MRRF: ARM-Based CNC Controllers

March 17, 2014 by Brian Benchoff 23 Comments

8-bit microcontrollers are the standard for RepRap electronics, but eventually something better must come along. There has been a great deal of progress with ARM-based solutions, and of course a few of these made a showing at the Midwest RepRap Festival.

First up is [Mark Cooper], creator of Smoothieboard, the ultimate RepRap and CNC controller. It’s an ARM Cortex-M3 microcontroller with Ethernet, SD card, and up to five stepper drivers. It had a Kickstarter late last year and has just finished shipping all the rewards to the backers. In our video interview, [Mark] goes over the functions of Smoothieboard and tells us about some upcoming projects: the upcoming Smoothiepanel will feature a graphic LCD, SD card, rotary encoder and buttons, all controlled over USB by the Smoothieboard.

Next up is [Charles] with a whole bunch of CNC capes for the Beaglebone. By far the most impressive board was a huge I/O expander, motor driver, and everything controller for a Beaglebone featuring – get this – three parallel port interfaces. This was a one-off board costing thousands of dollars, but [Charles] did show off a few smaller and more practical boards for Beaglebone CNC control. Here’s a link to [Charles]’ capes.

Videos below.

Continue reading “MRRF: ARM-Based CNC Controllers” →

MRRF: 3D Printed Resin Molds

March 16, 2014 by Brian Benchoff 26 Comments

Visiting the Midwest RepRap Festival, you will, of course, find a ton of 3D printed baubles and trinkets. A slightly more interesting find at this year’s MRRF was a lot of resin cast parts from [Mark VanDiepenbos]. He’s the guy behind the RotoMAAK, a spinny, ‘this was in the movie Contact‘-like device designed for spin casting with resins. At the festival, he’s showing off his latest project, 3D printed resin molds.

With the right mold, anyone with 2-part resins can replicate dozens of identical parts in an hour. The only problem is you need a mold to cast the parts. You could print a plastic part and make a silicone mold to cast your part. The much more clever solution would be to print the mold directly and fill it with resin.

[Mark] printed the two-part rabbit mold seen above out of ABS, filled it with urethane resin, and chucked it into his RotoMAAK spin casting machine. Six minutes later the part popped right out, and the mold was ready to make another rabbit.

Video below.

Continue reading “MRRF: 3D Printed Resin Molds” →

MRRF: CoreXZ

March 15, 2014 by Rich Bremer 13 Comments

It is mid-day Saturday and the Midwest RepRap Festival is in full swing. Saying that there is a lot of 3D printers here is an extreme understatement. There must be at least 100. Out of all these, there are a couple that stand out from the rest due to their non-standard geometry. These are both creations of [Nicholas Seward], called the Wally and Simpson.

Both of these printers were designed to not use linear rails or bearings and be as reprap-able as possible. For example, the Simpson’s only non-printed custom parts are the two wooden base plates and the print bed. The rest of the parts are general hardware and standard 3D printer electronics.

[Nicholas] is showing off something new this weekend (less than 2 weeks new, actually). It is a new printer, currently code named CoreXZ. Unlike his previous designs, the CoreXZ does use linear rails and bearings. The frame is laser cut and is held together with zip ties. This new design uses an h-bot style setup for movements in the X and Z axes. The Y axis is a standard moving bed design with linear rails and bearings.

Continue reading “MRRF: CoreXZ” →

E-Nable(ing) Shea To Build A Prosthetic Hand For Herself!

March 15, 2014 by James Hobson 34 Comments

b99205013z.1_20140303145537_000_g5v53kia.2-1

Here’s a heartwarming story for the day. Introducing [Shea], a little 9-year-old girl with a prosthetic hand made possible from a community of internet strangers!

She was born with only the palm of her right hand and a two-digit thumb — no fingers. Despite this day and age, prosthetics aren’t generally that good, or affordable — especially for a quickly growing young girl. So when [Shea] asked for a new hand from Santa before Christmas, her mom, [Ranee], started doing some research online. She had seen 3D printed prosthetics through Facebook posts and managed to track down the E-Nable group, which is a community of maker’s dedicated to lending a hand — quite literally.

The group got her in touch with [Nick Parker], a high school student and robotics enthusiast from California eager to help, who then introduced her (online) to his local Makerspace — from there they connected with the Milwaukee Makerspace (closer to home), and [Frankie Flood], an associate professor at the University of Wisconsin-Milwaukee.

Continue reading “E-Nable(ing) Shea To Build A Prosthetic Hand For Herself!” →

Kinect + Wiper Motor + LEGO = 3D Scanner

March 9, 2014 by Rich Bremer 5 Comments

[Christopher] from the Bamberg Germany hackerspace, [Backspace], wrote in to tell us about one of the group’s most recent projects. It’s a Kinect-based 3D scanner (translated) that has been made mostly from parts lying around the shop.

There are 2 main components to the hardware-side of this build; the Kinect Stand and the Rotating Platform. The Kinect sits atop a platform made from LEGO pieces. This platform rides up and down an extruded aluminum rail, powered by an old windshield wiper motor.

The Rotating Platform went through a couple of iterations. The first was an un-powered platform supported by 5 roller blade wheels. The lack of automatic rotation didn’t work out so well for scanning so out came another windshield wiper motor which was strapped to an old office chair with the seat replaced by a piece of MDF. This setup may not be the best for the acrophobic, but the scan results speak for themselves.

Continue reading “Kinect + Wiper Motor + LEGO = 3D Scanner” →

Next Weekend: The Midwest Reprap Festival

March 9, 2014 by Brian Benchoff 1 Comment

midwest

Guess what next weekend is? It’s the Midwest Reprap Festival, in Goshen, Indiana. We’ll also be there keeping tabs on an absurd amount of new RepRaps and other 3D printers, new filaments, and distributing a ludicrous amount of Hackaday swag.

The highlights of the fest include the folks from Lulzbot and UltiMachine, [Prusa] showing off his i3, [Nick Seward] and the Wally, Simpson, and Lisa RepRaps, and hundreds of other RepRappers showing off their latest projects and printers.

Here’s the best part: it’s all free! It would be cool if you register before making the trip out, but any way you look at it, it’ll be an awesome weekend. It’s also the largest US gathering of 3D printer aficionados that isn’t on the east or west coast.

The LATHON Dual Nozzle 3D Printer

March 8, 2014 by Marsh 24 Comments

lathon

Our friends at Freeside Atlanta have been keeping busy despite the city-stopping snowstorms they’ve been suffering recently. This time it’s a 3D printer with dual extrusion: the LATHON printer. [Nohtal] bought his first 3D printer only two years ago, but his experiences led him to build his own to overcome some of the issues he encountered with standard printers.

The LATHON keeps the bed stable and instead moves only the nozzles, using Bowden extrusion to reduce the weight on the moving parts. A key feature is the addition of a second nozzle, which usually limits the print area. The LATHON, however, maintains a 12″x9″x8″ build volume thanks to the Bowden extruders. [Nohtal] documents the majority of his build process on Freeside’s blog, including using a plastic from GE called Ultem 2300 for the print bed, and running the printer through its paces with a slew of materials: ABS, PLA, HIPS, Nylon, TPE, Wood, and Carbon Fiber. You can find more information on the Kickstarter page or at lathon.net

Check out some videos below!

Continue reading “The LATHON Dual Nozzle 3D Printer” →