Mailblocks Makes Your Phone Work More Like The Post, Kinda?

December 23, 2023 by Lewin Day 3 Comments

Phones can be distracting, with notifications popping up all the time to snare our attention and maybe even ruin our lives. [Guy Dupont] wishes to be no slave to the machine, and thus built a solution. Enter Mailblocks.

The concept is simple. It’s a physical mailbox which [Guy] can put his phone in. All notifications on the phone are blocked unless he puts his phone into the box. When the phone is inside and the box is closed, the little red flag goes up, indicating “DOPAMINE” is available, and [Guy] can check his notifications.

To achieve this, [Guy] is running a custom DNS server. It redirects all the lookups for push notifications on Android so they go nowhere. Placing the phone in the mailbox turns the re-directions off, so the phone can contact the usual servers and get its notifications as normal.

It’s a novel way of fighting against the constant attention suck of modern smartphones. Rather than being bombarded by notifications in real time, [Guy] instead has to take a significant intentional physical action to check the notifications. It cuts the willpower required and the interruptions to his work in a fell swoop.

We’ve featured [Guy’s] innovative and outside-the-box projects before, too. His smart pants were an absolute tour de force, I might add.

Continue reading “Mailblocks Makes Your Phone Work More Like The Post, Kinda?” →

IoT Cassette Scroller Never Needs A Pencil

March 10, 2020 by Kristina Panos 33 Comments

The see-through electronics craze of the ’80s and ’90s clearly had an effect on [MisterM], and we can totally relate. Those candy-colored components inside undoubtedly launched a few thousand kids in the direction of electronics, as we can attest.

Though the odds seemed very much against him, [MisterM] was able to fit all the necessary components for a scrolling IoT notifier inside a standard cassette tape. It took a bit of surgery on both the Raspberry Pi Zero W and the donor cassette in the name of getting all the components to fit in such a tight space. We’re glad he kept at it, because it looks amazing.

The Raspi uses Adafruit.IO and IFTTT to get all kinds of notifications — tweets, weather, soil moisture, you name it — and scrolls them across an 11×7 LED matrix. A vibrating disc motor gives a buzzing heads up first, so [MisterM] doesn’t miss anything. Hit the break button and flip this thing over, because the build video is all queued up on the B-side.

If you’d rather play around with cassette decks, add in some playback speed potentiometers to mess with the sound, or go all out and make a Mellotron.

Continue reading “IoT Cassette Scroller Never Needs A Pencil” →

Monitor Your 3D Printer With Node-RED And Tasker

March 27, 2019 by Tom Nardi 11 Comments

Anyone with a desktop 3D printer knows that it can be a bit nerve-wracking to leave the machine alone for any extended period of time. Unfortunately, it’s often unavoidable given how long more complicated prints can take. With big prints easily stretching beyond the 20 hour mark, at some point you’re going to need to leave the house or go to sleep. We hope, anyway.

In an effort to make his time away from his printer a bit less stressful, [Mat] from NotEnoughTECH has put together a comprehensive framework for monitoring his machine on the go. After looking at existing remote monitoring solutions, he found none gave him the level of information he was after. His system collects up an incredible number of data points about the printer’s current status and pushes it all to his Android phone as a rich notification. Best of all, he’s documented the entire system in exquisite detail for anyone else who might want to follow in his footsteps.

There’s a considerable amount of hardware and software involved in this system, and getting it up and running won’t be quite as straightforward as using some of the turn-key solutions out there. Octoprint is responsible for controlling and monitoring the printer, and [Mat] is pulling data from its API using Node-RED. That data is formatted and ultimately delivered to his Android device as a notification with Tasker. On the hardware side he’s got a Sonoff POW R2 to not only turn the printer on and off but measure its energy consumption, a USB camera to provide a live view of the printer, and a couple of Raspberry Pis to run it all.

Even if you don’t have a 3D printer, or maybe just don’t leave the house to begin with, the video [Mat] has put together after the break that shows how all the elements of this system are pulled together in Node-RED is a fascinating look at the flow-based visual programming tool. Similarly, it’s a great demonstration on how Tasker can be used to add some very slick Android notifications for your project without having to commit to developing a native application for the platform.

If you like the idea of remotely monitoring your printer but aren’t ready to dive into the deep end like [Mat], there are easier options. With a Raspberry Pi running Octoprint added to your 3D printer and one of the existing mobile monitoring and control front-ends installed, you’ll be well on the way to tackling those big prints without having to pitch a tent in the lab.

Continue reading “Monitor Your 3D Printer With Node-RED And Tasker” →

Adding Energy Use And Cost To “Laundry Done” Notifications

November 3, 2018 by Donald Papp 29 Comments

Some time ago [Xose Pérez] got interested in generating a notification when his washer had completed a cycle, and now with added features like reporting power usage and cost, he’s put it all together into a Node-Red node that makes it easy to modify or integrate with other projects.

[Xose] started this journey with a Laundry Monitor he created that effectively used cheap hardware (and his own firmware) to monitor his washing machine’s current usage. That sensor was used as the basis for sending notifications informing him whenever the appliance’s cycle was done. Since then, he has continued to take household power monitoring seriously, and with a bit of added work can not only tell when a given appliance has been started and stopped, but can also summarize the energy usage and cost of the appliance, making the notifications more useful. The package is named node-red-contrib-power-monitor and is also hosted on GitHub.

Cheap WiFi-enabled smart switches are making it possible for even the dumbest of appliances to join the Internet of Things, so don’t ignore [Xose]’s complementary work on ESPurna, which is an alternative open-source firmware for a wide variety of ESP8266 and ESP8285 based smart switches, lights and sensors.