Who Would Win In A Fight, Robot [Lemmy] Or Robot God?

January 6, 2013 by Brian Benchoff 52 Comments

[youtube=https://www.youtube.com/watch?v=3RBSkq-_St8&w=580]

So this is what happens when a fan of The Rock-afire Explosion grows up. Meet Compressorhead, a musical trio of hydraulic and pneumatic musical mastery.

Compressorhead is a lean band, consisting of only three members. Stickboy, the drummer, is a four-armed beast reminiscent of [General Grievous] that plays a 14-piece Pearl kit with a double bass. His listed influences include [Danny Carey] and the original MPC60.

Fingers is the guitarist and a wonder of mechanical linkages consisting of 78 hydraulically actuated fingers. Influences include [Yngwie Malmsteen], but with more fingers and less of an ego, we expect Fingers to be an even better guitarist than his idol.

Bringing in the low-end is Bones, the robotic tread-mounted bassist for Compressorhead. Like Fingers, he plays an unmodified instrument. He’s also the newest member of the band, completed in 2012.

If you’d like to check out Compressorhead in person, they seem to be touring Australia right now. If you’d like to schedule them, their rider lists a requirement of 65 Amp, 3 phase power, 3 liters each of hydraulic fluid and motor oil, and suspiciously no requirement for removing all the brown M&Ms from a package. Be sure to check out the videos of the band in action on their media site.

Thanks [BadWolf] for sending this one in.

Brute Forcing A GPS PIN

January 5, 2013 by Brian Benchoff 120 Comments

[JJ] picked up a Garmin Nuvi 780 GPS from an auction recently. One of the more frustrating features [JJ] ran into is it’s PIN code; this GPS can’t be unlocked unless a four-digit code is entered, or it’s taken to a ‘safe location’. Not wanting to let his auction windfall go to waste, [JJ] rigged up an automated brute force cracking robot to unlock this GPS.

The robot is built around an old HP scanner and a DVD drive sled to move the GPS in the X and Y axes. A clever little device made out of an eraser tip and a servo taps out every code from 0000 to 9999 and waits a bit to see if the device unlocks. It takes around 8 seconds for [JJ]’s robot to enter a single code, so entering all 10,000 PINs will take about a day and a half.

Fortunately, the people who enter these codes don’t care too much about the security of their GPS devices. The code used to unlock [JJ]’s GPS was 0248. It only took a couple of hours for the robot to enter the right code; we’d call that time well spent.

You can check out the brute force robot in action after the break.

Continue reading “Brute Forcing A GPS PIN” →

Building A Rather Rudimentary Arduino Tank Bot

January 3, 2013 by Mike Szczys 7 Comments

building-an-arduino-tankbot

The tank robot builds that we see are often quite complex. This lets them do great things, but makes the platform scary for beginners. Here’s a tank build that would be a great first project, especially if you’re more interested in the programming side of robotics than you are in the hardware itself. [Paul Bleisch] combined several different commercially available products to fabricate this Arduino-powered tank robot base.

Locomotion is provided by a double geared-motor module. This unit, the plastic wheels and treads, as well as the wooden mounting platform are all made by Tamiya. They cost very little and are already designed to work with one another. To this base he adds the Arduino and a motor shield which makes the connections dead simple. The black case on one end of the chassis holds four AA batteries which provide power for everything.

These components are all that’s really needed to start, but they provide no interactivity. So [Paul] picked up a used wireless PlayStation 2 controller. There’s a library (written by regular reader [Bill Porter]) that allows him to connect the receiver to the Arduino in order to pick up commands from the controller. He also plans to add an ultrasonic range finder to the build sometime in the future.

If you’re don’t need to do things the easy way you should consider fabricating your own tank treads.

Tentacles And Phalanges Made From Drinking Straws

January 3, 2013 by Brian Benchoff 8 Comments

arnie

He human hand is one of the most impressive pieces of machinery – biological, mechanical, or otherwise – that you’ll ever lay eyes on. With two dozen degrees of freedom, the hand can gently caress the most fragile flower petal without bruising it, or beat a hammer into an anvil with tremendous force. Simulating the human hand, however, is quite a challenge that requires dozens of servos and complex mechanical linkages. [Tomdf] over on Instructables is able to create hands, tentacles, and other weird biological contraptions using spring-loaded drinking straws and custom-made 3d printed joints.

