Communicating With Satellites Like It’s 1957

When the first artificial satellite, Sputnik, was put into orbit around Earth, anyone in the path of the satellite could receive the beeps transmitted by the satellite provided they had some simple radio equipment. Of course, there was no two-way communication with this satellite, and it only lasted a few weeks before its batteries died. Here in the future, though, there are many more satellites in orbit and a few are specifically meant for ham radio operators. And, like the ’50s, it doesn’t take too much specialized equipment to communicate with them, although now that communication can be two-way.

The first step in this guide by [W2PAK] is to know where these satellites are in the sky. The simplest way to do that is to use a smartphone app called GoSatWatch and, when configured for a specific location, shows the satellites currently overhead. After that it’s time to break out the radio gear, which can be surprisingly inexpensive. A dual-band handheld is required since satellite uplink and downlink can be on different bands, and the antenna can be made from simple parts as well as [W2PAK] demonstrates in a separate video. Combined, this can easily be done for less than $100. [W2PAK] also goes over the proper format and etiquette for a satellite contact as well, so a new operator can pick it up quickly.

Using satellites as repeaters opens up a lot of capabilities when compared to terrestrial communications. Especially for operators with entry-level licenses who are restricted to mostly VHF and UHF, it adds a challenge as well as significantly increased range compared to ground-based repeaters and line-of-sight communications. There are plenty of activities around satellites that don’t require a license at all, too, like this project which downloads weather imagery from weather satellites.

Continue reading “Communicating With Satellites Like It’s 1957”

Examining The Vulnerability Of Large Language Models To Data-Poisoning

Large language models (LLMs) are wholly dependent on the quality of the input data with which these models are trained. While suggestions that people eat rocks are funny to you and me, in the case of LLMs intended to help out medical professionals, any false claims or statements dripping out of such an LLM can have dire consequences, ranging from incorrect diagnoses to much worse. In a recent study published in Nature Medicine by [Daniel Alexander Alber] et al. the ease with which this data poisoning can occur is demonstrated.

According to their findings, only 0.001% of training tokens have to be replaced with medical misinformation to order to create models that are likely to produce medically erroneous statement. Most concerning is that such a corrupted model isn’t readily discovered using standard medical LLM benchmarks. There are filters for erroneous content, but these tend to be limited in scope due to the overhead. Post-training adjustments can be made, as can the addition of RAG, but none of this helps with the confident bull excrement due to corruption.

The mitigation approach that the researchers developed cross-references LLM output against biomedical knowledge graphs, to reduce the LLM mostly for generating natural language. In this approach LLM outputs are matched against the graphs and if LLM ‘facts’ cannot be verified, it’s marked as potential misinformation. In a test with 1,000 random passages detected issues with a claimed effectiveness of 91.9%.

Naturally, this does not guarantee that misinformation does not make it past these knowledge graphs, and largely leaves the original problem with LLMs in place, namely that their outputs can never be fully trusted. This study also makes it abundantly clear how easy it is to corrupt an LLM via the input training data, as well as underlining the broader problem that AI is making mistakes that we don’t expect.

Illustrated Kristina with an IBM Model M keyboard floating between her hands.

Keebin’ With Kristina: The One With The Keyboard Configurator

Have you ever wished you could experiment with different layouts super easily, just by adding or removing a few switches here and there and printing a new case? Well, [heyisjambo] says that it’s more than possible with menura, the modular keyboard system.

A collage of menura keyboards, which are modular via the VIK standard.
So many lovely options! Image by [heyisjambo] via GitHub
[heyisjambo] is happy with 36 keys, but is reduced-count-curious and wanted a way to explore without a lot of wasted time and PCBs.

At the same time, [heyisjambo] wanted to experiment with split vs. uni-body construction, and especially the different shapes that are possible when tweaking the angle and distance between them.

And as if that weren’t enough, there’s support for [Sadek Baroudi]’s VIK standard for interfacing data between PCBs, which calls for an FPC 12-pin, 0.5 mm pitch connector and allows for ultra-cool magnetic connectors. This way, you can easily add things like displays, trackpads, and trackballs in the between the halves.

Thanks for the tip, [calculus]!

