Cheap Wooden Hexapod Frame Greatly Reduces Cost

May 17, 2012 by Caleb Kraft 6 Comments

[Balline] really wanted to play with a hexapod but found the cost to be prohibitive. Being a mechanical engineer, he was able to fairly quickly come up with a stable 3 servo design that would allow him to experiment with the platform. He chose to use wood as the construction material to help reduce costs even more. As you can see in the video after the break, his design gets around fairly well. His cost for the whole thing, including the 3 servos, the basic stamp hobby board, the recycled batteries, and the frame, was under $100.

This is a great system to start with, though he unfairly compares the cost to the dancing ones he had seen in the past. C’mon, your bot ain’t no [Lou Vega]. It is still pretty cool though.

Continue reading “Cheap Wooden Hexapod Frame Greatly Reduces Cost” →

Building A Ranque-Hilsch Vortex Cooling Tube

May 17, 2012 by Caleb Kraft 44 Comments

The Ranque-Hilsch vortex tube is an interesting piece of equipment. It can, without any moving parts or chemicals, separate hot and cold compressed gasses that are passed through it. Interestingly enough, you can cobble one together with very few parts for fairly cheap. [Otto Belden] tossed one together in a weekend back in 2009 just to see if he could do it. His results were fairly good and he shared some video tutorials on its construction.

His latest version, which you can see in the video below, takes compressed air at about 78degrees and spits out about 112degrees on the hot side and 8degrees on the cold side. Not too bad!

Continue reading “Building A Ranque-Hilsch Vortex Cooling Tube” →

Making A Miniature X-Ray Tube From Scratch

May 17, 2012 by Caleb Kraft 39 Comments

We know that most of you will have no reason to ever make a miniature X-ray tube. However, we also know that many of you will find this video mesmerizing like we did. [Glasslinger] does a fantastic job of explaining the entire process of creating the mini x-ray tube from, procuring the uranium glass and tungsten stem, creating the filament from scratch, all the glass work, and the testing.

Admittedly, most of us here at hackaday won’t go any further than admiring the craftsmanship, though we’re curious to see what [Adam Munich] has to say when he sees this story.

If you enjoyed the tube construction in the video, be sure to check out [Glasslinger’s] other videos. He makes all kinds of tubes in his shop and usually shares so much information along the process that each one has useful information beyond that particular project. Another crazy part is that he has made most of his own tools, including his glass lathe.

We really shouldn’t have to point out that X-Rays are dangerous. Don’t mess with them unless you have researched how to do it safely.

Tron Costume Fits Nice And Snug

May 17, 2012 by Caleb Kraft 12 Comments

We’ve seen our fair share of Tron costumes and props, but much like [Sean-h] points out, they are usually pretty bulky and baggy. He’s gone a slightly different route by starting with a wetsuit instead of bulkier items like leather jackets. The lighting is done in the same manner we’ve seen before, copious amounts of EL wire and EL tape. The additional layers of this costume were made from foam, so they could be fairly form fitting as well.

[Sean-h] points out that there are some downfalls to his design. The wetsuit, while looking great, gets pretty hot while indoors and the foam layers have a tendency to detach if you move around too much. We think it looks great though. Good job [Sean-H]

Solidoodle, A $500 3d Printer

May 16, 2012 by Caleb Kraft 69 Comments

3D printers are very popular right now. We’ve seen them go from an interesting project to multiple commercial entities. Makerbot seems to be the poster child for the commercial side of things, at least they were. Their former COO [Samuel Cervantes] is now in charge of a new company called Solidoodle. Their main product is a complete 3d printing kit for $499. You supply power and a computer.

The Solidoodle is capable of building things 6″x6″x6″. The quality seems to be comparable to most of the others we’ve seen. They tout a .1mm layer thickness in HD mode (makerbot shows .2-.3mm). Not bad considering it is less than 1/3 the price of the makerbot replicator with a single extruder. The video after the shows it in action, as well as both with the optional case and door and without.

Cardboard Kinetic Creatures

May 16, 2012 by Caleb Kraft 7 Comments

Browsing around today, I saw this little kit on kickstarter called Kinetic Creatures. These flat packed models are made from cardboard and can be assembled without tools. Their mechanical legs are operated either by a simple cam that you turn by hand or by a motorized attachment. I love the basic idea here. This is the kind of thing that my 6 year old would really enjoy doing that also serves to get him into making things (he’d probably insist on motorizing it with scraps, he collects dc motors and has quite a collection).

I did notice that they mentioned using it as a robotic platform, adding custom electronics to the empty space allowed in the body of the animal. This initially got me quite excited, thinking that I could, for $30 have a 1 foot tall quadruped platform that looked awesome, then I realized it can’t turn. I guess I’ll have to hack it a little bit to put separate drives in for each side. That would be a cool upgrade they could offer.

Have any of you tried to do turning with a set of only 4 [jansen] legs before?

Constant Current Dummy Load

May 15, 2012 by Caleb Kraft 13 Comments

Inspired by a design he saw on the EEVblog, [George Graves] put together this constant current dummy load. You might need on of these if you’re testing power supplies or batteries. They pull a constant current regardless of the voltage of the supply. [George’s] version extends the range of the original a little bit by running the op-amp at 8 volts. He says that everything runs fine at 1 amp. He tried 2 amps but things got hot pretty quickly. What we really like though, is he took fantastic pictures. Sometimes even simple things can catch our attention with the right pictures!