[Tomdf] got the idea for drinking straw phalanges after seeing a few 3D printed drinking straw connectors meant to be used for creating 3D objects out of disposable plastic tubes. After designing a new spring-loaded joint for drinking straws, [Tomdf] is able to add a few lengths of thread to serve as ligaments to control the segments of drinking straws. It’s a similar setup to the horrible demon spawn we saw at Maker Faire last year, but far more extendable for any project that might pop into your head.

You can check out the drinking straw tentacles in action after the break.

Continue reading “Tentacles And Phalanges Made From Drinking Straws” →

Robot Can Barely Move With So Much Hardware Strapped To It

December 24, 2012 by Mike Szczys 4 Comments

web-server-robot

We think that [Andrej Škraba] needs to start looking for a beefier motor platform. This little robot has so much hardware strapped to it the motors can barely keep up. But with a little help it can make its way around the house, and it takes a whole lot of connectivity and computing power along for the ride.

The white stick on the top is a single-board computer. The MK802 Mini sports an A10 processor and up to a gig of ram. Just below that is a USB hub which is sitting on top of a USB battery pack. This powers the computer and gives him the ability to plug in more than one USB device. The robot chassis is from Pololu. It uses an Arduino and a motor shield for locomotion, with commands pushed to it via USB.

This setup makes programming very easy. Here [Andrej] has a keyboard and HDMI monitor plugged in to do a little work. When not coding it can be disconnected and driven over the network. He makes this happen using an Apache server on the MK802 and node.js. See a demo of the system in the clip after the break.

Continue reading “Robot Can Barely Move With So Much Hardware Strapped To It” →

Webcam Eye-tracking Moves Robot-powered Skittles Candy

December 21, 2012 by Mike Szczys 8 Comments

robot-powered-skittles

This is a great hack, and it’s an advertisement. We wish this were the norm when it comes to advertising because they’ve really got our number. Skittles enlisted a few engineers to build a web interface that moves robot-powered candies.

When we started looking into this we figured that a few robots were covered with over-sized cases that looked like Skittles. But that’s not it at all. What you see above is actually upside down. The top side of the white surface has one tiny wheeled robot for each candy. A magnet was embedded in each Skittle which holds it to the underside of the surface. The user interface was rolled out on a Facebook page. It uses a common webcam for eye tracking. When you move your eyes, the robot controlling your assigned candy moves in that direction. See for yourself in the cllip after the break.

So we say bravo Mars Inc. We love it that you decided to show off what’s behind to curtain. As with the Hyundai pixel wall, there’s a whole subset of people who might ignore the ad, but will spend a lot of time to find out how it was done.

Continue reading “Webcam Eye-tracking Moves Robot-powered Skittles Candy” →

The Hexapod Hexacopter

December 18, 2012 by Eric Evenchick 34 Comments

Over at Mad Lab Industries, they had the idea of building a quadcopter that could walk and fly. By combining a hexapod with a hexacopter, they ended up with this creation.

The hexapod part started off with PhantomX Hexapod Kit, but it was far too heavy to fly. To reduce weight, they manufactured carbon fibre parts for the frame and legs. Even with the weight reductions, they still needed to six rotors to keep it stable.

The hexacopter part of the build uses more custom carbon fibre parts to mount the motors. The booms and mounts are also custom built out of aluminium. They used six E-Flite motors, propellers, and ESCs to provide lift.

A variety of controllers are used to run the robot. Two Arbotix devices handle the hexapod control, and a Hoverfly flight controller keeps it in the air. It’s controlled remotely using a Spektrum controller.

They have some ambitious next steps, including a mechanism that disconnects and reconnects the hexacopter and the base. After the break, check out a video of this impressive build in action.

Continue reading “The Hexapod Hexacopter” →