Showing the end result - a Defender machine copy in all its glory, with a colourful front panel with joysticks.

Defender Arcade Rebuilt To Settle A Childhood Memory

[Jason Winfield] had a nemesis: the Defender arcade machine. Having put quite a number of coins into one during his childhood, he’s since found himself as a seasoned maker, and decided to hold a rematch on his own terms. For this, he’s recreated the machine from scratch, building it around the guts of a Dell laptop, and he tells us the story what it took to build a new Defender in this day and age.

Defender was a peculiar machine — it was in cocktail table format, unlike many other arcade machines of that period. From pictures, he’s redesigned the whole thing in Fusion 360, in a way more desk-friendly format, but just as fancy looking as before.

As for the laptop, gutting it for its mainboard, screen, and speakers was a surprisingly painless procedure — everything booted up first try. A few board-fitted brackets and a swap from a HDD to a USB flashdrive for the OS later, the electronics were ready. As he was redesigning the entire arcade machine anyway, the new design control panel was also trimmed down for ease of use, while preserving the original colorful look.

All in all, an impressive build from [Jason]. After all was set and done, we don’t doubt that he went on to, let’s say, settle some old scores. It’s not the first time we see a desktop-sized arcade cabinet, and you gotta admire the skills making such a machine smaller while sticking to the old-timey aesthetic! Or, perhaps, would you like a cabinet that’s more subtle?

Continue reading Defender Arcade Rebuilt To Settle A Childhood Memory”

Will Carmakers Switch Clay For Computers?

The 3D printing revolution has transformed a lot of industries, but according to [Insider Business] the car industry still uses clay modeling to make life-sized replicas of new cars. The video below shows a fascinating glimpse of the process of taking foam and clay and making it look like a real car. Unlike the old days, they do use a milling machine to do some rough work on the model, but there’s still a surprising amount of manual work involved. Some of the older film clips in the video show how hard it was to do before the CNC machines.

The cost of these models isn’t cheap. They claim that some of the models have cost $650,000 to create. We assume most of that is in salaries. Some models take four years to complete and a ton of clay.

Continue reading “Will Carmakers Switch Clay For Computers?”

PCB Makes 7 Segment Displays

Of course, there’s nothing unusual about using 7-segment displays, especially in a clock. However, [Edison Science Corner] didn’t buy displays. Instead, he fabricated them from a PCB using 0805 LEDs for the segments. You can see the resulting clock project in the video below.

While the idea is good, we might have been tempted to use a pair of LEDs for each segment or used a diffuser to blur the LEDs. The bare look is nice, but it can make reading some numerals slightly confusing.

Continue reading “PCB Makes 7 Segment Displays”

A Hackaday.io page screenshot, showing all the numerous CH552 projects from [Stefan].

All The USB You Can Do With A CH552

Recently, you might have noticed a flurry of CH552 projects on Hackaday.io – all of them with professionally taken photos of neatly assembled PCBs, typically with a USB connector or two. You might also have noticed that they’re all built by one person, [Stefan “wagiminator” Wagner], who is a prolific hacker – his Hackaday.io page lists over a hundred projects, most of them proudly marked “Completed”. Today, with all these CH552 mentions in the Hackaday.io’s “Newest” category, we’ve decided to take a peek.

The CH552 is an 8-bit MCU with a USB peripheral, with a CH554 sibling that supports USB host, and [Stefan] seriously puts this microcontroller to the test. There’s a nRF24L01+ transceiver turned USB dongle, a rotary encoder peripheral with a 3D-printed case and knob, a mouse wiggler, an interface for our beloved I2C OLED displays, a general-purpose CH55x devboard, and a flurry of AVR programmers – regular AVRISP, an ISP+UPDI programmer, and a UPDI programmer with HV support. Plus, if USB host is your interest, there’s a CH554 USB host development board specifically. Every single one of these is open-source, with PCBs designed in EasyEDA, the firmware already written (!) and available on GitHub, and a lovingly crafted documentation page for each.

