Quick And Easy DIY Kegerator

February 28, 2011 by Mike Nathan 17 Comments

diy_kegerator

I think we can all agree, there are few things that go better with ~~hacking~~ everything than beer. [Tom] has taken his love for beer and building things, fusing them together in a DIY kegerator. Using an off the shelf mini fridge and some easy to find beer serving components, he walks us through the conversion step by step. When everything is said and done, the kegerator should hold two 5-gallon kegs along with the CO2 tank required to serve the beer.

The process is admittedly pretty easy, but it’s probably the quickest way to go from zero to kegerator. [Tom] has this down to a science, knowing exactly what needs to be altered and removed, so following his tutorial should save you time and headaches, should you attempt this conversion yourself.

It would be great to see this project expanded to include precision temperature controls, a method of determining how much beer remains in the kegs.

Refurbishing A Refrigerator For Fermenting

January 25, 2011 by Caleb Kraft 12 Comments

[Mikey Sklar] wrote in to show us how he refurbished a neighbors useless refrigerator as a fermentation chamber. [Mikey] is a fan of making breads, kemchi, yogurt, and tempeh. To make these, it helps to have a completely controlled temperature for them to ferment in. [Mikey] developed a temp controller for this in the past, but had to either build a control box or use a giant chest freezer. This is not optimal for limited space, such as a kitchen. He got lucky when a neighbor tossed a wine cooler into the trash. These little coolers are perfectly sized for a kitchen and even have a glass front so you can keep an eye on what is going on inside without having to open it and effect your temps. [Mikey] ripped it open, replaced the peltier cooler with a large heat lamp and his temp controller. Since he was making yogurt with this one, he needed only to heat it. The final product turned out pretty effective.

Beer Catapulting Fridge

January 10, 2011 by Caleb Kraft 21 Comments

We’re not sure where the fascination to have your libations flung at you came from, but we can’t say we’re entirely against it. This beer catapult robot (dead link try Internet Archive) will pull a cold one from its gullet and fling it to you, or in your general direction. While he doesn’t have the source code available for the Arduino bit, we’re OK with that. We’re more interested in the mechanisms at work here and there are plenty of pictures of his set up. It seems very similar in design to this one we covered back in 2007, which also appeared on” The Late Show with David Letterman”. Join us after the break to see the thing in action.

[thanks Springuin]

Continue reading “Beer Catapulting Fridge” →

Beer Shooting Dorm Fridge

January 1, 2011 by Caleb Kraft 20 Comments

blunt force traumomatic

When we first heard the parts list for this project, we weren’t too impressed. It has an iPhone connecting to an IObridge etc… But then we heard the next, and most important part, an air cannon and an assortment of beer. We were sold. As you can see in the video after the break, a fancy iPhone interface lets you select your beer, then dispense it into the cannon for delivery. The next step is to aim using a web cam mounted at the cannon and let ‘er rip! The beer is fired across the room and into your hands. We suspect that the amount of cranial injury, holes in the drywall, and shattered glass will greatly increase in frequency as the night goes on. Awesome.

Continue reading “Beer Shooting Dorm Fridge” →

Solid Ice Beer Caddy

September 5, 2010 by Caleb Kraft 31 Comments

brrrrr

[Rob] has made an astounding contribution in the effort to keep our libations chilled. Not content with merely refrigerating his cold ones, or even putting them in a cooler full of ice, he has built a beer caddy out of solid ice. Though it may look simple initially, you can see from his writeup that it actually took quite a few itterations to get it to freeze correctly, and then actually survive the process of removing the bottle placeholders. Ultimately, he found that glass bottles full of sand work best and you have to freeze the caddy in layers. Though he calls himself an impatient person, we’ve seen people who insisted on having their cold ones made frigid faster. You can see a video of the ice caddy after the break.

Continue reading “Solid Ice Beer Caddy” →

Baxter The ButlerBot And RoboFridge

June 9, 2010 by Caleb Kraft 15 Comments

[youtube=http://www.youtube.com/watch?v=HvOGwylZOM4]

[Steve Norris] has been devoting his time, effort, and knowledge to the most noble of causes; cool beverage acquisition. Baxter the ButlerBot and RoboFridge work in tandem to deliver cold ones when needed. As you can see in the video, this possibly over engineered system works quite smooth. Though the details on his site are pretty limited, browsing his Flickr stream will get you all those delicious construction photos you crave.

[via Flickr]

Old School Vending Machine Learns New Tricks

May 17, 2010 by Mike Szczys 25 Comments

Thanks to craigslist [Chris] got his hands on a soda vending machine circa 1977. It still worked just fine (because things were still built to last back then) but he wanted to add some super-secret upgrades to the beverage dispensary. Two capacitive touch sensors were added to override the need for coins for those who know where to caress the beast, and iPhone support means that frothy beer is just a touch away.

The capacitive switches are using the same QT100 chip we saw in the game of life from last year. The whole thing runs off of a Phidgets board which we’ve seen in the past using iPhone control to launch rockets. See a demonstration of the features in the clip after the break. We’d love to do a hack like this but the problem is once you’re done, you’ve got a vending machine sitting in your house.

Continue reading “Old School Vending Machine Learns New Tricks” →