dtg

6 Articles

Print Directly On Fabric With An Inkjet Printer

November 9, 2016 by 8 Comments

[fungus amungus] was reading online about printing directly on fabrics with a home printer. He’d read a few hopeful tutorials about printing on them with a laser printer, but he didn’t own one.

Considering that you can occasionally buy an inkjet for less than the ink, he decided to take the plunge and see if he could print on a swatch of fabric with his inkjet. The technique requires a printer, some wax paper, scissors, and an iron.

By adhering the wax paper to the fabric properly, it’s possible to run it through the printer without tears. (We’ll let you pick the heteronym.) The final step is to let the ink sit for an hour before running the iron over it again. This seems to cure the ink and it can even survive a few washings.

Being able to make any pattern of cloth on demand seems like a useful thing to keep in the toolbox!

DTG: Improved Printing On T-shirts

November 16, 2010 by 21 Comments

[Jeff German] improved upon his DIY direct to garment printer an ended up with a machine he thinks is equivalent to anything you can buy commercially. We last looked in on this project in June but much has been done since then. Most notably, there are build instructions available (requires login). [Jeff’s] printer is based around an Epson R1900 plus the base that holds and feed a garment. Take a look after the break to see it printing full color designs in high resolution. From the YouTube description it sounds like he wants to go into production with this. Kudos to him for also sharing the build techniques.

Continue reading “DTG: Improved Printing On T-shirts” →

DTG Using A Stock Printer

June 27, 2010 by 27 Comments

[youtube=http://www.youtube.com/watch?v=qc3OrrsnMHs]

Here’s a Direct-to-Garment device that uses a stock printer. [Jeff German] used an Epson R1900 with the stock firmware to get the results seen in the video. His hardware modifications involve adding two buttons to the printer’s circuit board. For DTG beginners this certainly lowers some of the obstacles to getting started. [Jeff] is working on detailed instructions but for now take a look at our own How-to for building a DTG printer.

(mini)How-To: Refill Your DTG Inks

June 9, 2010 by 18 Comments

The number one and number two things asked after presentation of our DIYDTG were…
“How does it hold up in the wash?”
and…
“How did you change out the inks?”
While we’ve explained the first several times (regular ink washes out, DTG ink gets a little lighter but survives) we can hopefully answer the second with a tutorial.

Continue reading “(mini)How-To: Refill Your DTG Inks” →

How-to: DIYDTG

June 6, 2010 by 130 Comments

For those unaware, the little acronym above stands for Do-It-Yourself-Direct-To-Garment printing. In layman’s terms, printing your own shirts and designs. Commercial DTGs can cost anywhere from $5,000 to $10,000 which for the hobbyist who only wants a few shirts is ridiculous. So you would think this field of technology would be hacked to no end, but we’ve actually only seen one other fully finished and working DIYDTG. So we took it upon ourselves to build a DIYDTG as cheaply and as successfully as possible. Continue reading “How-to: DIYDTG” →

Direct To Garment Printing

September 20, 2008 by 32 Comments

[youtube=http://www.youtube.com/watch?v=f3iOuKzhUlQ]

Reader [deren lik] pointed out the world of direct to garment printing to us. You can purchase commercial machines that will print directly onto a t-shirt using inkjet technology. Unfortunately, these machines cost ~$10K, so hackers have decided to fill in the gaps. DIYDTG hosts plans for how to build your own DTG printer. Their standard instructions are based around the Epson C88 printer. A custom carrier is constructed and then the printer components are bolted on top. Commercial DTG printers are also based on Epson parts and you can easily purchase the garment inks even if you didn’t pay a premium for your printer.