Modded See ‘N Say Teaches The Sounds Of City Life

March 13, 2023 by Tom Nardi 19 Comments

The Fisher-Price See ‘n Say was introduced back in 1964, and since then has helped teach countless children the different sounds made by farm animals. But what about our urban youth? If they’re going to navigate a concrete jungle, why not prepare them to identify the sound of a jackhammer or the chime that plays before an announcement goes out over the subway’s PA system?

That’s the idea behind this hacked See ‘n Say [John Park] put together for Adafruit. Now we should note up front that no vintage toys were sacrificed during the production of this gadget — it seems Fisher-Price (predictably) dropped the tiny record player these toys used to use for a cheap electronic board sometime in the 90s. A quick check with everyone’s favorite A-to-Z megacorp shows you can pick up one of these new-school models for around $25 USD.

The modern electronic version of the toy is easy to mod.

Cracking open the electronic version of the See ‘n Say reveals a circular PCB with a series of membrane buttons that are pressed by the mechanics of the spinning pointer. As it so happens, there are handy test points next to each of these buttons, which makes it simple to wire up to a microcontroller.

In this case, it’s Adafruit’s KB2040, which is connected to a MAX98357A amplifier board over I2S. A small boost converter module is used to wring 5 volts out of the toy’s pair of AA batteries. The original speaker is repurposed, though [John] adds a physical power switch to keep the boost converter from flattening the alkaline batteries when not in use.

On the software side, all you’ve got to do is load the MCU with your sounds and write a bit of code that associates them with the button being pressed on the PCB. [John] gets his city sounds from Freesound, a community-maintained database of Creative Commons Licensed sounds, and provides the CircuitPython code necessary to tie everything together.

The last step is the artwork. For this project, [Brian Kesinger] provided some swanky vintage-looking imagery that perfectly fits the See ‘n Say style. The art is available under the NonCommercial-ShareAlike Creative Commons license, so you’re free to use it in your own version. Though naturally, that assumes you’ve decided to use the same sounds as [John] — the beauty of this project is that you could easily load it up with whatever sounds you’d like Hacker Junior to learn. Possibly a well-known Australian YouTuber?

If anyone feels inclined to build a Hackaday-themed See ‘n Say based on this project, we’ve love to see it.

Continue reading “Modded See ‘N Say Teaches The Sounds Of City Life” →

The Last Meccano Factory Is To Close. Will We Miss It?

February 26, 2023 by Jenny List 63 Comments

If we were to talk to engineers about the childhood toys which most inspired them, it’s likely that the older among them would mention either Meccano or Erector Set. These similar construction toys using metal components originated independently around the turn of the 20th century in both Britain and America, and eventually became part of the same company.

They were a staple of toy shops through the middle of the century, but have steadily declined in popularity over the past few decades. Now news has emerged that the last dedicated Meccano factory, in Calais, France, is to close. The products will still be made, but in other factories alongside other toys. It’s not the end for Meccano or Erector Set, but it’s clear that they are both toys whose time may have passed.

It’s fair to say that the possibilities of those perforated metal sheets and myriad nuts and bolts might seem a little limited for the 2020s child, but it opens the age-old question of what remains to interest young minds in engineering or technology. The obvious answer to that question comes in the form of Lego, evidently so much more fun can be had with plastic bricks.

Did you have Meccano or Erector Set when you were a kid? If so what did you do with it? We’ve seen a few projects using it here over the years.

Header: Alf van Beem, CC0.

High-contrast pictures described on the article, put onto a wall beside a crib

High-Contrast Images For Hacker Family Harmonics

February 13, 2023 by Arya Voronova 12 Comments

There’s a new addition to the Adafruit family, and it’s not a microcontroller board as you’d expect – however, we will still find plenty to learn from. On the Adafruit blog, [Phillip Torrone] shares a set of high-contrast images with us; the idea for such images is that they’re more appealing for a child during the first few months of its life, and not just that – they can support a kid’s development, too. The idea behind high-contrast images is twofold. During the first few months of life, a baby’s visual systems are only taking shape, and are nowhere near being advanced – so, sources of easily discernible and varied visual input can help it develop, as well as, perhaps, aid in holding attention.

The second part is – they look nice in their own way, and one would hope that a baby can appreciate them in the same way parents do. The images are quite varied, with some being somewhat electronics-themed (including an Adafruit logo, of course) and many being fairly neutral, which has to be an upside for us hackers when it comes to the spouse acceptance factor. For any of us interested, there are downloadable PDFs and

In a way, these are just like AprilTags – aiming to be helpful in development of visual algorithms. With such a family, we can’t wait to see what comes next – computer engineering books? Baby monitors with machine learning? Sleep-data-driven knit blankets? No matter what’s in store for us, we hope that for the Adafruit family, this journey will be smooth sailing.

Domino Ring Machine Tips Tiles In A Never-ending Wave

February 9, 2023 by Donald Papp 9 Comments

Like to see dominoes fall? [JK Brickworks] has got what you need, in the form of a never-ending ring of falling and resetting tiles. LEGO pieces are the star in this assembly, which uses a circular track and moving ramp to reset tiles after they have fallen. Timed just right, it’s like watching a kinetic sculpture harmoniously generating a soliton wave as tiles fall only to be endlessly reset in time to fall again.