[Stefan]’s seriously put the CH552 to the test, and given that all of these projects got firmware, having these projects as examples is a serious incentive for more hackers to try these chips out, especially considering that the CH552 and CH554 go for about 50 cents a piece at websites like LCSC, and mostly in friendly packages. We did cover these two chips back in 2018, together with a programming guide, and we’ve seen things like badges built with its help, but having all these devices to follow is a step up in availability – plus, it’s undeniable that all the widgets built are quite useful by themselves!

Daniel Valuch Chats About CERN’s High Caliber Hacking

For those of us who like to crawl over complex systems, spending hours or even days getting hardware and software to work in concert, working at places like NASA or CERN seems like a dream job. Imagine having the opportunity to turn a wrench on the Space Shuttle or the Large Hadron Collider (LHC) — not only do you get to spend some quality time with some of the most advanced machines ever produced, you can be secure in the knowledge that your work will further humanity’s scientific understanding of the universe around us.

Or at least, that’s what we assume it must feel like as outsiders. But what about somebody who’s actually lived it? What does an actual employee, somebody who’s had to wake up in the middle of the night because some obscure system has gone haywire and stalled a machine that cost taxpayers $4.75 billion to build, think about working at the European Organization for Nuclear Research? Continue reading “Daniel Valuch Chats About CERN’s High Caliber Hacking”

The Curved Nature Of Time Clock

While we’re told that space-time curves, we aren’t sure that was what [andrei.erdei] was going for when he built a great-looking curved LED clock. The LEDs are courtesy of a strip of 84 WS2812 smart LEDs, the curve comes from a 3D printed part, and a Wemos D1 mini provides the brains.

Like all of our favorite clocks, this one has a unique way of displaying the time. If you find the description in the post hard to understand, the video below makes it a bit easier to wrap your head around. Note the time appears in the top left corner of the video in several cases — so you can check to see if you’re reading it correctly.

The secret sauce, of course, is the curved plastic grid that holds the LEDs. Because of the unusual shape, supports are a must and there are notes in the post about the settings used to get the best results. With 84 LEDs, the software has to be careful not to turn them to full brightness at one time, or else the clock would need a 6 amp power supply. Instead, the software limits the brightness to a little less than half of the maximum. No LED is ever white, and not all LEDs are on at once. The clock works easily, according to [andrei], with a 2 A supply. The clock has a WiFi connection where you can set things up easily.

Overall, a nice-looking project that would look at home on a science fiction movie set. We’ve seen color clocks before. If you want to economize on LEDs, we’ve seen a clock with only five!

Continue reading “The Curved Nature Of Time Clock”

Supercon 2022: Michael Whiteley Saves The Badge

Michael Whiteley (aka [compukidmike]) is a badgelife celebrity. Together, he and his wife Katie make up MK Factor. They have created some of the most popular electronic conference badges. Of course, even experts make mistakes and run into challenges when they dare to push the envelope of technology and delivery schedules. In his Supercon 2022 talk, There’s No Rev 2: When Badgelife Goes Wrong, Mike shares details from some of his worst badge snafus and also how he managed to gracefully pull them back from the edge of disaster.

Living the Badgelife

Attendees at the world’s largest hacker convention, DEF CON in Las Vegas, had already become accustomed to receiving and wearing very cool and novel admission tokens, more properly known as badges. Then in 2006, at DEF CON 14, everything changed. Designed by Joe Grand, the first electronic DEF CON badge was a circuit board featuring a tiny PIC microcontroller, two LEDs, and a single pushbutton. Badgelife was born.

DEF CON 30 Humans Sampling Board

Mike begins his war stories with one about the DEF CON 30 badge. This was a herculean project with 25,000 badges being produced on a short timeline in the ever-changing chaos of a semiconductor supply-chain meltdown. Even though many regard it as one of the best DEF CON badges ever made, the DC30 badge posed a number of challenges to its creators. Microcontrollers were in short supply during 2021 and 2022 forcing the badge team to keep an eye on component vendor supplies in order to snipe chips as soon as they appeared in stock. The DC30 badge was actually redesigned repeatedly as different microcontrollers fluctuated in and out of supply. Continue reading “Supercon 2022: Michael Whiteley Saves The Badge”