Arduino Rover Evolves To A Trike Design

July 5, 2012 by Mike Szczys No comments

[Eduard Ros] wrote in to show off the latest version of his Arduino powered autonomous rover (translated). You may remember seeing the first version of the build back in June. It started with a remote control truck body, adding an Arduino and some ultrasonic sensors for obstacle avoidance.

The two big wheels and the pair of sensors look familiar, but most of the other components are a different from that version. The biggest change is the transition from four wheels to just three. This let him drop the servo motor which controlled steering. At first glance we though this thing was going to pop some mad wheelies, but the direction of travel actually drags the third wheel being the larger two. The motors themselves are different, this time depending on gear-reduced DC motors. The motor H-bridge is the same, but [Eduard] used a simple transistor-based inverter to reduce the number of pins needed to activate it from two down to just one. He also moved from an Arduino Uno to a Nano to reduce the footprint of the controller.

Wireless Bullduino Belt Buckle Sets The Stage For Romance, Schtick

July 4, 2012 by Mike Nathan 19 Comments

redbull-romance-pants

As the Red Bull Creation Contest gets underway, we’re seeing a ton of great entries, including this one put together by [Team Instructables]. While we are pretty partial to our own spectacular Red Bull Cannon, it’s hard to deny that there is some stiff competition out there.

Instructables’ “Romance Pants” are a creation that would undoubtedly fit perfectly as a prop piece for any of the Naked Gun movies. The basic premise behind the pants is that when unzipped, the Bullduino belt buckle wirelessly signals the lights in the room to dim, the music to turn up, and candles to light – setting the mood for romance.

Some might argue that anyone wearing a Red Bull-themed Arduino as a belt buckle would have a snowball’s chance in hell of encountering a potential mate – We can’t really argue with you there. That said, their concept is pretty amusing.

Stick around to see the Romance Pants in action, as well as a behind the scenes look at how they work.

[Thanks, Bill!]

Continue reading “Wireless Bullduino Belt Buckle Sets The Stage For Romance, Schtick” →

Junkyard Scavenging Nets A Tachometer To Play With

July 2, 2012 by Mike Szczys 13 Comments

We never thought to hit the automotive junkyard to find electronics we could play with. But [Istimat] was able to pull this working tachometer from an otherwise destroyed motorcycle dashboard. The Kawasaki part has just three pins on the back of it. By connecting 12V to the IGN pin, ground to GND, and tapping a 12V wire on the unlabeled pin he was able to make the needle dance and knew he was getting somewhere.

His microcontroller of choice for the project is an Arduino board. But the 5V logic levels aren’t going to put out the square wave needed to drive the device. A search of the internet led him to a 2-transistor circuit which lets him get the results seen in the video. His plan is to add functionality that uses the Arduino to pull data in from just about any source and display it on the dial. That computer desk that featured all the CPU load readouts immediately comes to mind.

Do you think the square wave circuit is more complicated than necessary? Could this be done with just one NPN transistor and a pair of resistors?

Continue reading “Junkyard Scavenging Nets A Tachometer To Play With” →

Codebender: An Online Arduino IDE

July 1, 2012 by Brian Benchoff 28 Comments

Because everything is moving to a web app, [Vasilis Georgitzikis], a.k.a. [tzikis] developed codebender, a cloud-based Arduino IDE replete with built-in libraries, documentation, and the ability to upload your code to an Arduino from a browser.

To compile an Arduino sketch, codebender uses clang a wonderful compiler that will give you extremely descriptive warnings on terrible code. Like any good IDE, there’s built-in highlighting and documentation, and a small bit of Java allows you to upload your code and monitor the serial port right in the browser.

One of the more interesting innovations is codebender’s (upcoming) use of a TFTP bootloader. With this and an Ethernet shield, it’s easy to upload code to any Internet-connected Arduino, whether it’s on your desk or halfway across the world. We can see that being very useful for a data logger or even a UAV balloon, and can’t wait to see it in action.

Turning An Arduino Into A USB Keyboard

June 29, 2012 by Brian Benchoff 23 Comments

The newly released Arduino Leonardo has a few very interesting features, most notably the ability to act as a USB keyboard and mouse thanks to the new ATmega 32U4 microcontroller. This feature isn’t exclusive to the Leonoardo, as [Michael] explains in a build he sent in – the lowly Arduino Uno can also serve as a USB HID keyboard with just a firmware update.

The Arduino Uno (and Mega) communicate to your computer through a separate ATmega8U2 microcontroller. Simply by uploading new firmware with the Arduino Device Firmware Upgrade, it’s easy to have your old Arduino board gain some of the features of newer boards such as the Teensy or Leonardo.

[Michael] goes through the steps required to make this upgrade work and ends his build by showing off an Arduinofied ‘cut, copy and paste’ button project as well as a few multimedia controls. You can check those builds out in the video after the break.

If emulating a USB keyboard isn’t your thing, it’s also possible to install LUFA firmware to emulate everything from joysticks to USB audio devices. Very cool, and very useful.

Continue reading “Turning An Arduino Into A USB Keyboard” →

Bike Cross Country In Your Basement With Google Streetview

June 26, 2012 by Brian Benchoff 11 Comments

Biking cross-country is a worthwhile pursuit, but then you’ll have to deal with terrible drivers, rain, bugs, and heat. [Jeff Adkins] over at lowendmac has a neat solution to exploring the country via bicycle without ever leaving the safety and air conditioning of your basement.

For his build, [Jeff] used a magnetic reed switch attached to the frame of his stationary bike and the pedal crank. Whenever the pedal crank is turned, a reed switch closes on every revolution. This reed switch is connected to a new Arduino Leonardo programmed to transmit keyboard presses to a computer for every five revolutions of the pedal. From there, it’s a simple matter of loading up Google Streetview on a laptop and letting the Arduino automatically advance through Streetview images while pedaling.

The next part of [Jeff]’s project will be adding left and right buttons to his stationary bike to navigate Google Streetview images without taking his hands off the handlebars. You can check out a demo of [Jeff] cruising around after the break.

via reddit

Continue reading “Bike Cross Country In Your Basement With Google Streetview” →

Taking A Dump From Some Old Hardware

June 26, 2012 by Mike Szczys 30 Comments

NYC Resistor shows you how to have some fun with electronics from the junk bin. Their post called The Joy of Dumping encourages you to look around for older memory chips and see what they’ve been hiding away for all these years.

The targets of their hunt are EPROM chips. Note the single ‘E’. These are Erasable Programmable Read-Only Memory chips, and predate EEPROM which adds “Electrically” to the beginning of the acronym. You used to use a UV light source to erase the older types of memory. In fact we’ve seen some EPROM erasers as projects from time to time. These shouldn’t be too hard to find as they were prevalent as cheap storage back in the 1980’s.

If the quartz window on the top of the chips has been shielded from ambient UV light, you should still be able to read them and it’s as easy as hooking up your Arduino. Is it useful? Not really, but it still can be neat to interface with what might otherwise never make its way back out of the junk box.