We’ve lost track of the number of home built CNC machines we’ve covered in the past, but we thought a comprehensive list of the best would help you understand why we’re so excited about the LumenLab CNC machine.
cnc657 Articles
Lumenlab’s New Kit: Open Source CNC
Imagine our surprise when we stumbled on the latest Lumenlab project: gantry style CNC. Until now the only time we ever invoked their name was for DIY projectors. The kit looks pretty interesting, and they’re taking pre-orders right now. It’s designed for a full sized router and you should be able to cut a 4′ by 8′ sheet with a feed roll. Even without, the cutting area is a large 26″ by 50″ and features 8″ of Z movement. Between their kit and an order from Online Metals, they’re projecting that you can build your own for around $1000. We’re definitely in when the final kit is released in June.
PCB Milling Hell Sunday Extra
I’ve spent about 18 of the last 24 hours working on milling a PC board for my upcoming how-to. So far I’ve murdered several copper clad boards, built a hold down table, redesigned the board in eagle at least five times and snapped off a $15 half round engraving bit.
If you’re wondering, my new board milling table is a piece of MDF that I laser etched a .25″ grid onto, then added some aluminum strips to act as hold-downs. On the side of the strip opposite the board, I put thin slices of PC board to level out the hold downs. As usual, I’m building the board in eagle. To turn the board into something the mill can handle, I’m using pcb-gcode, a nice little g-code generation tool for eagle. I may switch methods later, but if I can get the settings tweaked, it’ll make my design to board milling process very fast.
[Scott] sent in the beginning of his attempt to build a frequency detector. He’s started out with just simple LCD matrix. Nothing intensely interesting just yet, but I like it when people send in stuff they’re working on.
If you haven’t checked out the Arduino yet, do it. It’s the easiest micro controller dev platform I’ve seen. If you’ve got one, now you can hook up a Wii-Nunchuck to it. If you like smaller and cheaper, check out [ladyada]’s boarduino.
[eliot] wanted me to mention this video on hacking drive through speakers. It’s a bit cheesy – and all I could think of was Thunder Run – where the geek character swapped the crystals in the CB radios. (Warning, The FCC might have some expensive words for you if you get caught.) Update: this is what you get if you don’t watch the entire video and catch the joke about taking apart toasters.
Tomorrow I should be picking out some winners for my laser etched laptop (or whatever) offer. You can still win some free etching time! Just send in a tip! The winners are selected from the ones that get published on Hack-A-Day.
CNC Solder Paste/pick N Place
Just when I thought I’d seen most of the CNC mods out there, [Steve Ciciora] (who happens to be one of the driving forces behind the killacycle) sent in his diy solder paste dispenser *and* his diy pick and place machine. Both are extensions of his CNC taig mill. Hopefully [steve] will put up some more details of his mill mods.
Make A Badass CNC Mill
Ben Heck and I got into converting a mill to be a CNC machine during our podcast interview. Today I found a pair of great write ups at balbots on modding the Harbor Freight mini mill that I mentioned. Part 1 get into all the details of converting the mill to use stepper motors, and adding a cooling system. Part 2 covers upgrading to DC servo motors and replacing the gears with a belt drive system.
Ben Heck Interview Part 2
Here’s part 2 of my interview with Ben. (Or just grab it via the feed) We answer some more questions and go off on a few tangents about cnc machines, the PS3 and part sources. It cuts directly to the interview – I don’t want to wait 6 hours to record it. I should have a regular podcast up in the next day or two.
