Update: Acrobatic Quadcopters Team Up

July 12, 2010 by Mike Szczys 34 Comments

We usually envision small wheeled robots when we thing about swarm robotics but these cooperative quadcopters make us think again. This is an extension of the same project that produced those impressive aerial acrobatics. It may not be as flashy, but watching groups of the four-rotored flyers grab onto and lift loads is quite impressive. There is also a shot of one dropping a 2×4 and immediately compensating for the loss of weight. We’re not certain, but it looks like team lifting doesn’t require the 20 high-speed camera rig that the acrobatics did. We’ve embedded the demonstration video after the break.

Continue reading “Update: Acrobatic Quadcopters Team Up” →

Distributed Flight Array

June 9, 2010 by Caleb Kraft 17 Comments

[youtube=http://www.youtube.com/watch?v=7iHZKMDvdNI&w=470]

Though it is in the beginning stages of development, the Distributed Flight Array is already looking very interesting. Each unit can scuttle across the ground using the down force from its prop, but when 4 or more join forces, they can take off and fly. The documentation shows that they should be smart enough to fly in random configurations, though in the video we only see the standard 4 prop layout. This is being worked on by the same people who produced the balancing cube.

[via BoingBoing]

I-Swarm Robot Update

August 31, 2009 by Mike Szczys 9 Comments

I-Swarm_Micro_Robot_On_Thumb

Back in October we reported on the I-Swarm robotics project. [Travis] sent us some more information. These tiny robots are programmed optically and are able to respond to programming commands via an infrared signal. Locomotion is facilitated with piezoelectric actuators and the power to the units provided through a solar cell. It is not clear that this project is still ongoing as the I-Swarm web page lists a project termination date of 6/31/2008. That being said, the video embedded after the break was posted two days ago showing swarm movement and detailing the programming, testing, and hardware specifics. Continue reading “I-Swarm Robot Update” →

25C3: Cheap Swarm Robotics

December 30, 2008 by Eliot 5 Comments

swarm-2

The Formica project was our favorite presentation at 25C3. The goal is to build open source swarm robots as cheaply as possible. The team ended up building 25 robots in an assembly line fashion. With enough lead time, the price could get as low as £15 each. Each bot has two direct drive cellphone vibration motors with tiny neoprene wheels. They’re controlled by an MSP430 microcontroller. The only really specialized chip is a charge controller so the bots can charge without any intervention. They have copper skis on the front that touch the ground plane plus antennas to contact Vcc. On top of the bot are three IR detectors for both navigation and for transferring firmware updates between bots. A reflective sensor is on the underside for detecting “food”. It looks like a great design and any easy way for anyone to start researching swarm robotics.

Autonomous SWARM At Large

August 6, 2008 by chriskiick 9 Comments

SWARM has been showing up at a number of places. Until now, the mysterious spheres have been under human control. However, the SWARM has taken the first steps to autonomous control. The SWARM is a kinetic art project consisting of several large self-propelled metallic spheres that interact with each other and their environment. Each orb in the swarm is fitted out with a processor, GPS, accelerometers, and Zigbee wireless communications. The entire project is open source. Slated to appear at the 2008 Burning Man festival, the orbs will use their GPS to wander within a specified area, keeping themselves “in bounds”.

Continue reading “Autonomous SWARM At Large” →

Swarm Robotics

May 13, 2008 by chriskiick 4 Comments

Uber-geek [James McLurkin] was in Austin recently demoing his robot swarm. He’s on tour with EDA Tech Forum. [McLurkin] has multiple degrees from the MIT AI lab and worked at iRobot for a couple of years. Lately, he has been working on distributed robot computing: robot swarms.

[McLurkin] was an entertaining speaker and had an interesting view of robotics. He is optimistic that robot parts will become more modular, so it will be easier to build them, and more importantly, faster to design them.

Some quotes:

“There’s more sensors in a cockroach’s butt than any robot”
“12 engineer years to design, 45 minutes to build”
“If it can break your ankle, it’s a real [rc] car.”

Continue reading “Swarm Robotics” →

Maker Faire 2008: SWARM

May 6, 2008 by Eliot 15 Comments

SWARM is a large scale kinetic art project. The electrically powered spheres move by shifting the batteries around the center axle. By tilting the central ring, th orb can steer as well. The SWARM members are currently radio controlled, but the plan is for them to eventually receive commands from a mother node. More information about the orbs’ design is available on the project wiki. A video of the wobbly buggers in motion is embedded after the break.