[Viktor] wanted a system to keep his pipes from freezing. The common method of using heat tape works pretty well, but can be wasteful. Many people just turn it on for the entire winter. [Viktor] wanted to automate the heat tape’s power so that it only activated during times that the pipes could actually freeze. To do this, he rigged an ATMega8 to a temp probe and is using it to control an ATX power supply. Pretty slick [Viktor].
[via HackedGadgets]
We think the click wheel is the biggest contributor to the success of the original iPods. The devices were a brick with a monochrome screen but the user interface was slick and easy to use. [Jason] decided he wanted to add a click wheel to his own project. After using a logic analyzer he discovered that it doesn’t implement a common protocol such as I2C, perhaps a deliberate move by Apple to keep the controller under wraps? He managed to get past this hurdle, as seen in the video after the break, by bit-banging the data in from the click wheel and then reverse engineering the protocol.
It’s connected to an AVR ATtiny88 with feedback shown on a character LCD screen. We’re glad that [Jason] tipped us off about this, but he doesn’t have any code available yet. We love to dive into the source so the sooner he gets it up the better! We’ve got an old 3rd generation with a bad board that is begging to have the wheel ripped out of it, not to mention the dirt-cheap replacements available on ebay. Continue reading “Repurposing A Click Wheel”
[Hounjini] was poking around at the Game Boy Advanced bus of his Nintendo DS lite and figured out how to use it to connect an Arduino to the DS. For testing he’s soldered an IDC plug to the cartridge cover pin interface but this only requires four connections. The Arduino can both send and receive data from the DS lite as shown in the example videos after the break. The data access is made possible by making the Arduino look like a controller that the DS is happy to talk to.
Reader [Jimmy] sent us some info about his recently completed antique radio to audio streamer conversion. The electronics from the original radio were too far gone to repair, but he took the time to pull apart modern components to provide a polished looking finished project without losing the antique feel. We like it, but we are just suckers for that old time look. Check out his blog for more photos.
Not too long ago we asked our readers what they would like to hear about from the PUSH N900 winners and their hacks. We got some silly questions, and some serious, we asked both and now the PUSH teams have answered.
The day has passed, the party is gone, and all that’s left is the final interview. The Light Hack Crew gave us a somewhat shorter response then what we were used to, but it turned out to be just as sweet.
[youtube=http://www.youtube.com/watch?v=azfgasnWtW0]
[Robert] wrote a program using Max/MSP that lets him make music with his guitar hero controller. There’s another video after the break where he walks through the various features but here’s the gist of it. This works on Mac and Windows and allows a sort of ‘live play’ or midi mapping mode. In the midi mode each key can be configured to do your bidding. His example uses the pick bar to scroll through different samples and the green button the play them or the red button to stop.
The live mode us much more involved. In the software you choose the type of scale and the key you’d like to play in. This makes up for the controller’s lack of enough frets to make it a chromatic instrument and these settings can be adjust from the controller. There is an up-pick offset that makes the upward movement of the pick bar a different note than the downward movement. The motion control can also be used as an input. He demonstrates pitch bending and cutoff using that method.
This looks like a lot of fun. He needs to team up with [Joran] to add drums to the mix, forming a much more creative rock band than you can buy in the store.
Continue reading “Guitar Hero As An Instrument Or Midi Controller”
In need of a portable power supply, [Alastair] threw some batteries into an Altoids tin. The problem was he didn’t have a holder for these size A23 cells. Inspiration struck and he realized the blister pack they came in fits them snuggly and just needs some conductors to complete the circuit. He pulled some battery contacts from a broken CD player. Using foam-based double-stick tape he added some spring to the contacts and came up with a perfectly sized holder that works wonderfully.
We’ve tried making battery packs by wrapping the entire thing in clods of duct tape. This looks like it works a lot better and there’s still room to fit the batteries and a switch inside of this minty enclosure.
