Handheld PC Looks Great

May 22, 2023 by Al Williams 13 Comments

[Bytewelder] fondly remembers the Palm III and Sharp HC-4500, so taking on the design of Decktility, a custom handheld cyberdeck , was a natural next step. The blog post goes into much detail about the design decisions and challenges throughout the project. The end result, though, looks great.

The device uses a Raspberry Pi CM4 and an IPS touchscreen. The bulk of the design work was to get the power system working. There is a custom FET board and an Arduino that manages charging and battery state.

Continue reading “Handheld PC Looks Great” →

Dear Ubuntu…

May 22, 2023 by Jenny List 279 Comments

Dear Ubuntu,

I hope this letter finds you well. I want to start by saying that our time together has been one of creativity and entertainment, a time in which you gave me the tools to develop a new career, to run a small electronics business, make fun things, and to write several thousand articles for Hackaday and other publications, but for all that it’s sadly time for our ways to part. The magic that once brought us together has faded, and what remains is in danger of becoming a frustration.

In our early days as an item you gave me for the first time a Linux distro that was complete, fast, and easy to use without spending too much time at the CLI or editing config files to make things happen; you gave me a desktop that was smooth and uncluttered, and you freed me from all those little utilities that were required to make Windows usable. You replaced the other distros I’d been using, you dual-booted with my Windows machines, and pretty soon you supplanted the Microsoft operating system entirely.

Ubuntu and me and a trusty Dell laptop, Oxford Hackspace, 2017. — Me and Ubuntu in 2017, good times.

We’ve been together for close to two decades now, and in that time we’ve looked each other in the eye across a variety of desktop and laptop computers. My trusty Dell Inspiron 640 ran you for over a decade through several RAM, HDD, and SSD upgrades, and provided Hackaday readers with the first few years of my writing. Even the Unity desktop couldn’t break our relationship, those Linux Mint people weren’t going to tear us asunder! You captured my text, edited my videos and images, created my PCBs and CAD projects, and did countless more computing tasks. Together we made a lot of people happy, and for that I will always be grateful. Continue reading “Dear Ubuntu…” →

Design For 3D Printing Hack Chat

May 22, 2023 by Dan Maloney No comments

Join us on Wednesday, May 24 at noon Pacific for the Design for 3D Printing Hack Chat with Eric Utley!

Like a lot of enabling technologies, 3D printing has had a strange trajectory. It started out as a laboratory oddity, moved on to industrial applications, and finally filtered down to the DIY set, first as scratch-built machines and later as inexpensive commodity printers that can be found almost anywhere. Pretty much everyone who needs a 3D printer now has one.

Not all additive manufacturing technologies are created equal, though, and there are plenty of applications for 3D printed parts where FDM just won’t cut it. Luckily, any of us can get access to the latest and greatest manufacturing technologies through job houses that specialize in everything from metal 3D printing to sheet metal fabrication, CNC machining, and even small-run injection molding. We may not be able to afford any of the machines, but in a lot of cases we can afford to rent time of them and get high-quality parts quickly.

But that raises another question: Is my design ready for printing? What works on an Ender on your shop bench might not quite translate to the latest SLS printer, and sending off an iffy design could just end up wasting time and money. Whether you’re sending your designs out and running them up on your own printer, you want to know what you’re doing will work. That’s why we’ve asked Eric Utley, an applications engineer with Protolabs, to stop by the Hack Chat. With 12 years of additive manufacturing experience, he’ll be able to help you tune up your designs and make sure they’re ready to print.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, May 24 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

Click that speech bubble to the right, and you’ll be taken directly to the Hack Chat group on Hackaday.io. You don’t have to wait until Wednesday; join whenever you want and you can see what the community is talking about.

Hoverboard Rides On Eddy Currents

May 22, 2023 by Bryan Cockfield 32 Comments

The famous hoverboards of Back to the Future haven’t quite gotten here yet, but that hasn’t stopped anyone with a unique personal vehicle from using the name any time they need some quick marketing. The self-balancing scooter trend of the mid-2010s was the best example of this in recent memory, but there are also water-propelled platforms that use the popular name as well as a myriad of other more skateboard-like devices that never got off the ground at all. This project from [Damien Dolata], on the other hand, might be the most authentic prototype we’ve seen compared against the fictional version presented in the movie.