Continue reading “Keebin’ With Kristina: The One With The Keyboard Configurator”

Underwater Robotics Hack Chat

Join us on Wednesday, February 5 at noon Pacific for the Underwater Robotics Hack Chat with Tony White!

Almost anywhere you look, there’s a good chance you can see a robot at work. Whether they’re sweeping your floors, delivering a snack, building a car, or even driving one, robots are everywhere on this planet. And since over 70% of this planet is covered in water, it makes sense that robots should be there, too. Getting a robot to work underwater at all is one thing, but getting it to work underwater reliably can be quite a challenge. Water always finds a way to ruin your day, after all, and this reality only worsens when you add a little salt into the mix.

join-hack-chatTony White knows the marine engineering field well, having worked in the space for over a decade. He’s currently an applications engineer at Blue Robotics, where he’s worked on everything from full-size autonomous surface vessels to underwater swarm robots. He’s stopping by the Hack Chat to talk about the harsh engineering realities of underwater automation, so if you’ve ever wanted to take the plunge, you’ll want to come to this Hack Chat for sure.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, February 5 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

 

A Cordless Soldering Iron With A Difference

Many decades ago, when soldering was an activity more often associated with copper fabrication than with electronics, a soldering iron would have been a large lump of copper on a shaft with a wooden handle. You would heat it in a gas flame, and use its pointed end for your soldering. Electric irons have made this a thing of the past, but the basic idea is still one with some merit. [Shake the Future] is here with a modern take on such an iron, one that is heated in the microwave oven.

The business end of the iron is a normal soldering iron bit, but behind it is a piece of sintered silicon carbide wrapped in ceramic fibre and covered with Kapton tape and a high-temperature-resin 3D printed shield. On the back of that is a 3D-printed handle. The whole thing is put in the microwave oven for a few tens of seconds to heat to temperature, and thereafter, you have however long the thermal mass of the silicon carbide holds the temperature in which to do your soldering.

It’s an interesting idea that we can see has some use in situations where you need an iron for a quick job away from your bench but within reach of the kitchen. We like the lateral thinking, and it’s certainly fascinating to see the construction. But in an age of USB-C power packs and irons we have more convenient soldering on the go, so we’re not sure how useful it would be to us.

Silicon carbide is an interesting material, it’s not the first time we’ve written about it being used in a high temperature application.

Continue reading “A Cordless Soldering Iron With A Difference”

USB Hub-A-Dub-Dub: Weird Edge Cases Are My Ruin

The Universal Serial Bus. The one bus to rule them all.  It brought peace and stability to the world of computer peripherals. No more would Apple and PC users have to buy their own special keyboards, mice, and printers. No more would computers sprout different ports for different types of hardware. USB was fast enough and good enough for just about everything you’d ever want to plug in to a computer.

We mostly think of USB devices as being plug-and-play; that you can just hook them up and they’ll work as intended. Fiddle around around with some edge cases, though, and you might quickly learn that’s not the case. That’s just what I found when I started running complicated livestreams from a laptop…

Continue reading “USB Hub-A-Dub-Dub: Weird Edge Cases Are My Ruin”

BLE Rain Gauge Sips Water And Batteries

It isn’t that hard to make an electronic rain gauge if you have a steady source of power or you don’t mind changing batteries often. But [Matthew Ford] offers a third option: a simple device with a Bluetooth Low Energy (BLE) module that can get a few years of a pair of AA batteries.

The approach has several advantages. Batteries make the device self-contained, and changing them infrequently is an obvious win. In addition, the BLE allows the device to be wireless and send data directly to an Android device. Thanks to a WH-SP-RG rain gauge, there’s not much to that part. The smart part is an nRF52832 module and some minor parts. The phone side uses an off-the-shelf Android app.

In a project like this, it is critical to have timers that really put the CPU to sleep. [Matthew] had to modify the Arduino libraries to allow the lp_timer objects to make it to an hour. Without the modifications, the timer can only reach 8.5 minutes. Sure, you could stack them, but that means taking a power hit multiple times an hour which would affect battery life.

Not the most complex project, but more complexity would mean lower battery life, so — as they say — less is more. We couldn’t help but think that with rechargeable batteries and a small solar panel, this could last a very long time.

LoRa, of course, is another choice. You can make 3D print a tipping bucket device, too.