Structured Light 3d Scanner

After futzing around with a cheap pico projector, a webcam and a little bit of software, [Jas Strong] built herself a 3d scanner.

In spite of the dozens of Kinect-based scanner projects, we’ve seen structured light 3d scanners before. This method of volumetric scanning projects a series of gradient images onto a subject. A camera captures images of the patterns of light and dark on the model, math happens, and 3d data is spit out of a computer.

[Jas] found a Microvision SHOWWX laser pico projector on Woot. The laser in the projector plays a large part in the quality of her 3d models – without a focus, [Jas] can get very accurate depth information up close. A Logitech webcam modified for a tighter focus handles the video capture responsibilities. The software side of things are a few of these structured light utilities that [Jas] melded into a single Processing sketch.

The results are pretty remarkable for a rig that uses woodworking clamps to hold everything together. [Jas]’ 3d model of her cat’s house looks very good. She’s got a few bugs to work out in her setup, but [Jas] plans on releasing her work out into the wild very soon. We’ll update this post whenever that happens. made her code available here. The code requires the ControlP5 and PeasyCam libraries.

RF Sniffing On-the-go

It’s been a while since we checked in on [Travis Goodspeed]. His latest post makes RF sniffing with the Next HOPE badge more portable by ditching the need to display data on a computer. He’s built on the work he did at the beginning of the year, replacing the FTDI chip on the badge with a Bluetooth module. Now he can use his Nokia N900 as a GoodFET terminal to not only display the packets pulled from the air, but the control the badge as well.

Previously, the client running on the computer was communicating with the badge via a serial connection. To get it working on the N900 [Travis] transitioned from using py-serial over to using py-bluez. All of the code changes are available from the GoodFET repository.

He’s got a few other tricks planned for this concept. He put in a parts order to add Bluetooth to the Girltech IM-ME. The pretty pink pager has the same radio chip on board, so adding Bluetooth connectivity will allow it to be used in the same way. There are also plans in the works to add a couple other packet sniffing protocols to the bag of tricks, including ZigBee.

Burning Man 2011: Christopher Schardt’s Garden Of Rockets

This is one piece I regret to have missed this year at Burning Man, however I certainly heard tales from any one who stumbled across it. [Christopher Shardt]’s Garden of Rockets consists of three kinetic fire art pieces with spinning propane rockets that you can control!

[Christopher] decided to incorporate his Burning Man 2010 project, 4pyre², which is a 12 foot pipe with opposing propane fueled rockets on each end. Onlookers can control the amount of propane fed to the rockets and twist the pipe they are attached to causing the whole thing to spin around like an out of control fire hose. Accompanying 4pyre² is  PyreGoRound, and  Pyroticulation which are two variants on 4pyre²’s concept of spinning rocket bars. [Christopher] was lucky enough to have his project materials funded by Burning Man, but added three thousand dollars (!) in propane to the mix out of pocket.

Check out a video of the project after the jump, and [Christopher]’s site for details and schematics.

Continue reading “Burning Man 2011: Christopher Schardt’s Garden Of Rockets” →

Weekly Roundup 10/8/11

In case you missed them the first time, here are our most popular posts from the past week.

Our most popular post this week is about a clock modeled after Lord Vetinari’s clock in Discworld that ticks at random intervals but keeps accurate time.

Our next most popular post is of a project that takes two 3.5″ floppy drives and uses them to play the Imperial March from Star Wars.

Next we have a post about a way to jam WiFi by sending out deauthentication packets.

Fourth in our list is a post about some really interesting turn signals and other lights that [StarfireMX] created for his car that are chock full of RGB LEDs. This allows them to do all sorts of interesting things other than just blinking.

Finally, we had a post about a robot that has some really interesting ‘wheels’ that aren’t like anything that we have seen before. They are something between an omniwheel and a tank tread and look like they would be fun to play with.

Sustainability Hacks: Wind Turbine Generator

With a little bit of thought put into the build, a wind turbine generator can be one of the greenest ways to generate electricity. Wind power doesn’t require a semiconductor fab lab (unlike solar panels) and doesn’t have very many environmental consequences (unlike hydro power). The Tech Junkies put up a build log of a wind turbine that ended up being a very easy build.

In the interests of sustainability, The Tech Junkies found an old 1.5 HP DC treadmill motor. After measuring the voltage output when the motor was connected to a lathe, they discovered the power output was very linear. With a little bit of calculations, they realized they needed about 1000 RPM to get 20 Volts out of the motor. The team connected an inverter (it’s always cool seeing a power meter run backwards) and started fabricating the blades.

The team found a wealth of info on blade design on this site and following a few guidelines made six blades out of 8″ diameter PVC pipe. An aluminum hub was fabricated and the whole shebang was put on top of a found steel frame.

The Tech Junkies’ build produces 10 Watts of power but they’re looking to increase that to 500 W with the appropriate gearing. A great build that harkens back to this awesome webpage about turbine building and living off the grid.

Win A Laser Cutter By Playing With Light

Buildlounge and Full Spectrum Laser have decided to give away a laser cutter to whoever comes up with the best project involving light.

The contest is in part sponsored by  adafruit industries. The focus of the contest is light – just design something around light, submit it, and you’re in the drawing for your own laser cutter. A solar oven, photophone, solar fiber-optic lighting and hacking apart an old overhead projector are suggested on the contest page, but the winning project will probably be much cooler.

Entries are due by January 1st. First prize is Full Spectrum Laser’s 40 Watt laser cutter, second is an awesome green laser pointer from Wicked Lasers, and third prize is an EL wire starter kit from Adafruit. Entries are due by January 1st, so we expect to see a lot of awesome submissions on the Hack A Day tip line between now and New Years.

Adafruit Celebrates Ada Lovelace Day

ada_lovelace_day

If you weren’t aware, today is [Ada Lovelace] day, so [Ladyada] and Adafruit Industries are spending the day celebrating the achievements of women in the fields of technology, art, engineering, and electronics. Specifically, the focus is on fellow female makers/hackers who are helping shape and promote the industry.

Once every hour, Adafruit Industries is profiling one influential woman, paying tribute to her work and contributions to the tech/maker/art/science space. You’ll see a lot of familiar faces throughout the day, including electronics extraordinaire [Jeri Ellsworth], Make’s own [Becky Stern], as well as [Sherry Huss] and [Louise Glasgow], two of Maker Faire’s leading ladies.

The bios are certainly worth taking a look at – aside from some of the more familiar faces, it’s a great chance to learn about a few makers who you may not have heard of before.

As an added bonus, Adafruit is offering 10% off all purchases from the store using a coupon code that can be found on their site, so be sure to check it out!