If you have been wanting to have your programs do more than one thing simultaneously, interrupts are the solution. [Jack] discusses various ways that you can use interrupts in your programs and then shows how he created a interrupt routine that drives the 3pi’s beeper. He also shows the routines that enable, disable, and control the interrupt.

Since this is the last post for this series of videos, we are posting the code used for all of the previous videos. Click here to grab a copy.

For our next series of videos, we are going to attempt something more challenging so most likely we will be taking a couple of weeks off to do some development before presenting it here. Stay tuned folks, we’ll be back.

Video is after the break…

In case you missed any of the previous videos, check out these links:

Part 1: Setting up the development environment
Part 2: Basic I/O
Part 3: Pulse Width Modulation
Part 4: Analog to Digital conversion
Part 5: Working with the 3pi’s line sensors

Continue reading “Video: Interrupts On The ATmega328p” →

DIY LED Photography Lights

November 15, 2011 by 11 Comments

led-light-box

[Markus] had been drooling over some LED panels to use as a soft light source for photography, but being a hobbyist, he didn’t want to spend a ton of money to buy them. He figured that he had enough electronics know-how to build his own panels, while saving a boatload of cash in the process.

He hoped to keep the total cost under £100, so along with new items like LED light strips, he would have to use some stuff he had sitting around, like the metal cooking containers that make up the body of the lights. While originally planned for use in a different project, it turns out that the cooking containers were ideal for his lighting setup, since they are both durable and great heatsink material.

The remainder of the build is pretty straightforward. [Markus] used a pre-made LED dimmer to control the panel’s brightness, along with some tinted plexiglas to diffuse the light while bringing the color temperature into a more usable range.

While he missed his £100 mark, the lights look great – we just might have to build a few of them ourselves.

NES Controller Is A Slick Way To Carry Around Your Portable OS

November 13, 2011 by 14 Comments

nes-controller-linux-drive

[Oliver] had an old NES controller laying around, and without any other use for it, he decided to repurpose it as a portable storage device.

He gutted most of the controller, removing the plastic standoffs, leaving the D-pad and remaining buttons intact. He crammed a 32 GB flash drive inside, along with the guts from an SD card reader. Using a Dremel he cut several openings into the controller, one for the flash drive and SD card reader’s USB ports, as well as for the SD card itself. When the physical modifications were finished, he installed a small Linux distro on the flash drive, which can be run by any PC that supports booting from USB.

While some might argue, we think it’s a neat way to reuse an old gaming peripheral that he might have otherwise thrown out. The portable OS is something that would certainly come in handy, though we can’t wait until the Raspberry Pi is finished – it would be awesome to have a complete computer packed in there too.

Lego NXT Creations Are Even Cooler With WiFi On Board

November 12, 2011 by 2 Comments

nxt-wifi

The folks at Dexter Industries have just wrapped up a week of Lego NXT projects, most of which centered on the use of their NXT WiFi sensor. Developed over the last few months, the group has been hard at work refining their design and getting some of the kinks worked out, so now you too can control your NXT creations sans wires.

The demonstrations have covered various topics throughout the week, starting out with a short tutorial on how to use a computer to communicate with the NXT device using the TCP protocol. After taking a look at WiFi power-saving capabilities, they touched on pinging other networked machines as well as querying DNS records from an NXT device. An NXT-based webserver was the next project on the list, as was remote robot control over the Internet. Finally, they wrapped the week up by configuring their Lego robot to send a tweet.

If getting your NXT creations on the move with full-fledged network access is something that sounds interesting, be sure to check out their site for downloads, a WiFi manual, and more.