Funkytown Performed By Old Hardware

July 13, 2008 by 8 Comments


Inspired by [James Houston]’s remix of Radiohead’s Nude on obsolete hardware, [bd594] put together this mix of Lipps Inc.’s Funkytown. No sampling was used, but he had to loop the footage of the Avaya dot matrix printer’s drum part because it shook the table too much. The guitar and bass line are performed by a Commodore 64. An Intel 14.4 external modem uses DTMF tones for the first part of of the lead and a TI-99/4A beeps out the rest. The TI is also used as a speech synthesizer and a Maxtor harddrive plays the the vocal track.

[via Matrixsynth]

Will It Blend? Tests The IPhone 3G

July 13, 2008 by 27 Comments

[youtube=http://www.youtube.com/watch?v=DLxq90xmYUs&hl=en&fs=1]
The Will It Blend? host, [Tom Dickson], is at it again. This time, he blends the new Apple iPhone 3G. We’re completely in awe of how efficient the blender is at the destruction of electronics, and this time, it’s no different. Watch in fascination (or horror) as [Dickson] turns the latest iPhone into ashes.

[via Neatorama]

FABR: Another 3d Printing Project

July 13, 2008 by 7 Comments


[Lou]’s been working on his own 3d printer: fabr. We find it appealing because the entry cost is quit a bit lower than something like the reprap. 80/20 isn’t that cheap, but you don’t need a large commercial laser cutter to build the chassis. The steppers he used appear to be inexpensive ones that can be salvaged from dot matrix printer. To drive it, he’s working on a custom microstepping board and hopes to eventually develop an Arduino shield to control the stepper drivers. That’s right, it’ll get an Arudino to act as the CNC control interface.

Music And Visual Arts At The Last HOPE

July 12, 2008 by 3 Comments

[Peter Kirn] from Create Digital Music has an article up highlighting many of the great music and visual performance pieces planned for The Last HOPE on Friday night. If you are around New York and not accustomed to hacking conferences, this could be a great excuse to go check it out. Here are some of our favorite projects.

Continue reading “Music And Visual Arts At The Last HOPE” →

HandUSB Data Gloves Interface

July 12, 2008 by 2 Comments

Following today’s earlier post on data gloves, HandUSB is a glove interface designed to relay fingertip touch data to a computer via USB. Although the gloves themselves are not extremely interesting or useful for your average hacker, the project has some good documentation. The electronics are all open source and he has links to the EAGLE files and the AVR Libc code. You can also find a demo program written for DOS. This project uses AVR-USB by Objective Development so if you are looking to move on from your USB-serial chips, this project would be a good resource to study.

[via YourlTronics]

Toool Picksets At The Last HOPE

July 12, 2008 by 14 Comments

Speaking of laser engraving, the blackbag blog announced that Toool has designed 2 unique picksets for The Last HOPE this year. First is the credit card sized snap-off set seen above. They have named this one The Last HOPE emergency pickset. The other pickset is a new version of the ‘double sided pick’ series. This set consists of picks with the same tool on either end, but they are sized differently. This set will contain 8 picks with promised improvements. If you are interested in more complex picks, check out the centipede.

Epilog Zing Personal Laser Etching

July 12, 2008 by 13 Comments

The new Epilog Zing is designed to bring laser engraving to the home for personal use. It’s got 25 watts of power, a small enough footprint to fit neatly on your desk, and the video above shows it has a pretty high resolution. But compared to the mini18, the Zing has less Z movement, a lower wattage, a smaller engraving area, and about half the speed. Also, with a price set around $8,000, we don’t think many people will be buying them for personal use just yet. However, if you have a small home business that requires these services, the Zing could be perfect. If you are looking for more information on laser engraving, see [ladyada’s] laser information page.

[via Engadget]