A Mindstorms IR sensor monitors a tile’s state for timing.

It’s true that these chunky tiles aren’t actually dominoes — not only are they made from LEGO pieces and hinged to their bases, they have a small peg to assist with the reset mechanism. [JK Brickworks] acknowledges that this does stretch the definition of “dominos”, but if you’re willing to look past that, it’s sure fun to see the whole assembly in action.

The central hub in particular is a thing of beauty. For speed control, an IR sensor monitors a single domino’s up/down state and a LEGO Mindstorms EV3 with two large motors takes care of automation.

The video does a great job of showing the whole design process, especially the refinements and tweaks, that demonstrate the truly fun part of prototyping. [JK Brickworks] suggests turning on subtitles for some added details and technical commentary, but if you’re in a hurry skip directly to 4:55 to see it in action.

Want to see more automated domino action? This domino-laying robot sets them up for you to knock down at your leisure, and this entirely different robot lays out big (and we do mean BIG) domino art displays.

Continue reading “Domino Ring Machine Tips Tiles In A Never-ending Wave” →

An image of a Modulex brick (left) next to a LEGO brick right. Both are 4x2 studs, but the Modulex brick is much smaller at 20x10x5 mm vs the LEGO's 32x16x9.6 mm.

Modulex Is LEGO’s Long Lost Cousin

February 8, 2023 by Navarre Bartz 23 Comments

We love LEGO here at Hackaday, but did you know that LEGO spun off a parallel product line made for architectural models called Modulex?

[Peter Dibble] takes us on a deep dive through the history of Modulex, starting with Godtfred Kirk Christiansen needing a better way to model actual buildings after trying to design a house in LEGO. The LEGO brick’s 5:5:6 ratio proved challenging for modeling full-sized projects, so Modulex was conceived around a 1:1:1 ratio 5 mm cube. This change means Modulex is not compatible with LEGO System bricks.

As architectural styles morphed through the mid-20th Century, designs based around blocky shapes became passe, and Modulex pivoted to targeting factory and city planning customers. Products later branched out to include wall charts and Plancopy photocopy-able planners along with reconfigurable signage. Modulex (now ASI) still goes on as one of the biggest signage companies in the world, but discontinued the bricks in 2004. An attempt was made to revive Modulex bricks in 2015, but LEGO Group bought the company that had the rights to the bricks and has no intention of producing Modulex.

For more LEGO hacks, checkout this machine learning LEGO sorter or these giant LEGO-like pieces.

Continue reading “Modulex Is LEGO’s Long Lost Cousin” →

Model Train Delivers Fresh Coffee

February 8, 2023 by Lewin Day 25 Comments

Model trains are good fun, though few of them serve any purpose beyond amusement or authentic railway simulation. [ProjectAir] decided to put his model train to practical use by having it deliver fresh espresso, and faced plenty of difficult challenges along the way.

It sounds simple, but the practicalities of the task proved difficult. After all, even a slight wobble is enough to tip a coffee cup off a small train. Automating everything from the railway itself to the kitchen coffee machine was no mean feat either. Plus, the aim was to deliver coffee from a downstairs kitchen up to an upstairs office. This meant finding a way to get the train to climb a steep staircase and to carry the coffee over a 20-meter journey without losing the caffeinated beverage in the process. That required the construction of a fancy train elevator to do the job — an impressive accomplishment on its own.

The final system is a joy to watch. Having a train roll into the upstairs workshop with a fresh brew certainly beats having to go all the way downstairs for a cup. Just don’t think about the fact that moving the coffee machine upstairs might have been a quicker solution.

Continue reading “Model Train Delivers Fresh Coffee” →

Dad Builds Frickin’ Tank For His Son

February 3, 2023 by Anool Mahidharia 25 Comments

We gotta love hacker Dads and Moms for being so awesome. Sooner or later, their kids get to play with some amazing toy that every other kid on the block is jealous of. [Meanwhile in the Garage aka MWiG] is one of those super hacker Dads who built a frickin’ Tank for his son (video, embedded below.). But it’s so much fun driving that beast around that we suspect Dad is going to be piloting it a lot more than the kid. The tank features metal tracks, differential steering, a rotating turret, periscopes and a functional paintball gun with camera targeting.

Building a tank, even if it’s a mini replica, needs an engine with a decent amount of torque. [MWiG] first tried reviving an old ATV engine, but it did nothing more than sputter and die. It went to the scrap heap after donating its rear transmission and axle. [MWiG] managed to get an old Piaggio scooter with a 250cc / 22 hp engine. The scooter gave up its engine, electricals and the instrument cluster before being scrapped. Looking at the final build, and the amount of metal used, we are left wondering how the puny 22 hp engine manages to drive the tank. We guess it’s the right amount of gearing for the win.

Continue reading “Dad Builds Frickin’ Tank For His Son” →