The hoverboard uses a set of rotating magnets, referred to in this build as magneto-rotational repulsors, which spin up to an extremely high rotational speed underneath the board. When above a metal surface, the spinning magnets generate eddy currents in the metal beneath them which create the strong magnetic field needed to levitate the board. Unlike the Lexus hoverboard system which used supercooling magnets, this is a much more affordable way of producing magnetic fields but is a little bit more complicated due to the extra moving parts.

As this is still in the prototyping stages, it has only been able to lift around 30 kg and hasn’t been tested in motion yet, but there are two small turbines built into the hoverboard to generate thrust whenever [Damien] gets to that point. It would require a larger metal surface to move across as well, which might be the main reason why it hasn’t been tested this way yet. For any native French speakers taking a look at this project, be sure to fill in any of our gaps in the comments below, and for other ways that eddy currents have been used in transportation take a look at this bicycle that uses them in its drivetrain.

Continue reading “Hoverboard Rides On Eddy Currents” →

AirTags, Tiles, SmartTags And The Dilemmas Of Personal Tracking Devices

May 22, 2023 by Maya Posch 18 Comments

In an ideal world we would never lose our belongings, and not spend a single hour fruitlessly searching for some keys, a piece of luggage, a smartphone or one of the two dozen remote controls which are scattered around the average home these days. Since we do not live in this ideal world, we have had to come up with ways to keep track of our belongings, whether inside or outside our homes, which has led to today’s ubiquitous personal tracking devices.

Today’s popular Bluetooth-based trackers constantly announce their presence to devices set up to listen for them. Within a home, this range is generally enough to find the tracker and associated item using a smartphone, after which using special software the tracker can be made to sound its built-in speaker to ease localizing it by ear. Outside the home, these trackers can use mesh networks formed by smartphones and other devices to ‘phone home’ to paired devices.

This is great when it’s your purse. But this also gives anyone the ability to stick such a tracker device onto a victim’s belongings and track them without their consent, for whatever nefarious purpose. Yet it is this duality between useful and illegal that has people on edge when it comes to these trackers. How can we still use the benefits they offer, without giving stalkers and criminals free reign? A draft proposal by Apple and Google, submitted to the Internet Engineering Task Force (IETF), seeks to address these points but it remains complicated.

Continue reading “AirTags, Tiles, SmartTags And The Dilemmas Of Personal Tracking Devices” →

ChatGPT Rules The World… Or, At Least, The Home

May 22, 2023 by Al Williams 17 Comments

With all the hype about ChatGPT, it has to have crossed your mind: how can I make it control devices? On the utopia side, you could say, “Hey, ChatGPT, figure out what hours I’m usually home and set the thermostat higher when I am away.” On the dysfunctional side, the AI could lock you in your home and torment you like some horror movie. We aren’t to either extreme yet, but [Chris] couldn’t resist writing a ChatGPT plugin to control a Raspberry Pi. You can see a video of how it turned out below.

According to [Chris], writing a ChatGPT plugin is actually much simpler than you think. You can see in the video the AI can intuit what lights to turn on and off based on your activity, and, of course, many more things are possible. It can even detect snoring.

Continue reading “ChatGPT Rules The World… Or, At Least, The Home” →

The Wizard Of Semiconductors

May 22, 2023 by Al Williams 19 Comments

If you have three hours and you want to learn the fundamentals of semiconductors, [Tiny Tapeout] has something for you: An introduction to SiliWiz. You’ll also need the SiliWiz software (or use it online), which resembles the kind of tools that chip designers use but is meant for students to use as a learning tool

Using SiliWiz, you create layers on a virtual device, and you can use Spice to view the results. The tutorial is meant to be high-level and is suggested for students aged 14 or over (but we liked it and we are quite a bit older than that). Some more advanced material is also available at the same site.

Continue reading “The Wizard Of Semiconductors” →