Mixer For Korg Volcas

November 30, 2014 by Brian Benchoff 5 Comments

Korg, everyone’s third or fourth favorite synth company, but one of the only ones that still in business, recently put out a new line of synths, drum machines, and groove boxes. They’re called Volcas, and they’re cheap, analog, and very cool. [Jason] has a few of these Volcas, and while he enjoys the small form factor, using an off-the-shelf mixer to dump send the audio from these machines to his computer takes up too much space. He created a passive mini mixer to replace his much larger Mackie unit.

The circuit for this tiny passive mixer is an exercise in simplicity, consisting of just a few jacks, pots, and resistors. [Jason] overbuilt this; even though the Volcas only have mono out, he wired the entire mixer up for stereo.

The enclosure – something that looks to be a standard Hammond die cast aluminum enclosure – was drilled out, and a lovely laser cut acrylic laminate placed on top. It looks great, and for anyone interested in learning soldering, you couldn’t come up with a better first project.

A Mixer (re)built To Travel

July 26, 2012 by Mike Szczys 11 Comments

[Toby Cole] likes to mix tunes whenever he gets a chance. But the size of his DJ equipment made it a real bother to lug around with him. He does own a Behringer portable mixer but without cross faders it’s not really all that usable, and most of the other offerings don’t get good reviews. He ended up replacing the enclosure of a proper mixer in order to make it light and small. The growing availability of affordable laser-cut parts made this project possible.

Build Brighton, [Toby’s] local Hackerspace, has a laser cutter. So he knew that if he could figure out a smaller case design it would be a snap to get his parts made. He cracked open the heavy metal case on the KMX 100 mixer and found it had a ton of extra room inside. He designed all of the plates using a digital calipers to properly space the holes and text labels. These designs were combined with BoxMaker to produce the files the laser cutter needed. The first prototype was cut from cardboard, with the finished product cut from 3mm plywood.

Cocktail Machine Minces Words

September 30, 2011 by Mike Szczys 10 Comments

For those living in a magical land of candy, with orange-faced helpers to do their bidding, the ability to taste your words is nothing new. But for the rest of us, the ability to taste what you type in cocktail form is a novelty. [Morskoiboy] took some back-of-the-envelope ideas and made them into a real device that uses syringes as keys, and facilitates the injection of twenty-six different flavorings into a baseline liquid. He figures that you can make each letter as creative as you want to, like representing different alcohols with a letter (T for tequila) or matching them to colors (R for red). Check out the video after the break to see an ‘Any Word’ cocktail being mixed.

This setup is entirely mechanical, and makes us wonder if [Morskoiboy] works in the medical equipment design industry. Each letter for the keyboard is affixed to the plunger on a syringe. When depressed, they cause the liquid in an external vessel (not seen above) to travel through tubing until it fills the proper cavities on a 15-segment display to match the letter pressed. From there the additive is flushed out by the gravity-fed base liquid into the drinking glass. We can’t imagine the time that went into designing all of the plumbing!

Continue reading “Cocktail Machine Minces Words” →

Convert An Old Busted Phone Into A Voice-altering Prank Machine

March 23, 2011 by Mike Nathan 10 Comments

Have you ever wanted to be someone else, at least over the phone? Do you dream of turning the tables on telemarketers, making them hurry to get off the line instead of you? If so, [Brad] over at LucidScience has the project for you.

A bit of a prankster at heart, he walks through the conversion of a normal telephone into a Data Access Arrangement device (DAA), allowing you to interface it with either hardware or software-based audio mixers.

The process can be completed in a relatively short time period, and doesn’t require much more than an old telephone, a handful of tools, and some miscellaneous switches and jacks. He disassembled a telephone and trimmed off all of the unnecessary circuitry while retaining most of the original functionality. Line in and out jacks were then installed in place of the handset microphone and speakers, respectively. The final result is a compact box that relays altered audio from any kind of mixing device to person at the other end of the call. Since the majority of the phone remains intact, your calls still sound natural as they pass through the phone’s existing voice filter and preamp circuitry.

Once the DAA is complete, you can use any number of effects on your voice, limited only by your audio mixer. [Brad] says he has long-time friends that don’t even recognize his voice after he has run it through his effects machine, so get started on yours before April Fool’s day arrives!

Beginner Project: Super Cheap Magnetic Mixer

March 16, 2011 by Jesse Congdon 23 Comments

[wesdoestuff]’s mother needed a clean way to mix together fragrance oils. Being the stand up kinda guy he is, [Wes] threw together a few spare parts to make this Magnetic Stir Plate.

The whole setup is amazingly simple. Pry the fins off of an old computer fan, glue a couple magnets to the fan’s hub. Drill a hole for a DC connector, find some sort of cover and.. Bob’s your uncle! [Wes] advises that you test the spacing of the magnets on the hub before gluing them permanently, as they can be a bit tricky to align.

The stir bar for non food items is a magnet bar from one of those crazy magnet and ball bearing toys, it is basically just a solid magnet covered in plastic. Food safe bars can be acquired, though they are not as cheap. With all that room under the hood we would love to see him throw in some kind of a PWM speed control but that could be a bit complicated. Most of us could throw this together from spare parts. Video after the jump!

Continue reading “Beginner Project: Super Cheap Magnetic Mixer” →

Moving Speakers To Mix Audio Tracks

May 30, 2010 by Mike Szczys 11 Comments

These speakers play different audio tracks depending on which orange square the sit atop. They’re RFID aware and the orange tiles are tags. If you get tired of a track just move the speaker to a different one, or place the speakers next to each other to play the same song. We’re sure there’s a project for us here, it’s just going to take some thinking to figure out what we want to do with it. But the concept is certainly intriguing. Check out the video demonstration after the break.

Continue reading “Moving Speakers To Mix Audio Tracks” →

Aurora Mixer No Longer Available

September 5, 2008 by Joey Celis 11 Comments

A few days ago we wrote about the aurora open source mixer being available and that orders for the DIY or completed kit needed to be in by September 1, 2008. Well that day has since past and if you were on the fence about it and didn’t get your order in don’t worry about it. Turns out no one will be getting a mixer.

Aurora informs us that they needed to secure a minimum of 50 orders to cover cost, but in reality they were only able to secure less than 20 orders. Because of this, they will not be able to meet the initial production numbers and have postponed the sale of the mixer indefinitely.

All is not lost as they will keep the site up, along with the instructions on how to build your own mixer from scratch.