Driving An LCD Character Display Using Custom HID Codes

October 23, 2012 by Mike Szczys 19 Comments

Here’s an external display meant to help you keep track of your computer’s status. It connects via USB and is driven by a PIC microcontroller. It listens for a small set of commands, using those to implement a simple control protocol to drive the screen.

[Andrew Gehringer] designed the device around a PIC 18F2550, which offers native USB control. He’s using Microchip’s USB stack to enumerate the module as an HID device. It listens for commands 0x10 through 0x23. These clear the display, write strings to each of the four lines of the display, and switch the LCD backlight. Of course the project includes a program [Andrew] wrote to feed the display. It has a GUI which let’s him decide what information is displayed and how it is formatted. This helper app hangs out in the system tray for easy access.

Hacking Facebook To Remove The Social Value Facade

October 23, 2012 by Mike Szczys 20 Comments

We see [Ben Grosser’s] point that all the metrics found on the Facebook user interface make the experience somewhat of a game to see if you can better your high score. He thinks this detracts from the mission of having social interactions that themselves have a value. So he set out to remove the ‘scores’ from all Facebook pages with a project he calls the Facebook Demetricator.

You can see two UI blocks above. The upper offering is what a normal user will see. The lower is the page seen through the lens of the Demetricator. [Ben’s] feels it doesn’t matter how many people like something or share something, but only that you are genuinely interested in it. With the numbers removed you’re unlikely to follow the herd mentality of only clicking through to things that are liked by a huge number of people. He explains this himself in the clip after the break.

The Demetricator works much like the Reddit Enhancement Suite. It’s a browser add-on for Chrome, Firefox, and Safari that selectively strips out the metrics as the page renders.

Brute Force Used To Crack A Key Logger’s Security Code

October 23, 2012 by Mike Szczys 29 Comments

The USB device seen plugged in on the right of this image was found in between the keyboard and USB port of the company computer belonging to a Senior Executive. [Brad Antoniewicz] was hired by the company to figure out what it is and what kind of damage it may have done. He ended up brute forcing an unlock code to access the device, but not before taking some careful steps along the way.

From the design and placement the hardware was most likely a key logger and after some searching around the Internet [Brad] and his colleagues ordered what they thought was the same model of device. They wanted one to test with before taking on the actual target. The logger doesn’t enumerate when plugged in. Instead it acts as a pass-through, keeping track of the keystrokes but also listening for a three-key unlock code. [Brad] wrote a program for the Teensy microcontroller which would brute force all of the combinations. It’s a good thing he did, because one of the combinations is a device erase code hardwired by the manufacturer. After altering the program to avoid that wipe code he successfully unlocked the malicious device. An explanation of the process is found in the video after the break.

Continue reading “Brute Force Used To Crack A Key Logger’s Security Code” →

Scratch-built Motor Uses A Clever Design

October 23, 2012 by Mike Szczys 17 Comments

[Lou] is on a hot streak when it comes to interesting builds. This time around he made his own motor using wood, PVC, some fasteners, and a bunch of enameled wire.

His method of building a commutator is intriguing. He first builds a rotor by cutting two opposing sides off of a PVC four-way connector and pushing a short galvanized pipe through what’s left. After adding two PVC nubs with caps and nails as pivot points he wraps the PVC and metal pipe with a continuous length of enameled wire. The enamel is then sanded off the windings around the PVC, and half is covered with electrical tape. The spinning rotor will cause the brushes to contact the bare wire during half of the rotation, and be insulated by the tape during the other half. The video after the break shows the motor in action, then walks you through each step of the build.

If you liked this video you should check out [Lou’s] water bottle rocket launcher, or his automated Ping Pong table topper which stores the game in the ceiling.

Continue reading “Scratch-built Motor Uses A Clever Design” →

.NET For The STM32 F4 Discovery Board

October 23, 2012 by Mike Szczys 29 Comments

Here’s a technique that will let you use the .NET framework on an STM32 Discovery board. [Singular Engineer] was happy to learn that the .NET Micro Framework had been ported for STM32 chips. It’s doesn’t look like the port has hit a stable version yet, but these instructions will be enough to get you up and running. This lets you use managed code in the C# language to program an embedded device: the STM32 F4 Discovery board.

After flashing a new bootloader to the board a driver needs to be added for Windows to communicate with it. Above you can see that the board will enumerate as ‘STM32 .Net Test’. Once the driver is installed the rest of the firmware can be loaded on the board using a GUI supplied with the NETMF for STM32 package. That takes care of prepping the hardware, the rest is a painless process of configuring Visual Studio to use the board as a target. The ‘Hello World’ application then uses C# to blink an LED.

Traffic Camera Countermeasure

October 23, 2012 by Mike Szczys 212 Comments

Don’t get us wrong, we drive very carefully as it’s the most dangerous thing we do on a regular basis. But even a careful driver can get caught by bad traffic and a red light camera. These are devices that monitor intersections. If you get caught in the middle when the light goes red they take a picture and you get a ticket in the mail. Well, that’s the way it used to be. This traffic camera countermeasure puts it to an end. As you can see, the noPhoto uses a flash of its own to overexpose traffic camera images.

The image above shows the prototype. The foil is reflecting a flash on either side onto the license plate using a flash sensor which acts as the trigger. According to the demo video after the break, the system can even defeat the pre-flash, and dual-photo types of cameras.

There are pretty tight restrictions on using lights on your vehicles (colors, placement, etc.). We wonder if this passes muster?

Continue reading “Traffic Camera Countermeasure” →

A TTL Timer Project Of Yore

October 22, 2012 by Mike Szczys 6 Comments

[Viktor] just pulled out another one of his decades-old projects. This time around it’s a timer he built using 7400 logic chips. It was a great way for him to learn about electronics, and ended up serving as his alarm clock every morning.

Two pieces of copper clad board were cut to the same size. One of them was etched to act as the circuit board. The other was outfitted as a face plate. The same type of transfer sheets used to mask the traces of the circuit were also used to apply labels to the face plate. It was then coated with acrylic spray to protect it and stave off corrosion. The clock keeps time based on a half-wave rectified signal. The source is from a transformer which steps mains voltage down to a safe level for the 7805 regulator that supplies the clock’s power bus.

We’re glad [Viktor] has been showing off these old projects. We’ve also enjoyed seeing a TV sleep timer he built. If you’ve got something neat for yester-year why not dust it off, post the details, and send us a tip about it?