Automatic Pneumatic Drum Kit

November 23, 2009 by Jake W 16 Comments

Move over Steve and PEART… there’s yet another robotic drummer in town. [Fauzii] tipped us off to his own MIDI-controlled creation – WizardFingers. According to him, WizardFingers is already capable of 64th note rolls at over 250 beats per minute. That’s on every drum simultaneously. Each drum is hit with a lever attached to a linear pneumatic actuator. A laptop running MAX/MSP generates MIDI sequences, which are sent to Doepfer MTC64 board. All of these actuators are hooked up to the board, which sets them off in sequence.

[Fauzii] ultimately hopes to develop AI software that will allow WizardFingers to compose its own tunes on not only a drum kit, but bar chimes and an organ as well. His site documents the whole concept quite well (just watch out for wild cats).

Auto-drummer

November 13, 2009 by Mike Szczys 25 Comments

[youtube=http://www.youtube.com/watch?v=COl1xmWAjUw]

Mix a cup of mechanical engineering with a dash of drum set and you end up with Steve, the robotic drummer. We know that it uses an MSA-T Midi Decoder but that’s about the extent of what has been shared. Just from observing the video, we think Steve’s got a few things going for him when compared to PEART, the robot drummer we saw back in 2005. Steve features two sticks for each drum and symbol and seems to be quite responsive.

Steve’s great, but we still think Rick Allen’s got this thing beat. Although this is a quality build, there’s no replacement for a human that can bang the drum in millions of subtly different way. That isn’t to say we don’t see potential in the hack. Perhaps it’s time to update a classic idea, the robotic orchestra. Don’t know what we mean? Check out 3:58 into the video embedded after the break.

Continue reading “Auto-drummer” →

BBox MIDI Drum Sequencer

September 14, 2009 by Zach Banks 10 Comments

bbox

We’ve covered sequencers before, but reader [Johan] sent in his latest project that is much more minimalistic approach. Dubbed the BBox, he based his drum generator on an Arduino and an LCD display. Rather than synthesizing sound, the Arduino just outputs MIDI which is then interpreted by his Roland Juno-D. In building the device he used a favorite trick of ours to keep the interface clean. He then found an awesome banana box to use as a case. Although, the project may not be as functional as some of the others out there, it certainly has flair. Video of it in action after the break.

Continue reading “BBox MIDI Drum Sequencer” →

Rock Band Drum Set Remake

September 11, 2009 by Jakob Griffith 11 Comments

[youtube=http://www.youtube.com/watch?v=uQhAx4l0fvs&feature=player_embedded]

We’ve seen some impressive mods for the popular video game Rock Band, from new cymbals to an air powered kick pedal, but we cant say we’ve seen someone go as far as the folks over at EDrums. They start off making their own mesh heads, a junction box to connect everything, and then a base to hold it all together. It is definitely some dedication and hard work for a setup that will only be used in the living room in front of the T.V. Check out some more video of it in action, and a comparison to the original Rock Band drum set, after the break.

Continue reading “Rock Band Drum Set Remake” →

Automated Drum

March 29, 2009 by Eliot 25 Comments

snaredrum

A team of three PhD students constructed this ‘multi-mallet automatic drumming instrument (Madi)‘. Their Expressive Machines Musical Instruments site is dedicated to building instruments like this and they recently showed their work at the first annual Guthman Musical Instrument Competition. A ‘low-stakes X Prize’ for musical instruments. 25 applicants were chosen to show their unique musical instruments for $10K in prizes. We like the team’s Madi because it’s adapting a traditional instrument and then pushing it to the limit. It reminds us of the Crazy J mechatronic guitar from 2005. You can see a video of the Madi playing below.

Continue reading “Automated Drum” →

Rock Band Kick Pedal

February 3, 2009 by Caleb Kraft 25 Comments

drumwithpedalmod

[Raphael] sent us this nice kick pedal mod for Guitar Hero: World Tour. After breaking his kick pedal repeatedly, he decided to build something a bit more robust. He went to the music store intending to pick up a cheap kick pedal to start with and happened to start a conversation with an employee who had a practice pad to get rid of. [Raphael] relieved him of his practice pad and promptly made a base to hold it in position. After attaching his piezo sensor to the back of it, he had a very robust kick pedal. we can’t imagine him breaking this one any time soon.

MIDI Drums For Guitar Hero And Rock Band

November 30, 2008 by Eliot 18 Comments

[youtube=http://www.youtube.com/watch?v=2a497Hom8Gg&fmt=18]

Embedded above is [egyokeo]’s solution for using MIDI drums with Guitar Hero. He’s playing a DrumKAT MIDI kit. It connects to a PC running his MIDI Hero software, which handles timing and multinote combinations. The PC uses a USB ToolStick microcontroller to send commands to the console using an FPS adapter or soldered into the instrument. It’s a fairly good solution if you’re building a generic controller and need to modify the signaling.

When Rock Band was first released, modders sought to adapt their MIDI drum kits for use with the game. The easiest solution they found was Highly Liquid’s MSA-P. It’s a photorelay based MIDI decoder. You need to solder directly to the brain in the Rock Band drums. If you’re planning on modding any instrument, check the compatibility matrix first. Hopefully you’ll end up with something that can be used across multiple games.

[via Gizmodo]